La inseparabilidad y el grado de adaptación como determinantes de la internacionalización de las empresas de servicios

[ES] La mayor parte de enfoques teóricos de internacionalización han surgido en el marco del sector industrial y, por tanto, algunas explicaciones podrían no ser generalizables al sector servicios en su globalidad. Por ello, las características sectoriales deben ser tenidas en cuenta en el análisis de los modos de entrada de las empresas de servicios, ya que es posible encontrar patrones de comportamiento muy diferentes no sólo con respecto a las empresas industriales sino también entre las propias empresas de servicios.

Valuing Flexibility: The case of an Integrated Gasification Combined Cycle Power Plant

In this paper we analyze the valuation of options stemming from the flexibility in an Integrated Gasification Combined Cycle (IGCC) Power Plant. First we use as a base case the opportunity to invest in a Natural Gas Combined Cycle (NGCC) Power Plant, deriving the optimal investment rule as a function of fuel price and the remaining life of the right to invest. Additionally, the analytical solution for a perpetual option is obtained. Second, the valuation of an operating IGCC Power Plant is studied, with switching costs between states and a choice of the best operation mode. The valuation of this plant serves as a base to obtain the value of the option to delay an investment of this type. Finally, we derive the value of an opportunity to invest either in a NGCC or IGCC Power Plant, that is, to choose between an inflexible and a flexible technology, respectively. Numerical computations involve the use of one- and two-dimensional binomial lattices that support a mean-reverting process for the fuel prices. Basic parameter values refer to an actual IGCC power plant currently in operation.

Choice of Flexible Production Technologies Under Strategic Delegation

This work analyzes a managerial delegation model in which firms can choose between a flexible production technology which allows them to produce two different products and a dedicated production technology which limits production to only one product. We analyze whether the incentives to adopt the flexible technology are smaller or greater in a managerial delegation model than under strict profit maximization. We obtain that the asymmetric equilibrium in which only one firm adopts the flexible technology can be sustained under strategic delegation but not under strict profit maximization when products are substitutes. We extend the analysis to consider welfare implications.

Optimal Correction for Guessing in Multiple-Choice Tests

Building on Item Response Theory we introduce students’ optimal behavior in multiple-choice tests. Our simulations indicate that the optimal penalty is relatively high, because although correction for guessing discriminates against risk-averse subjects, this effect is small compared with the measurement error that the penalty prevents. This result obtains when knowledge is binary or partial, under different normalizations of the score, when risk aversion is related to knowledge and when there is a pass-fail break point. We also find that the mean degree of difficulty should be close to the mean level of knowledge and that the variance of difficulty should be high.

On the strategic equivalence of multiple-choice test scoring rules

A disadvantage of multiple-choice tests is that students have incentives to guess. To discourage guessing, it is common to use scoring rules that either penalize wrong answers or reward omissions. These scoring rules are considered equivalent in psychometrics, although experimental evidence has not always been consistent with this claim. We model students' decisions and show, first, that equivalence holds only under risk neutrality and, second, that the two rules can be modified so that they become equivalent even under risk aversion. This paper presents the results of a field experiment in which we analyze the decisions of subjects taking multiple-choice exams. The evidence suggests that differences between scoring rules are due to risk aversion as theory predicts. We also find that the number of omitted items depends on the scoring rule, knowledge, gender and other covariates.

Landscape valuation through discrete choice experiments: Current practice and future research reflections

This work has been presented in: V Conference AERNA, Faro (Portugal), 30 May 2012-1 June 2012 and IV Workshop on Valuation Methods in Agro-food and Environmental Economics, Castelldefels (Barcelona, Spain), 12 July 2012-13 July 2012.

Crystal structure and phase transition studies in perovskite-type oxides using powder-diffraction techniques and symmetry-mode analysis : SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni,Fe) and ALn2CuTi2O9 (A=Ca,Ba; Ln=La,Pr,Nd,Sm)

La tesis se ha centrado en la síntesis y caracterización estructural de materiales tipo perovskita: SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni,Fe) y ALn2CuTi2O9 (A=Ca,Ba; Ln=La,Pr,Nd,Sm). El estudio de las estructuras de los materiales se ha realizado mediante el análisis de los patrones de difracción en polvo de rayos-X, sincrotrón y/o neutrones. En el refinamiento por el método de Rietveld de las estructuras se han sustituido las coordenadas atómicas (el método más común), por coordenadas colectivas: las amplitudes de los modos que describen la distorsión de la fase prototipo. Los resultados generales para la serie SrLnMRuO6 (Ln=La,Pr,Nd; M=Zn,Co,Mg,Ni) a temperatura ambiente se ha recogido en un diagrama en el que se han indicado las amplitudes de los modos que transforman de acuerdo a las irreps en función del factor de tolerancia, ya que todos ellos cristalizan en la misma fase monoclínica (P21/n); y a temperaturas altas se ha construido un diagrama de fase. Los materiales SrLnFeRuO6 ( Ln=La,Pr,Nd) y CaLn2CuTi2O9 cristalizan en la fase ortorrómbica Pbnm a temperatura ambiente; mientras que BaLn2CuTi2O9 tienen una estructura más simétrica, I4/mcm. A altas temperaturas se han identificado las transiciones de fase inducidas por el cambio de temperatura.A temperaturas bajas se han analizado las estructuras magnéticas de algunos de los compuestos mediante difracción de neutrones.

Robust Sliding Mode Control for Tokamaks

Nuclear fusion has arisen as an alternative energy to avoid carbon dioxide emissions, being the tokamak a promising nuclear fusion reactor that uses a magnetic field to confine plasma in the shape of a torus. However, different kinds of magnetohydrodynamic instabilities may affect tokamak plasma equilibrium, causing severe reduction of particle confinement and leading to plasma disruptions. In this sense, numerous efforts and resources have been devoted to seeking solutions for the different plasma control problems so as to avoid energy confinement time decrements in these devices. In particular, since the growth rate of the vertical instability increases with the internal inductance, lowering the internal inductance is a fundamental issue to address for the elongated plasmas employed within the advanced tokamaks currently under development. In this sense, this paper introduces a lumped parameter numerical model of the tokamak in order to design a novel robust sliding mode controller for the internal inductance using the transformer primary coil as actuator.

Sliding Mode Control Strategy for Wind Turbine Power Maximization

The efficiency of the wind power conversions systems can be greatly improved using an appropriate control algorithm. In this work, a sliding mode control for variable speed wind turbine that incorporates a doubly fed induction generator is described. The electrical system incorporates a wound rotor induction machine with back-to-back three phase power converter bridges between its rotor and the grid. In the presented design the so-called vector control theory is applied, in order to simplify the electrical equations. The proposed control scheme uses stator flux-oriented vector control for the rotor side converter bridge control and grid voltage vector control for the grid side converter bridge control. The stability analysis of the proposed sliding mode controller under disturbances and parameter uncertainties is provided using the Lyapunov stability theory. Finally simulated results show, on the one hand, that the proposed controller provides high-performance dynamic characteristics, and on the other hand, that this scheme is robust with respect to the uncertainties that usually appear in the real systems.

Sliding mode position control for real-time control of induction motors

A sliding mode position control for high-performance real-time applications of induction motors in developed in this work. The design also incorporates a simple flux estimator in order to avoid the flux sensors. Then, the proposed control scheme presents a low computational cost and therefore can be implemented easily in a real-time applications using a low cost DSP-processor. The stability analysis of the controller under parameter uncertainties and load disturbances in provided using Lyapunov stability theory. Finally, simulated and experimental results show that the proposed controller with the proposed observer provides a good trajectory tracking and that this scheme is robust with respect to plant parameter variations and external load disturbances.

Sliding mode control law for a variable speedwind turbine

Modern wind turbines are designed in order to work in variable speed operations. To perform this task, wind turbines are provided with adjustable speed generators, like the double feed induction generator. One of the main advantage of adjustable speed generators is improving the system efficiency compared to fixed speed generators, because turbine speed can be adjusted as a function of wind speed in order to maximize the output power. However this system requires a suitable speed controller in order to track the optimal reference speed of the wind turbine. In this work, a sliding mode control for variable speed wind turbines is proposed. An integral sliding surface is used, because the integral term avoids the use of the acceleration signal, which reduces the high frequency components in the sliding variable. The proposed design also uses the vector oriented control theory in order to simplify the generator dynamical equations. The stability analysis of the proposed controller has been carried out under wind variations and parameter uncertainties by using the Lyapunov stability theory. Finally simulated results show, on the one hand that the proposed controller provides a high-performance dynamic behavior, and on the other hand that this scheme is robust with respect to parameter uncertainties and wind speed variations, that usually appear in real systems.

An adaptive sliding mode control law for the power maximization of the wind turbine system

POWERENG 2011

Sliding mode control strategy for variable speed wind turbines

EFTA 2009

Choice under Risk : Theory and Applications

Es útil para estudiantes de postgrado (Master y Doctorado) en cursos de Economía o de Microeconomía en los que se analicen problemas de Decisión en condiciones de Riesgo o Incertidumbre. El documento comienza explicando la Teoría de la Utilidad Esperada. A continuación se estudian la aversión al riesgo, los coeficientes de aversión absoluta y relativa al riesgo, la relación “más averso que” entre agentes económicos y los efectos riqueza sobre las decisiones en algunas relaciones de preferencia utilizadas frecuentemente en el análisis económico. La sección 4 se centra en la comparación entre alternativas arriesgadas en términos de rendimiento y riesgo, considerando la dominancia estocástica de primer y segundo orden y algunas extensiones posteriores de esas relaciones de orden. El documento concluye con doce ejercicios resueltos en los que se aplican los conceptos y resultados expuestos en las secciones anteriores a problemas de decisión en varios contextos

Valuing a Natura 2000 network site to inform land use options using a discrete choice experiment: An illustration from the Basque Country

One of the main problems that public institutions face in the management of protected areas, such as the European Natura 2000 network, is determining how to design and implement sustainable management plans that account for the wide range of marketed and non-marketed benefits they provide to society. This paper presents an application of a stated preference valuation approach aimed at evaluating the social preferences of the population of the Basque Country, Spain, for the key attributes of a regional Natura 2000 network site. According to our results, individuals’ willingness-to-pay (WTP) is higher for attributes associated with non-use values (native tree species and biodiversity conservation) than for attributes associated with use values (agricultural development and commercial forestry). The paper concludes that management policies related to Natura 2000 network sites should account for both for the importance of non-use values and the heterogeneity of the population's preferences in order to minimize potential land use conflicts.