Chemical recycling of municipal packaging waste by pyrolysis

[EN]The present doctoral thesis centers on studying pyrolysis as a chemical recycling technique for rejected packaging waste fractions coming from separation and sorting plants. The pyrolysis experiments have been carried out in a lab-scale installation equipped with a 3.5 L semi-batch reactor and a condensation and collection system for the liquids and gases generated. In the present thesis, an experimental study on the conventional pyrolysis process applied to the aforementioned waste fractions has been conducted, as well as the study of non-conventional or advanced pyrolysis processes such as catalytic and stepwise pyrolysis. The study of the operating parameters has been carried out using a mixed plastics simulated sample, the composition of which is similar to that found in real fractions, and subsequently the optimized process has been applied to real packaging waste. An exhaustive characterization of the solids, liquids and gases obtained in the process has been made after each experiment and their potential uses have been established. Finally, an empirical model that will predict the pyrolysis yields (% organic liquid, % aqueous liquid, % gases, % char, % inorganic solid) as a function of the composition of the initial sample has been developed. As a result of the experimental work done, the requirements have been established for an industrial packaging waste pyrolysis plant that aims to be sufficiently versatile as to generate useful products regardless of the nature of the raw material.

Aproximación teórica de la lealtad de marca: enfoques y valoraciones

[ES] El concepto de lealtad no es nuevo en el mercadeo, por el contrario ha sido uno de los temas más investigados, sin embargo no se ha llegado a unificar criterios sobre su definición por ser un fenómeno complejo. Inicialmente, el estudio de la lealtad se abordó desde dos corrientes diferentes: como una actitud, donde se dan cabida sentimientos y afectos positivos a favor de una marca; como un comportamiento efectivo, materializado en compras repetidas de la misma marca. Luego, se consideró una corriente que plantea que la medición de la lealtad no concierne exclusivamente a la valoración del comportamiento de recompra o al compromiso, sino a ambos. El objetivo de este artículo es el describir los aspectos más relevantes del concepto de lealtad de marca, a partir de la revisión y análisis teórico, específicamente su definición, enfoques, métodos de medición y tipos, para presentar algunas consideraciones finales.

Structural relaxation and chain dynamics in polymer melts : a computational investigation on the role of the intramolecular barriers

149 p. : il. col.

Design and synthesis of biofunctional magnetic/fluorescent glyco-nanoparticles and quantum dots and their application as specific molecular imaging probes

206 p.

El significado de la creación de tejidos en la obra de mujeres artistas

461 p. : il., col.

Development of catalytic methane reforming systems integrating hydrogen selective PdCu membrane modules

En la presente tesis doctoral se ha estudiado la integración del proceso de producción de hidrógeno con su purificación mediante el empleo de membranas selectivas de hidrógeno. La producción de hidrógeno se realiza empleando catalizadores no convencionales de níquel soportado sobre magnesia y alúmina en un reactor catalítico. Se analiza la actividad de los catalizadores y la producción de hidrógeno mediante distintos procesos con metano como son la oxidación parcial catalítica (OPC), OPC húmeda y reformadoLa purificación de hidrógeno se realiza en un módulo provisto de una membrana selectiva de hidrógeno de PdCu depositado en un soporte poroso cerámico. Una vez optimizada su preparación mediante deposición no electrolítica se caracterizan. Para ello se determina su permeabilidad a distintas temperaturas y realizando ciclos térmicos en atmósferas inerte y de hidrógeno, que puede fragilizar el metal. Una vez preparados los catalizadores y las membranas se integran los dos sistemas y se determinan los parámetros de operación óptimos como la presión de la línea de alimentación y el caudal de gas de arrastre en el módulo de membrana. Ambos parámetros se optimizan para lograr la máxima recuperación de hidrógeno en el módulo de membrana. Por últimos se realizan ensayos completos de producción y purificación, que permiten observar el rendimiento del sistema y también el efecto que los compuestos de la mezcla compleja alimentada a las membranas tienen en su comportamiento. Para concluir la integración de procesos se realizan ensayos añadiendo azufre de forma que el sistema sea más similar al proceso real. Esto permite también analizar el efecto del azufre tanto en los catalizadores como en las membranas.

Charles Darwin y la Descripción de la Naturaleza

Comunicación presentada en el I Congreso de la Asociación Iberoamericana de Filosofía de la Biología (Valencia)

Optimización de la metodología para la producción de hongos comestibles

El cultivo de hongos comestibles saprófitos constituye un sistema de producción-consumo, que ha adquirido gran relevancia social, económica y ecológica. Con el fin de abaratar costes a la vez que aprovechar y reciclar residuos forestales, el objetivo de este trabajo se ha centrado en evaluar la viabilidad del aserrín de Eucalyptus globulus como soporte del cultivo en bolsa de Lentinula edodes (hongo comercializado conocido como Shiitake) y Agrocybe aegerita (hongo no comercializado comúnmente llamado Seta de Chopo). Se han evaluado 6 formulaciones, todas ellas con el aserrín como componente principal y con adición de diferentes suplementos: cereales (salvado y mijo), un controlador del pH (CaCO3) y un estimulador de crecimiento (CaSO4). Se ha determinado el crecimiento miceliar sobre cada uno de los sustratos, así como la producción de carpoforos (tanto en cantidad como en calidad) y la duración del periodo de fructificación. La mezcla más efectiva para la producción de L. edodes fue aquella que contenía yeso y azúcar mientras que para A. aegerita el salvado resultó ser el mejor suplemento.

Producción de hidrógeno por reformado catalítico en fase acuosa de disoluciones de metanol. Catalizador de Platino.

El objetivo que persigue la línea de investigación en la que se engloba este trabajo es la obtención de hidrógeno desde disoluciones acuosas de metanol (aproximadamente del 10% de metanol), considerando estos compuestos como una forma de almacenar hidrógeno y obtenerlo a baja temperatura “on-board” en un vehículo mediante el reformado en fase acuosa. El reto es conseguir un sistema catalítico de pequeño volumen y rápida respuesta a las demandas de hidrógeno con elevado rendimiento y calidad apropiada (<10 ppm de CO) para las pilas de combustible PEM. Los objetivos planteados en el siguiente trabajo se centran en la preparación y caracterización de un catalizador de platino soportado en alúmina, y la puesta en marcha de un reactor discontinuo de mezcla perfecta a presión para la evaluación de catalizadores en el proceso de reformado en fase líquida.

Estudio de los sueros ricos en factores de crecimiento y de su efecto sobre células de epitelio corneal

Objetivos: Estudiar cómo afecta a la concentración de determinados factores de crecimiento presentes en los sueros la filtración (utilizado como método de esterilización) y el tratamiento por calor (utilizado para la inactivación del complemento). Además de estudiar el efecto de un bioadhesivo (ácido hialurónico, HaNa), aplicado solo o conjuntamente con el suero rico en factores de crecimiento (s-PRGF), sobre la capacidad de las células de epitelio corneal (HCE) para proliferar y migrar. Materiales y métodos: Se midió mediante kits ELISA comerciales la concentración en las diferentes condiciones de filtración y calentamiento de las siguientes biomoléculas EGF (Epidermal Growth Factor), VEGF (Vascular Endothelial Growth Factor), HGF (Hepatocyte Growth Factor), PDGF (Platelet-derived Growth Factor) y la Fibronectina. Teniendo en cuenta el papel de la proliferación y migración celular en los procesos de cicatrización se han realizado dos ensayos diferentes in vitro: un ensayo MTT para estudiar la viabilidad y la proliferación celular y el método de la herida (Scratch wound-healing assay) para determinar la capacidad migratoria de células bajo ciertos tratamientos: BSA (Bovine Serum Albumin) al 1% como control, FBS (Fetal Bovine Serum) al 10%, s-PRGF al 45%, s-PRGF al 45% con HaNa 0,1% y HaNa al 0,1% Resultados: En el caso de la filtración, se observa una mayor pérdida de factores utilizando un filtro con una membrana de PVDF (Durapore®) para todos los factores estudiados. El calentamiento produce una reducción de la concentración superior al 50% en el caso del HGF y EGF, manteniéndose constante en el caso del VEGF.La mezcla de diferentes muestras con el complemento inactivado para formar un pool no presenta cambios en la concentración al compararlo con la media de las muestras utilizadas. Por tanto, la utilización de un pool del hemoderivado no supone perdida de factores de crecimiento, haciendo de ello un procedimiento perfectamente aceptable para los ensayos celulares. El tratamiento con s-PRGF y el combinado con el bioadhesivo promueven la proliferación y migración de las células de epitelio corneal humano(HCE) in vitro de manera similar, no encontrándose diferencias estadísticamente significativas entre ambos. Conclusiones: La adicción del bioadhesivo no produce efecto tóxico en las células, sin embargo, no se han encontrado efectos beneficiosos en cuanto a proliferación y migración se refiere. A este respecto, creemos que hay que dar un paso más haciendo comprobaciones in vivo, ya que, a diferencia de la experimentación in vitro los componentes de los hemoderivados no están indefinidamente en contacto con las células sino por un espacio de tiempo muy reducido. Por ello, la concentración de factores de crecimiento en la aplicación in vivo es especialmente importante, y no sería conveniente reducirla mediante procedimientos físicos como la filtración o el calentamiento.

Síntesis de catalizadores orgánicos : síntesis de organocatalizadores quirales basados en la estructura de BINOL

Se define como quiralidad a la propiedad de un objeto de no ser superponible con su imagen especular. Así, cuando una molécula posee dicha propiedad , surgen dos isómeros configuracionales conocidos como enantiómeros . A la mezcla 1:1 de enantiómeros se le llama mezcla racémica o racemato y se caracteriza por no ser ópt icamente activa . Ambos enantiómeros presentes en la mezcla tienen las mismas propiedades físicas y químicas a excepción de su actividad óptica , aunque su comportamiento frente a dianas biológicas puede variar dependiendo del enantiómero

Valoración de bio-oil completo por craqueo catalítico en condiciones de la unidad FCC de refinería

351 p.

IKASNABAR 2014 International Conference. Microcontents, miniMOOCs and mLearning

[ES]Ikasnabar es una conferencia para hablar de tendencias en educación, sobre las nuevas tecnologías en el ámbito educativo y conocer personas que están generando buenas ideas y prácticas en su quehacer diario. Este libro intenta recoger todo ello con las contribuciones de autores noveles y de renombre que buscan la excelencia en los procesos de enseñanza-aprendizaje. Tres tendencias importantes de aprendizaje se están expandiendo. Microcontenidos, aprendizaje móvil y MOOCs son la cara de una misma moneda: microaprendizaje con contenido rico, abierto y desmenuzado. A medida que el consumo de Internet desde dispositivos móviles aumenta, el aprendizaje móvil con tecnologías como HTML5, software para MOOC, plataformas de contenidos de vídeo, etc., están siendo algunas de las claves de la nueva revolución en el ámbito educativo. El microcontenido hace referencia a los pequeños trozos de información digital en un estado permanente de flujo y circulación. Es a menudo un único tema, limitado en longitud, que se consume rápidamente y con frecuencia limitado por el software o por el dispositivo. Se trata de la puesta en común de recursos. Se basa en la interacción humano-a-humano con los medios de comunicación de Internet. El otro tema central de esta conferencia es el de los MOOC realizados por los profesores que quieren tomar ventaja en el comienzo de esta nueva era de la educación abierta con calidad. MOOCs son, básicamente, cursos abiertos y es necesario recordar los puntos esenciales de este tipo de instrucción. Los miniMOOCs son alternativas con menos horas en el proceso de aprendizaje. Hoy en día, un buen MOOC podrá ser la mejor tarjeta de presentación para profesores, expertos y estudiantes. Vivimos en tiempos de cambio con ámbitos en los que se mezcla el aprendizaje formal e informal, y las universidades y colegios deberíamos estar atentos a esto.

Pediatría para la cooperación

La mayor parte de las niñas y niños del planeta nace y muere en lugares carentes de adecuada atención sanitaria, lejos de hospitales y universidades. Hemos querido fusionar el mundo académico, clínico y de la cooperación, sumando ciencia, voluntades e incertidumbres, con la intención de que de esta mezcla pudiera surgir una herramienta útil para quienes se acercan desde el ámbito de la sanidad a la cooperación infantil. Si el recurso más valioso de cada pueblo son las personas y la mayor riqueza es el conocimiento, contribuir a la formación en cuidados sanitarios de la infancia debiera ser la mejor de las inversiones.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.