Relación de documentación en poder de Don Manuel de Irujo, y de la documentación transferida por el citado al Instituto de Historia Contemporánea "Bidasoa" el 6 de mayo de 1974.

Fecha: 1974 / Unidad de instalación: Carpeta 48 - Expediente 8-6 / Nº de pág.: 3 (mecanografiadas)

Stability of the factorial structure of metabolic syndrome from childhood to adolescence : a 6-year follow-up study

Background: Metabolic syndrome (MS) is a clustering of cardiometabolic risk factors that is considered a predictor of cardiovascular disease, type 2 diabetes and mortality. There is no consistent evidence on whether the MS construct works in the same way in different populations and at different stages in life. Methods: We used confirmatory factor analysis to examine if a single-factor-model including waist circumference, triglycerides/HDL-c, insulin and mean arterial pressure underlies metabolic syndrome from the childhood to adolescence in a 6-years follow-up study in 174 Swedish and 460 Estonian children aged 9 years at baseline. Indeed, we analyze the tracking of a previously validated MS index over this 6-years period. Results: The estimates of goodness-of-fit for the single-factor-model underlying MS were acceptable both in children and adolescents. The construct stability of a new model including the differences from baseline to the end of the follow-up in the components of the proposed model displayed good fit indexes for the change, supporting the hypothesis of a single factor underlying MS component trends. Conclusions: A single-factor-model underlying MS is stable across the puberty in both Estonian and Swedish young people. The MS index tracks acceptably from childhood to adolescence.

Construir relaciones en entornos educativos para la infancia (0-6): la entrevista en la escuela infantil

351 p.

The Role of the Subthalamic Nucleus in L-DOPA Induced Dyskinesia in 6-Hydroxydopamine Lesioned Rats

14 p.

Toxicity of DBPDE and antitoxic activity of 6 antioxidants on XEM2 cells

Los hidrocarburos aromáticos policíclicos (PAHs) son un grupo de compuestos mutagénicos a los que los seres vivos estamos expuestos continuamente. En la primera fase del metabolismo de estos xenobióticos se generan epóxidos, intermediarios reactivos, capaces de generar aductos con el DNA produciendo lesiones en el material genético. Además, también se generan especies reactivas de oxígeno (ROS) que causan estrés oxidativo dañando las células. Este tipo de lesiones puede conducir a la aparición de cáncer y enfermedades neurodegenerativas como el Alzehimer, la enfermedad de Parkinson y la distrofia lateral amiotrófica. Ciertos compuestos denominados antioxidantes tienen capacidad de combatir estos radicales reactivos. Este estudio tiene como objetivo analizar el efecto de seis antioxidantes (Coenzima Q10, butil hidroxianisol, silibin, licopeno, turmérico y 6-gingerol) frente a la toxicidad de uno de estos intermediarios reactivos, el (±)-anti-11, 12-dihidróxido-13,14-epóxido- 11,12,13,14-tetrahidrodibenzo[a, l]pireno (DBPDE) en células XEM2 de mamífero. Se empleó el ensayo de mutación HPRT para determinar la tasa de supervivencia y la frecuencia de mutación de las células después de ser tratadas con el DBPDE y los antioxidantes. La toxicidad del DBPDE se comprobó y se observó dos posibles efectos para los antioxidantes. Por un lado, la CoQ10 y el 6-gingerol mostraron un efecto protector frente al PAH. Sin embargo, los otros antioxidantes no presentaron efecto protector. El BHA, el silibin, el licopeno y el turmérico presentaron una toxicidad similar a la del DBPDE. Esto puede ser debido a que los antioxidantes son específicos en el tipo de radicales que neutralizan y a la dosis empleada. Los antioxidantes solo tienen efecto protector cuando se emplea su dosis óptima. En otras concentraciones pueden ser incluso dañinos.

Evaluación de la incontinencia urinaria de esfuerzo en primigravidas a termino. Seguimiento a los 6, 12 y 24 meses postparto

pag. var.: il.

Serie Vídeos tutoriales para fonética. Video 6. Praat: doing phonetics by computer (Parte 2: Propiedades acústicas de los sonidos del habla observables en oscilogramas)

Esta es una colección de 10 vídeos tutoriales que pueden ser empleados como material educativo en los cursos de fonética básica en el ámbito universitario. Los vídeos 1-3 tratan aspectos relacionados con la grabación: el tipo de micrófonos que se emplean, las clases de espacios en las que se suelen llevar a cabo la captura de señales de audio y las grabadoras que se suelen emplear. El vídeo 4 explora técnicas de captura y observación de datos de flujo y presión en fonética aerodinámica. Los vídeos 5-10 presentan información sobre los principales usos que se le brindan al programa Praat (Boersma y Weenink, 2014) en los estudios actuales de fonética acústica, desde la clase de información sobre modos de articulación de las consonantes que se puede identificar en oscilogramas hasta la creación de señales sonoras sintetizadas por medio de unos procedimientos que tiene el programa para tal propósito, los cuales son susceptibles de ser empleados en experimentos de percepción auditiva.

Serie Vídeos tutoriales para fonética. Video 10. Praat: doing phonetics by computer (Parte 6: Manipulación y síntesis de señales sonoras)

Esta es una colección de 10 vídeos tutoriales que pueden ser empleados como material educativo en los cursos de fonética básica en el ámbito universitario. Los vídeos 1-3 tratan aspectos relacionados con la grabación: el tipo de micrófonos que se emplean, las clases de espacios en las que se suelen llevar a cabo la captura de señales de audio y las grabadoras que se suelen emplear. El vídeo 4 explora técnicas de captura y observación de datos de flujo y presión en fonética aerodinámica. Los vídeos 5-10 presentan información sobre los principales usos que se le brindan al programa Praat (Boersma y Weenink, 2014) en los estudios actuales de fonética acústica, desde la clase de información sobre modos de articulación de las consonantes que se puede identificar en oscilogramas hasta la creación de señales sonoras sintetizadas por medio de unos procedimientos que tiene el programa para tal propósito, los cuales son susceptibles de ser empleados en experimentos de percepción auditiva.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Serie Vídeos tutoriales para fonética (volumen 2). Video 6. Diálogo entre pares que no son conscientes de ser grabados

Esta es una colección de 6 vídeos tutoriales que pueden ser empleados como material educativo en los cursos de fonética en el ámbito universitario. Tratan principalmente del cómo se puede obtener información desde las palabras aisladas, como se observa en las técnicas de los vídeos 1-2, pasando por datos obtenidos con participación del investigador, característica aún presente en los vídeos 3-4, hasta enunciados íntegros sin necesidad del investigador presente, tal como se ilustra en los vídeos 5-6. Se trata de establecer una reflexión entre la necesidad de identificar el grado de espontaneidad a la hora de brindar información por parte del hablante y la posibilidad (o la necesidad) de cuantificar los datos que se obtienen.

Diseño de un programa de Surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años

El objetivo de este trabajo es diseñar un programa de surf recreativo enfocado a colectivos con Síndrome de Down de 6 a 10 años. El Síndrome de Down se define como una discapacidad intelectual causada por una alteración en el par de cromosomas 21 (OMS, 2011). Resulta de especial relevancia el tratamiento de dicha discapacidad de manera no farmacológica, destacando la actividad física, en este caso el surf, como elemento inclusivo a nivel físico, psicológico y social. Se analizan distintos programas de Actividad Física en el medio acuático con personas con Síndrome de Down y se presenta el Surf como elemento que provoca grandes beneficios. A continuación se presenta el diseño de un programa que podría llevarse a cabo en un entorno cercano a nuestro territorio con un atractivo elevado ya que se trata de un proyecto innovador y beneficioso para personas con Síndrome de Down y sus familiares.

Efectos de la actividad física en la evolución de las relaciones interpersonales en alumnado de 5º y 6º de Primaria y 1º y 2º de Secundaria en campamento escolar de Vela

Hoy en día toda o casi toda la población de nuestra sociedad conocemos o bien de primera mano o de segunda mano los campamentos. Seguramente un alto porcentaje de la población haya estado en alguno, y el que no, habrá oído hablar de ellos. En los campamentos, se crea un caldo de cultivo idóneo para la socialización de los niños, ¿pero se les da las mismas oportunidades a todos? Un niño o niña con poca capacidad de socialización no va a tener las mismas oportunidades que los demás, por lo que es necesario buscar una metodología que ayude a la socialización de todos. Así pues, mediante este trabajo se plantea una metodología basada en la actividad física, y dentro de ella en los juegos cooperativos. Se analizará si con la utilización de juegos cooperativos se da un cambio en las relaciones interpersonales de los niños, y de ser así, si el cambio es positivo, es decir, si se trabajan las relaciones desde el aspecto de los valores humanos. Por consiguiente, veremos que los juegos cooperativos sirven y en gran medida para influenciar en ese cambio en las relaciones interpersonales de los niños en un campamento escolar de vela, siendo ese cambio muy positivo y dándose en la mayoría de los niños.

Desarrollo de una herramienta analítica para resolución del problema directo e inverso de un robot serie de 6 grados de libertad.

[ES]En el presente trabajo de fin de grado se expondrá el análisis cinemático de un robot IRB120 de ABB y el desarrollo de una herramienta grafica para su visualización. Comenzando por un estudio del estado del arte de la robótica industrial. El análisis cinemático es plantear las ecuaciones del robot y la resolución del problema directo e inverso mediante el software Matlab. Por último, la herramienta grafica muestra el movimiento del robot y los sistemas de referencia en la trayectoria introducida por el usuario.

"Nortia, te veneror" (CLE 1530 = CIL 6. 537): la defensa de Avieno de la fortuna y del encomio propio

Este trabajo ha sido realizado dentro del Grupo de Investigación GIU 10-19 “LITTERARVM. Grupo de Investigación en Literatura, Retórica y Tradición Clásica” de la UPV/EHU.

Bertsogintzaren erabilera didaktikoa zornotzako larrea eskolaren lehen hezkuntzako 1. Zikloaren 6-7 urteko umeen gela batean

[eus] Proiektu honen bidez, Lehen Hezkuntzako lehenengo zikloan bertsogintza eta koplagintza lantzea posible dela erakutsi nahian, eguneroko errutinetan eta ipuin baten sekuentzializazioan bertsoak eta koplak txertatu ditut. Horretarako, hizkuntza lantzea izan da nire helbururik nagusiena, taldea motibatuz eta bertsoekiko zaletasuna bultzatuz. Ebaluaketa egiterakoan, metodo kualitatiboan oinarritu naiz ikasleen garapenaz ohartzeko. Azkenik, emaitzak eta ondorioak plazaratu ditut.