Estrategias de arranque de biofiltros orgánicos para el tratamiento de corrientes gaseosas contaminadas con compuestos de azufre

[ES]El disulfuro de carbono (CS2) y el sulfuro de hidrógeno (H2S) son gases especialmente tóxicos presentes en una gran cantidad de emisiones gaseosas industriales, principalmente en la producción de fibras de rayón a partir de celulosa en el caso del CS2, y en la industria petroquímica en el caso del H2S. La legislación vigente en cuanto a las emisiones de estos compuestos se refiere hace que su tratamiento sea, en muchos casos, necesario. La biofiltración como tecnología para el tratamiento de corrientes gaseosas contaminadas se ha convertido en los últimos años en una alternativa a los tratamientos físico-químicos empleados hasta la fecha. Sin embargo, uno de los principales obstáculos a la hora de la implantación de este tratamiento biológico a escala industrial es la duración del periodo de aclimatación de la biomasa encargada de degradar los contaminantes, que en función del compuesto a tratar puede resultar demasiado largo para la aplicación comercial de esta tecnología. El presente trabajo se centra en el estudio de estos periodos de arranque y aclimatación, especialmente lentos en el caso del CS2, y propone una estrategia de arranque basada en la reutilización de biomasa capaz de degradar los compuestos de interés, almacenada tras usos anteriores, que permite reducir el tiempo necesario para alcanzar eficacias de eliminación elevadas. Paralelamente, se ha concluido que paradas de corta duración no afectan de manera importante a la operación del sistema.

Reutilización de escoria negra de acería como soporte en biofiltros para la eliminación de H2S del biogás.

[EN]Due to the limitations associated with fossil fuels it is necessary to promote energy sources that are renewable as well as eco-friendly, such as biogas generated in anaerobic digesters. The biogas, composed principally of methane and CO2, is the result of the biodegradation of organic matter under anaerobic conditions. Its use as fuel is limited by the presence of minority compounds such as hydrogen sulphide (H2S); therefore, its pre-treatment is necessary. Currently there are various technologies for the removal of H2S from a gas stream, but most of them are based on physic-chemical treatments which have a number of drawbacks as reactive consumption, generation of secondary flows, etc. Biofiltration has been used as an efficient and low cost alternative to conventional purification processes, and excellent results for the degradation of H2S have been obtained. However process can be limited due to the progressive ageing of the support material, along with the loss of nutrients and other specific characteristics necessary for the good development of biomass. The purpose of this project is to develop a mixed support consisting of a mixture of an organic material and an inorganic support for its application in the removal of the H2S from biogas. This support material helps to optimize the characteristics of the bed and extend its lifespan. The development of such material will contribute to the implementation of biofiltration for treating biogas from anaerobic digesters for its use as biofuel. The inorganic material used is electric arc furnace (EAF) black slag, a by-product generated in large quantities in the production of steel in the Basque Country. Although traditionally the slag has been used in civil engineering, its physicochemical characteristics make it suitable for reuse as a filter medium in biofiltration. The main conclusion drawn from the experimental results is that EAF black slag is a suitable co-packing material in organic biofilters treating H2S-polluted gaseous streams. High pollutant removal rates have been achieved during the whole experimental period. The removal capacity recorded in biofilters with less inorganic material was higher than in those with higher slag portion. Nevertheless, all the biofilters have shown a satisfactory response even at high inlet loads (48 g·m-3·h-1), where the RE has not decreased over 82%.

Monte Carlo Valuation of natural gas investments

This paper deals with the valuation of energy assets related to natural gas. In particular, we evaluate a baseload Natural Gas Combined Cycle (NGCC) power plant and an ancillary instalation, namely a Liquefied Natural Gas (LNG) facility, in a realistic setting; specifically, these investments enjoy a long useful life but require some non-negligible time to build. Then we focus on the valuation of several investment options again in a realistic setting. These include the option to invest in the power plant when there is uncertainty concerning the initial outlay, or the option's time to maturity, or the cost of CO2 emission permits, or when there is a chance to double the plant size in the future. Our model comprises three sources of risk. We consider uncertain gas prices with regard to both the current level and the long-run equilibrium level; the current electricity price is also uncertain. They all are assumed to show mean reversion. The two-factor model for natural gas price is calibrated using data from NYMEX NG futures contracts. Also, we calibrate the one-factor model for electricity price using data from the Spanish wholesale electricity market, respectively. Then we use the estimated parameter values alongside actual physical parameters from a case study to value natural gas plants. Finally, the calibrated parameters are also used in a Monte Carlo simulation framework to evaluate several American-type options to invest in these energy assets. We accomplish this by following the least squares MC approach.

Simulación y automatización del sistema de aceite de una turbina de gas en un almacenamiento de gas natural.

73 p. : il., col.

Households WTP for the Reliability of Gas Supply

26 p.

Cogeneración con gas natural en una empresa de tratamientos térmicos

[ES]Diseño de una instalación de cogeneración basada en un motor de combustible gas natural para una empresa de tratamientos térmicos y superficiales. Para satisfacer las necesidades energéticas de la planta, la potencia eléctrica la suministrará un alternador conectado al motor y, a su vez, la entalpía de los humos de escape del motor se aprovechará para la producción de vapor de agua, necesario para la actividad industrial de la empresa. Por otro lado, el calor que es necesario disipar de dicho motor se recuperará para el calentamiento de agua de red, con la finalidad de limpiar la taladrina de las piezas tratadas.

Turbomáquinas térmicas: 1. Turbomáquinas térmicas. 2. Estudio y diseño de turbinas de gas. 3. Problemas

Contenido: - Instalaciones de turbina de gas. - Análisis de los procesos termodinámicos. - Conceptos básicos para el análisis de turbinas de gas: a) Instalación de turbina de gas. b) Turbina como máquina térmica. - Análisis mediante el software Turgas.

Motores térmicos de vapor, gas y de combustión interna a través de PBL (Project Based Learning)

Nivel educativo: Grado. Duración (en horas): De 31 a 40 horas