Standard cell automated layout for a CMOS 50 MHz 8 × 8 bit pipelined parallel dadda multiplier

An 8 × 8 pipelined parallel multiplier which uses the Dadda scheme is presented. The multiplier has been implemented in a 3-μm n-well CMOS process with two layers of metal using a standard cell automatic placement and routing program. The design uses a form of pipelined carry look-ahead adder in the final stage of summation, thus providing a significant contribution to the high performance of the multiplier. The design is expected to operate at a clock frequency of at least 50 MHz and has a flush time of seven clock cycles. The design illustrates a possible method of implementing an irregular architecture in VLSI using multiple levels of low-resistance, low-capacitance interconnect and automated layout techniques.

10-Gbit/s transmission over 300-m standard multimode fiber using multilevel coding and 2-channel WDM

A combination of multilevel coding schemes and simple two-channel wavelength division multiplexing (WDM) at 1300 and 1550 nm was used to transmit an aggregate of 10 Gbit/s over 300 m of multimode fiber that is typical of that employed in current Local Area Networks (LANs). It was shown that this technique could be a simple solution for achieving 10 Gigabit ethernet links over installed multimode fiber building backbones.

How to avoid the problems of target-setting

Purpose: Advocates and critics of target-setting in the workplace seem unable to reach beyond their own well-entrenched battle lines. While the advocates of goal-directed behaviour point to what they see as demonstrable advantages, the critics of target-setting highlight equally demonstrable disadvantages. Indeed, the academic literature on this topic is currently mired in controversy, with neither side seemingly capable of envisaging a better way forward. This paper seeks to break the current deadlock and move thinking forward in this important aspect of performance measurement and management by outlining a new, more fruitful approach, based on both theory and practical experience. Design/methodology/approach: The topic was approached in three phases: assembling and reading key academic and other literature on the subject of target-setting and goal-directed behaviour, with a view to understanding, in depth, the arguments advanced by the advocates and critics of target-setting; comparing these published arguments with one's own experiential findings, in order to bring the essence of disagreement into much sharper focus; and then bringing to bear the academic and practical experience to identify the essential elements of a new, more fruitful approach offering all the benefits of goal-directed behaviour with none of the typical disadvantages of target-setting. Findings: The research led to three key findings: the advocates of goal-directed behaviour and critics of target-setting each make valid points, as seen from their own current perspectives; the likelihood of these two communities, left to themselves, ever reaching a new synthesis, seems vanishingly small (with leading thinkers in the goal-directed behaviour community already acknowledging this); and, between the three authors, it was discovered that their unusual combination of academic study and practical experience enabled them to see things differently. Hence, they would like to share their new thinking more widely. Research limitations/implications: The authors fully accept that their paper is informed by extensive practical experience and, as yet, there have been no opportunities to test their findings, conclusions and recommendations through rigorous academic research. However, they hope that the paper will move thinking forward in this arena, thereby informing future academic research. Practical implications: The authors hope that the practical implications of the paper will be significant, as it outlines a novel way for organisations to capture the benefits of goal-directed behaviour with none of the disadvantages typically associated with target-setting. Social implications: Given that increased efficiency and effectiveness in the management of organisations would be good for society, the authors think the paper has interesting social implications. Originality/value: Leading thinkers in the field of goal-directed behaviour, such as Locke and Latham, and leading critics of target-setting, such as Ordóñez et al. continue to argue with one another - much like, at the turn of the nineteenth century, proponents of the "wave theory of light" and proponents of the "particle theory of light" were similarly at loggerheads. Just as this furious scientific debate was ultimately resolved by Taylor's experiment, showing that light could behave both as a particle and wave at the same time, the authors believe that the paper demonstrates that goal-directed behaviour and target-setting can successfully co-exist. © Emerald Group Publishing Limited.

Implications of local lifecycle analyses and low carbon fuel standard design on gasohol transportation fuels

State and regional policies, such as low carbon fuel standards (LCFSs), increasingly mandate that transportation fuels be examined according to their greenhouse gas (GHG) emissions. We investigate whether such policies benefit from determining fuel carbon intensities (FCIs) locally to account for variations in fuel production and to stimulate improvements in FCI. In this study, we examine the FCI of transportation fuels on a lifecycle basis within a specific state, Minnesota, and compare the results to FCIs using national averages. Using data compiled from 18 refineries over an 11-year period, we find that ethanol production is highly variable, resulting in a 42% difference between carbon intensities. Historical data suggests that lower FCIs are possible through incremental improvements in refining efficiency and the use of biomass for processing heat. Stochastic modeling of the corn ethanol FCI shows that gains in certainty due to knowledge of specific refinery inputs are overwhelmed by uncertainty in parameters external to the refiner, including impacts of fertilization and land use change. The LCA results are incorporated into multiple policy scenarios to demonstrate the effect of policy configurations on the use of alternative fuels. These results provide a contrast between volumetric mandates and LCFSs. © 2011 Elsevier Ltd.

The foundations of a new approach to additive manufacturing: Characteristics of free space metal deposition

In this paper, we report on the realisation of a free space deposition process (FSD). For the first time the use of a moving support structure to deposit tracks of metal starting from a substrate and extending into free space is characterised. The ability to write metal shapes in free space has wide ranging applications in additive manufacturing and rapid prototyping where the tracks can be layered to build overhanging features without the use of fixed support structures (such as is used in selective laser melting (SLM) and stereo lithography (SLA)). We demonstrate and perform a preliminary characterisation of the process in which a soldering iron was used to deposit lead free solder tracks. The factors affecting the stability of tracks and the effect of operating parameters, temperature, velocity, initial track starting diameter and starting volume were measured. A series of 10 tracks at each setting were compared with a control group of tracks; the track width, taper and variation between tracks were compared. Notable results in free space track deposition were that the initial track diameter and volume affected the repeatability and quality of tracks. The standard deviation of mean track width of tracks from the constrained initial diameter group were half that of the unconstrained group. The amount of material fed to the soldering iron before commencing deposition affected the taper of tracks. At an initial volume of 7 mm3 and an initial track diameter of 0.8 mm, none of the ten tracks deposited broke or showed taper > ∼1°. The maximum deposition velocity for free space track deposition using lead-free solder was limited to 1.5 mm s-1. © 2011 Elsevier B.V. All rights reserved.

Long term peripheral nerve regeneration using a novel PCL nerve conduit.

The gold standard in surgical management of a peripheral nerve gap is currently autologous nerve grafting. This confers patient morbidity and increases surgical time therefore innovative experimental strategies towards engineering a synthetic nerve conduit are welcome. We have developed a novel synthetic conduit made of poly ε-caprolactone (PCL) that has demonstrated promising peripheral nerve regeneration in short-term studies. This material has been engineered to permit translation into clinical practice and here we demonstrate that histological outcomes in a long-term in vivo experiment are comparable with that of autologous nerve grafting. A 1cm nerve gap in a rat sciatic nerve injury model was repaired with a PCL nerve conduit or an autologous nerve graft. At 18 weeks post surgical repair, there was a similar volume of regenerating axons within the nerve autograft and PCL conduit repair groups, and similar numbers of myelinated axons in the distal stump of both groups. Furthermore, there was evidence of comparable re-innervation of end organ muscle and skin with the only significant difference the lower wet weight of the muscle from the PCL conduit nerve repair group. This study stimulates further work on the potential use of this synthetic biodegradable PCL nerve conduit in a clinical setting.