Tracking the attenuation and nonbreaking dissipation of swells using altimeters

A method for systematically tracking swells across oceanic basins is developed by taking advantage of high-quality data from space-borne altimeters and wave model output. The evolution of swells is observed over large distances based on 202 swell events with periods ranging from 12 to 18 s. An empirical attenuation rate of swell energy of about 4 × 10−7 m−1 is estimated using these observations, and the nonbreaking energy dissipation rates of swells far away from their generating areas are also estimated using a point source model. The resulting acceptance range of nonbreaking dissipation rates is −2.5 to 5.0 × 10−7 m−1, which corresponds to a dissipation e-folding scales of at least 2000 km for steep swells, to almost infinite for small-amplitude swells. These resulting rates are consistent with previous studies using in-situ and synthetic aperture radar (SAR) observations. The frequency dispersion and angular spreading effects during swell propagation are discussed by comparing the results with other studies, demonstrating that they are the two dominant processes for swell height attenuation, especially in the near field. The resulting dissipation rates from these observations can be used as a reference for ocean engineering and wave modeling, and for related studies such as air-sea and wind-wave-turbulence interactions.

Corrosion of stainless steel components in seawater reverse osmosis desalination plants-investigations on adapted internal cathodic protection

Stainless steel is widely used in seawater reverse osmosis units (SWRO) for both good mechanical and corrosion resistance properties. However, many corrosion failures of stainless steel in SWRO desalination units have been reported. These failures may often be attributed to un-adapted stainless steel grade selection and/or to the particular aggressive seawater conditions in "warm" regions (high ambient temperature, severe biofouling, etc.). Cathodic protection (CP) is a well-known efficient system to prevent corrosion of metallic materials in seawater. It is successfully used in the oil and gas industry to protect carbon steel structures exposed in open-sea. However, the specific service conditions of SWRO units may seriously affect the efficiency of such anti-corrosion system (high flow rates, large stainless steel surfaces affected by biofouling, confinement limiting protective cathodic current flow, etc.). Hence, CP in SWRO units should be considered with special care and modeling appears as useful tool to assess an appropriate CP design. However, there is a clear lack of CP data that could be transposed to SWRO service conditions (i.e. stainless steel, effect of biofouling, high flow rate, etc.). From this background a Join Industry Program was initiated including laboratory exposures, field measurements in a full scale SWRO desalination plant, and modeling work using PROCOR software. The present paper reviews the main parameters affecting corrosion of stainless steel alloys in seawater reverse osmosis units. CP on specific stainless steel devices was investigated in order to assess its actual efficiency for SWRO units. Severe environmental conditions were intentionally used to promote corrosion on the tested stainless steel products in order to evaluate the efficiency of CP. The study includes a modeling work aiming at predicting and designing adapted CP protection to modeled stainless steel units. An excellent correlation between modeling work and field measurements was found.

Report of the Working Group for the Bay of Biscay and the Iberian waters Ecoregion (WGBIE). 13-19 May 2016, ICES HQ, Copenhagen, Denmark

The ICES Working Group for the Bay of Biscay and the Iberic waters Ecoregion (WGBIE) met in Copenhagen, Denmark during 13–14 May 2016. There were 22 stocks in its remit distributed from ICES Divisions 3.a–4.a though mostly distributed in Sub Areas 7, 8 and 9. There were 21 participants, some of whom joined the meeting re-motely. The group was tasked with conducting assessments of stock status for 22 stocks using analytical, forecast methods or trends indicators to provide catch forecasts for eight stocks and provide a first draft of the ICES advice for 2016 for fourteen stocks. For the remaining stocks, the group had to update catch information and indices of abundance where needed. Depending on the result of this update, namely if it would change the perception of the stock, the working group drafted new advice. Analytical assessments using age-structured models were conducted for the northern and southern stocks of megrim and the Bay of Biscay sole. The two hake stocks and one southern stock of anglerfish were assessed using models that allow the use of only length-structured data (no age data). A surplus-production model, without age or length structure, was used to assess the second southern stocks of anglerfish. No ana-lytical assessments have been provided for the northern stocks of anglerfish after 2006. This is mostly due to ageing problems and to an increase in discards in recent years, for which there is no reliable data at the stock level. The state of stocks for which no analytical assessment could be performed was inferred from examination of commer-cial LPUE or CPUE data and from survey information. Three nephrops stocks from the Bay of Biscay and the Iberian waters are scheduled for benchmark assessments in October 2016. The WGBIE meeting spent some time review-ing the progress towards the benchmark (see Annex 6) together with longer term benchmarks (2017 and after, see section 1.) for sea bass in the Bay of Biscay, all an-glerfish and hake stocks assessed by the WG. For the northern megrim stock, the sched-ule an inter-benchmark meeting was completed successfully and the group reviewed the outcome and accepted the category 1 update assessment. A recurrent issue significantly constrained the group’s ability to address the terms of reference this year. Despite an ICES data call with a deadline of six weeks before the meeting, data for several stocks were resubmitted during the meeting which lead to increased workloads during the working group, as in that case, the assessments could not be carried out in National Laboratories prior to the meeting as mentioned in the ToRs. This is an important matter of concerns for the group members. Section 1 of the report presents a summary by stock and discusses general issues. Sec-tion 2 provides descriptions of the relevant fishing fleets and surveys used in the as-sessment of the stocks. Sections 3–18 contains the single stock assessments.