The Slow Search for Solutions: Lessons from Historical Energy Transitions by Sector and Service

28 p.

The Green Paradox and Learning-by-doing in the Renewable Energy Sector

21 p.

Lessons from History for Transitions to a Low Carbon Economy

4 p.

Análisis del comportamiento de diferentes tecnologías de aerogeneradores ante ráfagas de viento y huecos de tensión

[ES]Ante el desarrollo que está experimentando la energía eólica en la actualidad, suponiendo un porcentaje cada vez más elevado de la totalidad de la potencia instalada, la adecuación de los requisitos técnicos que ha de cumplir esta tecnología para minimizar su impacto sobre la red eléctrica se ha convertido en una prioridad. Para aprovechar al máximo los beneficios medioambientales que presenta el aprovechamiento del viento como fuente de energía, se deben estudiar alternativas para mejorar su comportamiento ante ráfagas de viento y huecos de tensión. En este documento se incluye una breve explicación del funcionamiento de las tres diferentes tecnologías de aerogeneradores, así como los problemas que derivan de la aparición de huecos de tensión y el comportamiento que presentan ante variaciones en la velocidad de viento. Se comprueba, a su vez, el modo de operación y la eficacia de las posibles soluciones que existen en la actualidad para minimizar el impacto que los inconvenientes de la energía eólica tienen sobre la red y la calidad del suministro eléctrico mediante la realización de simulaciones.

Análisis de las diferentes tecnologías de centrales termosolares.

[ES]En este proyecto se recoge un análisis de las diferentes tecnologías de centrales termosolares. Las energías renovables tienen un papel fundamental en el abastecimiento energético futuro, ya que son una fuente inagotable con un impacto medioambiental mínimo. Dentro de las renovables, la energía termosolar es una de las más destacables en España, que se ha situado como el país líder en termosolar. Existen cuatro tecnologías diferentes para este tipo de centrales, por lo que el objetivo de este trabajo es profundizar en su conocimiento y proporcionar un criterio objetivo que permita seleccionar la más adecuada en futuras instalaciones. Para ello, se considerarán tanto aspectos técnicos como económicos, con el fin de estudiar las principales ventajas y desventajas de cada tipo.

Gasificación de biomasa con astillas de madera.

[ES]Este proyecto tiene como objetivo generar energía eléctrica y térmica para un conjunto de viviendas aisladas, sin acceso a la red eléctrica, con una potencia requerida de 12KW. Se pretende plantear una solución que satisfaga las necesidades básicas de auto-abastecimiento de una forma económicamente rentable. Para comenzar, por un lado de cara al objetivo 20/20/20 se realizará un acercamiento a la utilización de las energías renovables como fuente de energía, disminuyendo así el impacto ambiental. Por otro lado, se plantearán diferentes alternativas para la generación de energía eléctrica y térmica, finalmente haciendo hincapié en el estudio de una planta de gasificación de biomasa mediante astillas de madera. De modo que, a lo largo de este documento se analizarán los principios y fundamentos necesarios para el diseño de una planta de generación eléctrica mediante gasificación de biomasa. Para ello se estudiarán los diferentes modelos de gasificadores existentes, el desarrollo del proceso de gasificación con sus respectivas etapas y la limpieza y adaptación del gas obtenido antes de introducirlo en el MACI. Se realizará una descripción de la planta junto al dimensionamiento tanto del almacenamiento de la materia prima como el de los equipos a instalar. Finalmente, para valorar si se trata de un proyecto viable. Se realizará el estudio económico analizando el presupuesto y análisis de rentabilidad. Asimismo, se plantearán los diferentes riesgos a los que puede exponerse una instalación como esta.

Aporte adicional de energía renovable geotérmica a instalación con cogeneración en hospital existente.

[ES]Este proyecto tiene como objetivo apoyar a la generación de energía por cogeneración mediante una fuente de energía renovable. Se pretende plantear una solución que satisfaga parte de las necesidades básicas del Hospital Universitario de Álava, en su sede del Hospital de Santiago, de una forma económicamente rentable. Este proyecto se enmarca dentro de los esfuerzos en la promoción de energías renovables que comenzaron con el protocolo Kioto, al que le siguieron los objetivos Europa 20/20/20. Se realizará un acercamiento a la utilización de la energía renovable geotérmica como fuente de energía que disminuye el impacto ambiental. El edificio hospitalario considerado ya cuenta con un sistema de generación energética con cogeneración, considerada dentro del régimen especial, por la utilización de energía residual para procesos que de otra manera hubieran requerido consumo de combustible. Se plantearán diferentes alternativas para la generación de energía térmica con geotermia, que al ser de origen renovable, es una fuente de energía de combustibles no fósiles, y se demostraran sus beneficios analizando cómo mejora la huella de carbono del hospital con la propuesta. Finalmente, para valorar si se trata de un proyecto viable se planteará el estudio económico analizando el presupuesto y análisis de rentabilidad.

Optimal Investment in Energy Efficiency under Uncertainty

41 p.

Regulation of Energy Metabolism by the Extracytoplasmic Function (ECF) σ Factors of Arcobacter butzleri

11 p.

An austerity-driven energy reform

In July 2013, the government approved a major overhaul of the Spanish electricity sector to correct existing imbalances that have led to an exponential increase of regulated electricity costs and a huge tariff deficit. The reform addresses the problem of financial sustainability of the sector, severely affected by weak demand and overcapacity. Previous regulation introduced in 2012 and early 2013, also aimed at restoring financial stability of the sector, failed to correct the tariff shortfall and new regulatory measures were needed to reduce the 4.5 billion euros forecasted deficit for 2013. The frequent change of the rules of the game in the sector has created regulatory uncertainty, more so as it is not clear that the present reform will be sufficient to eliminate the deficit. Moreover, the government has left the door open to new regulation that would deal with the price formation system. In general, short run financial criteria have prevailed, while efficiency principles and a long run perspective have little weight in the reform.

The Sustainability of `Sustainable´ Energy Use: Historical Evidence on the Relationship between Economic Growth and Renewable Energy

20 p.

Energy Supply and the Sustainability of Endogenous Growth

29 p.

Valuation of wind energy projects: A real options approach

27 p.

Ab initio study of anharmonicity in high pressure Cmca-4 metallic hydrogen

Hydrogen is the only atom for which the Schr odinger equation is solvable. Consisting only of a proton and an electron, hydrogen is the lightest element and, nevertheless, is far from being simple. Under ambient conditions, it forms diatomic molecules H2 in gas phase, but di erent temperature and pressures lead to a complex phase diagram, which is not completely known yet. Solid hydrogen was rst documented in 1899 [1] and was found to be isolating. At higher pressures, however, hydrogen can be metallized. In 1935 Wigner and Huntington predicted that the metallization pressure would be 25 GPa [2], where molecules would disociate to form a monoatomic metal, as alkali metals that lie below hydrogen in the periodic table. The prediction of the metallization pressure turned out to be wrong: metallic hydrogen has not been found yet, even under a pressure as high as 320 GPa. Nevertheless, extrapolations based on optical measurements suggest that a metallic phase may be attained at 450 GPa [3]. The interest of material scientist in metallic hydrogen can be attributed, at least to a great extent, to Ashcroft, who in 1968 suggested that such a system could be a hightemperature superconductor [4]. The temperature at which this material would exhibit a transition from a superconducting to a non-superconducting state (Tc) was estimated to be around room temperature. The implications of such a statement are very interesting in the eld of astrophysics: in planets that contain a big quantity of hydrogen and whose temperature is below Tc, superconducting hydrogen may be found, specially at the center, where the gravitational pressure is high. This might be the case of Jupiter, whose proportion of hydrogen is about 90%. There are also speculations suggesting that the high magnetic eld of Jupiter is due to persistent currents related to the superconducting phase [5]. Metallization and superconductivity of hydrogen has puzzled scientists for decades, and the community is trying to answer several questions. For instance, what is the structure of hydrogen at very high pressures? Or a more general one: what is the maximum Tc a phonon-mediated superconductor can have [6]? A great experimental e ort has been carried out pursuing metallic hydrogen and trying to answer the questions above; however, the characterization of solid phases of hydrogen is a hard task. Achieving the high pressures needed to get the sought phases requires advanced technologies. Diamond anvil cells (DAC) are commonly used devices. These devices consist of two diamonds with a tip of small area; for this reason, when a force is applied, the pressure exerted is very big. This pressure is uniaxial, but it can be turned into hydrostatic pressure using transmitting media. Nowadays, this method makes it possible to reach pressures higher than 300 GPa, but even at this pressure hydrogen does not show metallic properties. A recently developed technique that is an improvement of DAC can reach pressures as high as 600 GPa [7], so it is a promising step forward in high pressure physics. Another drawback is that the electronic density of the structures is so low that X-ray di raction patterns have low resolution. For these reasons, ab initio studies are an important source of knowledge in this eld, within their limitations. When treating hydrogen, there are many subtleties in the calculations: as the atoms are so light, the ions forming the crystalline lattice have signi cant displacements even when temperatures are very low, and even at T=0 K, due to Heisenberg's uncertainty principle. Thus, the energy corresponding to this zero-point (ZP) motion is signi cant and has to be included in an accurate determination of the most stable phase. This has been done including ZP vibrational energies within the harmonic approximation for a range of pressures and at T=0 K, giving rise to a series of structures that are stable in their respective pressure ranges [8]. Very recently, a treatment of the phases of hydrogen that includes anharmonicity in ZP energies has suggested that relative stability of the phases may change with respect to the calculations within the harmonic approximation [9]. Many of the proposed structures for solid hydrogen have been investigated. Particularly, the Cmca-4 structure, which was found to be the stable one from 385-490 GPa [8], is metallic. Calculations for this structure, within the harmonic approximation for the ionic motion, predict a Tc up to 242 K at 450 GPa [10]. Nonetheless, due to the big ionic displacements, the harmonic approximation may not su ce to describe correctly the system. The aim of this work is to apply a recently developed method to treat anharmonicity, the stochastic self-consistent harmonic approximation (SSCHA) [11], to Cmca-4 metallic hydrogen. This way, we will be able to study the e ects of anharmonicity in the phonon spectrum and to try to understand the changes it may provoque in the value of Tc. The work is structured as follows. First we present the theoretical basis of the calculations: Density Functional Theory (DFT) for the electronic calculations, phonons in the harmonic approximation and the SSCHA. Then we apply these methods to Cmca-4 hydrogen and we discuss the results obtained. In the last chapter we draw some conclusions and propose possible future work.

On the Dynamics of the Adenylate Energy System: Homeorhesis vs Homeostasis

Biochemical energy is the fundamental element that maintains both the adequate turnover of the biomolecular structures and the functional metabolic viability of unicellular organisms. The levels of ATP, ADP and AMP reflect roughly the energetic status of the cell, and a precise ratio relating them was proposed by Atkinson as the adenylate energy charge (AEC). Under growth-phase conditions, cells maintain the AEC within narrow physiological values, despite extremely large fluctuations in the adenine nucleotides concentration. Intensive experimental studies have shown that these AEC values are preserved in a wide variety of organisms, both eukaryotes and prokaryotes. Here, to understand some of the functional elements involved in the cellular energy status, we present a computational model conformed by some key essential parts of the adenylate energy system. Specifically, we have considered (I) the main synthesis process of ATP from ADP, (II) the main catalyzed phosphotransfer reaction for interconversion of ATP, ADP and AMP, (III) the enzymatic hydrolysis of ATP yielding ADP, and (IV) the enzymatic hydrolysis of ATP providing AMP. This leads to a dynamic metabolic model (with the form of a delayed differential system) in which the enzymatic rate equations and all the physiological kinetic parameters have been explicitly considered and experimentally tested in vitro. Our central hypothesis is that cells are characterized by changing energy dynamics (homeorhesis). The results show that the AEC presents stable transitions between steady states and periodic oscillations and, in agreement with experimental data these oscillations range within the narrow AEC window. Furthermore, the model shows sustained oscillations in the Gibbs free energy and in the total nucleotide pool. The present study provides a step forward towards the understanding of the fundamental principles and quantitative laws governing the adenylate energy system, which is a fundamental element for unveiling the dynamics of cellular life.