Shortcuts to adiabaticity in the double well

123 p.

An Estimated New-Keynesian Model with Unemployment as Excess Supply of Labor

Wage stickiness is incorporated to a New-Keynesian model with variable capital to drive endogenous unemployment uctuations de ned as the log di¤erence between aggregate labor supply and aggregate labor demand. We estimated such model using Bayesian econometric techniques and quarterly U.S. data. The second-moment statistics of the unemployment rate in the model give a good t to those observed in U.S. data. Our results also show that wage-push shocks, demand shifts and monetary policy shocks are the three major determinants of unemployment fl uctuations. Compared to an estimated New-Keynesian model without unemployment (Smets and Wouters, 2007): wage stickiness is higher, labor supply elasticity is lower, the slope of the New-Keynesian Phillips curve is flatter, and the importance of technology innovations on output variability increases.

TWEAK/Fn14 Signaling Is Required for Liver Regeneration after Partial Hepatectomy in Mice

Background & Aims: Pro-inflammatory cytokines are important for liver regeneration after partial hepatectomy (PH). Expression of Fibroblast growth factor-inducible 14 (Fn14), the receptor for TNF-like weak inducer of apoptosis (TWEAK), is induced rapidly after PH and remains elevated throughout the period of peak hepatocyte replication. The role of Fn14 in post-PH liver regeneration is uncertain because Fn14 is expressed by liver progenitors and TWEAK-Fn14 interactions stimulate progenitor growth, but replication of mature hepatocytes is thought to drive liver regeneration after PH. Methods: To clarify the role of TWEAK-Fn14 after PH, we compared post-PH regenerative responses in wild type (WT) mice, Fn14 knockout (KO) mice, TWEAK KO mice, and WT mice treated with anti-TWEAK antibodies. Results: In WT mice, rare Fn14(+) cells localized with other progenitor markers in peri-portal areas before PH. PH rapidly increased proliferation of Fn14(+) cells; hepatocytic cells that expressed Fn14 and other progenitor markers, such as Lgr5, progressively accumulated from 12-8 h post-PH and then declined to baseline by 96 h. When TWEAK/Fn14 signaling was disrupted, progenitor accumulation, induction of pro-regenerative cytokines, hepatocyte and cholangiocyte proliferation, and over-all survival were inhibited, while post-PH liver damage and bilirubin levels were increased. TWEAK stimulated proliferation and increased Lgr5 expression in cultured liver progenitors, but had no effect on either parameter in cultured primary hepatocytes. Conclusions: TWEAK-FN14 signaling is necessary for the healthy adult liver to regenerate normally after acute partial hepatectomy.

Estudio del comportamiento aerodinámico de un alerón trasero de un monoplaza tipo Formula Student

[ES]El proyecto investigador tiene el objeto el estudio del comportamiento de un perfil aerodinámico frente a un flujo turbulento, en este caso el aire. Se trata de evaluar las presiones que se ejercen sobre dicho perfil, que será un alerón de monoplaza tipo Formula Student, para comprobar si aporta alguna mejora en el comportamiento del monoplaza la introducción de este paquete aerodinámico. Con la introducción de este perfil en el monoplaza se pretende ganar un mayor agarre en el paso por curva siendo la resistencia al avance en recta la mínima posible, ya que lo que se pretende es hacer el recorrido del circuito en el menor tiempo posible. Por tanto hay dos variables a tener en cuenta a la hora de diseñar el alerón, por un lado esta mejorar el agarre de los neumáticos sobre el asfalto al tomar una curva, lo que nos permitirá tomar la curva a mayor velocidad y por tanto en menos tiempo, y por otro lado, la oposición que el alerón ejerce en el avance en recta disminuyendo su velocidad máxima. En resumen, se trata de comparar la fuerza horizontal y la fuerza vertical que el aire ejerce sobre el perfil aerodinámico a introducir en el monoplaza y evaluar si es beneficioso para este, es decir, si añadiendo dicho perfil se realiza el trazado del circuito en menor tiempo que sin él. Para ello se realizarán simulaciones con un software de modelado físico de flujos y turbulencias sobre un diseño de un alerón dado, con diferentes tipos de flujo, de forma que se asemeje de mejor forma a las condiciones de la pista y se obtendrán los resultados de las presiones que el flujo de aire ejerce sobre las superficies del perfil. Después se obtendrán las fuerzas puntuales vertical y horizontal y se analizaran los datos obtenidos. Deberán tenerse en cuenta, además de los resultados obtenidos, los materiales a emplear a la hora de su fabricación, el proceso de dicha fabricación y el coste que supone tanto el proceso como los materiales empleados.

Control de un sistema de accionamientos de traslación basado en correa para un manipulador de cinemática paralela

[ES]Este Trabajo de Fin de Grado “Control de un sistema de accionamientos de traslación basado en correa para un manipulador de cinemática paralela” tiene como objetivo principal la implementación de un sistema de control que nos permita manejar un manipulador de cinemática paralela de dos grados de libertad accionado mediante dos motores eléctricos de corriente continua. Como componente central de este sistema de control, se dispondrá de un ordenador portátil cuyo procesador será el encargado de ejecutar las acciones necesarias para que pueda llevarse a cabo esta actividad de control. De esta forma, la tarea más importante y laboriosa a llevar cabo en este proyecto será el desarrollo de un aplicación de control que, corriendo en el citado ordenador, permitirá al usuario manejar el manipulador de cinemática paralela en cuestión. Para ello, esta aplicación deberá ser capaz de interpretar las ordenes de movimiento dadas por el usuario y transmitirlas al procesador del mencionado ordenador. Además de todo lo anterior, para completar el desarrollo del sistema de control, será necesaria la implementación de diversos sensores que se encargarán de detectar y transmitir las señales necesarias para evitar situaciones de emergencia en el que el manipulador estuviese a punto de chocar con algún objeto o persona. En conclusión, mediante el cumplimiento de los objetivos de este Trabajo de Fin de Grado, se va a disponer de un sistema de control sencillo, intuitivo y fácilmente operable, que va a permitir a cualquier futuro usuario del mismo el manejo de un robot de cinemática paralela.

TWEAK/Fn14 Signaling Is Required for Liver Regeneration after Partial Hepatectomy in Mice

Background & Aims: Pro-inflammatory cytokines are important for liver regeneration after partial hepatectomy (PH). Expression of Fibroblast growth factor-inducible 14 (Fn14), the receptor for TNF-like weak inducer of apoptosis (TWEAK), is induced rapidly after PH and remains elevated throughout the period of peak hepatocyte replication. The role of Fn14 in post-PH liver regeneration is uncertain because Fn14 is expressed by liver progenitors and TWEAK-Fn14 interactions stimulate progenitor growth, but replication of mature hepatocytes is thought to drive liver regeneration after PH. Methods: To clarify the role of TWEAK-Fn14 after PH, we compared post-PH regenerative responses in wild type (WT) mice, Fn14 knockout (KO) mice, TWEAK KO mice, and WT mice treated with anti-TWEAK antibodies. Results: In WT mice, rare Fn14(+) cells localized with other progenitor markers in peri-portal areas before PH. PH rapidly increased proliferation of Fn14(+) cells; hepatocytic cells that expressed Fn14 and other progenitor markers, such as Lgr5, progressively accumulated from 12-8 h post-PH and then declined to baseline by 96 h. When TWEAK/Fn14 signaling was disrupted, progenitor accumulation, induction of pro-regenerative cytokines, hepatocyte and cholangiocyte proliferation, and over-all survival were inhibited, while post-PH liver damage and bilirubin levels were increased. TWEAK stimulated proliferation and increased Lgr5 expression in cultured liver progenitors, but had no effect on either parameter in cultured primary hepatocytes. Conclusions: TWEAK-FN14 signaling is necessary for the healthy adult liver to regenerate normally after acute partial hepatectomy.

Biochemical biomarkers in samples processed by different methods in Environmental Specimen Banks

In the last decades the creation of new Environmental Specimen Banks (ESB) is increasing due to the necessity of knowing the effects of pollutants in both the environment and human populations. ESBs analyze and store samples in order to understand the effects of chemicals, emerging substances and the environmental changes in biota. For a correct analysis of the effect induced by these variables, there is a need to add biological endpoints, such as biomarkers, to the endpoints based on chemical approaches which have being used until now. It is essential to adapt ESB´s sampling strategies in order to enable scientists to apply new biological methods. The present study was performed to obtain biochemical endpoints from samples stored in the BBEBB (Biscay Bay Environmental Biospecimen Bank) of the Marine Station of Plentzia (PIE - UPV/EHU). The main objective of the present work was to study the variability caused in biochemical biomarkers by different processing methods in mussels (Mytilus galloprovincialis) from two localities (Plentzia and Arriluze) with different pollution history. It can be concluded that the selected biomarkers (glutathione S-transferase and acetylcholinesterase) can be accurately measured in samples stored for years in the ESBs. The results also allowed the discrimination of both sampling sites. However, in a further step, the threshold levels and baseline values should be characterized for a correct interpretation of the results in relation to the assessment of the ecosystem health status.