Miscibility and Hydrogen Bonding in Blends of Poly(4-vinylphenol)/Poly(vinyl methyl ketone)

The miscibility and phase behavior of poly(4-vinylphenol) (PVPh) with poly(vinyl methyl ketone) (PVMK) was investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). It was shown that all blends of PVPh/PVMK are totally miscible. A DSC study showed the apparition of a single glass transition (T-g) over their entire composition range. When the amount of PVPh exceeds 50% in blends, the obtained T(g)s are found to be significantly higher than those observed for each individual component of the mixture, indicating that these blends are capable of forming interpolymer complexes. FTIR analysis revealed the existence of preferential specific interactions via hydrogen bonding between the hydroxyl and carbonyl groups, which intensified when the amount of PVPh was increased in blends. Furthermore, the quantitative FTIR study carried out for PVPh/PVMK blends was also performed for the vinylphenol (VPh) and vinyl methyl ketone (VMK) functional groups. These results were also established by scanning electron microscopy study (SEM).

Poly(lactic acid)-based bio-blends and nanocomposites

172 p.

Improved Mechanical Properties of Compatibilized Polypropylene/Polyamide-12 Blends

Compatibilized blends of polypropylene (PP) and polyamide-12 (PA12) as a second component were obtained by direct injection molding having first added 20% maleic anhydride-modified copolymer (PP-g-MA) to the PP, which produced partially grafted PP (gPP). A nucleating effect of the PA12 took place on the cooling crystallization of the gPP, and a second crystallization peak of the gPP appeared in the PA12-rich blends, indicating changes in the crystalline morphology. There was a slight drop in the PA12 crystallinity of the compatible blends, whereas the crystallinity of the gPP increased significantly in the PA12-rich blends. The overall reduction in the dispersed phase particle size together with the clear increase in ductility when gPP was used instead of PP proved that compatibilization occurred. Young's modulus of the blends showed synergistic behavior. This is proposed to be both due to a change in the crystalline morphology of the blends on the one hand and, on the other, in the PA12-rich blends, to the clear increase in the crystallinity of the gPP phase, which may, in turn, have been responsible for the increase in its continuity and its contribution to the modulus.

Amplicon metagenomics for elucidating microbial community changes associated to conventional and organic farming of Beta vulgaris and Solanum lycopersicum

Soil microbial community changes associated to conventional and organic farming of two relevant crops (Beta vulgaris and Solanum lycopersicum) were analysed through 16s rRNA amplicon sequencing. This study revealed microbial communities in the agricultural soils studied to be similar to other reported nutrient-rich microbiomes, and some significant differences between the microbial communities associated to the two farming practices were found. Some phyla (Chloroflexi and Thermi) were found to be present in different abundances according to soil treatment. As chloroplast interference can be a stumbling block in plant-associated 16s rRNA amplicon metagenomics analysis of aerial plant tissues, two protocols for bacterial cell detachment (orbital shaking and ultrasound treatment) and two protocols for microbial biomass recovery (centrifugation and filtration) were tested regarding their efficiency at excluding plant-DNA. An alternative method to the one proposed by Rastogi et al (2010) for evaluating the chloroplast-amplicon content in post-PCR samples was tested, and the method revealed that filtration was the most efficient protocol in minimising chloroplast interference.