Faisabilité biologique de la production de larves d'huîtres creuses Crassostrea gigas à partir d'eau de mer du site de Leucate. Convention de recherche Ifremer/Région Languedoc-Roussillon - Rapport final.

Afin de vérifier sur un site régional la présence d'une qualité d'eau de mer permettant la réalisation d'élevages larvaires d'huîtres creuses Crassostrea gigas (et/ou d'huîtres plates Ostrea edulis) sur une base régulière tout au long de l'année, une série d'élevages comparatifs a été réalisée à la Station IFREMER de Palavas, de mars 1995 à septembre 1995. Le matériel biologique nécessaire à cette comparaison est constitué de larves d'huîtres creuses Crassostrea gigas et en algues unicellulaires provenant de l'éc1oserie commerciale de la SATMAR. Les résultats obtenus démontrent la capacité de l'eau de mer du site étudié sur Leucate à supporter la production de larves d'huîtres creuses compétentes à se métamorphoser et à se fixer. Cette étude s'inscrit dans la démarche de la Région Languedoc-Roussillon et du CEPRALMAR visant à favoriser l'implantation d'une écloserie de production de Mollusques Bivalves sur le littoral méditerranéen.

L'amélioration de la qualité des huîtres à échelle professionnelle: intégration de l'eau salée souterraine traitée comme milieu d'élevage

Les travaux menés au LCPL depuis plusieurs année sur l'engraissement contrôlé de l'huître creuse Crassostrea gigas ont permis, à l'échelle expérimentale de définir les différents paramètres d'élevage: Température: 14°C ration alimentaire: 2.109 cell/ind/j de la diatomée Skeletonema costatum indice AFNOR initial sans incidence débit d'eau: 3 lIind/h eau de mer ou eau salée souterraine Dans ces conditions et après 30 jours d'engraissement, le poids total des huîtres a progressé de 10%, le poids sec de 230%, l'indice AFNOR de 80% et la concentration en glycogène de 450%. Le travail réalisé ici a pour but de transposer de l'échelle expérimentale à une échelle significative pour les professionnels, la technique d'engraissement contrôlé en utilisant l'eau salée souterraine pour la production de phytoplancton d'une part et comme vecteur de régulation thermique d'autre part. En effet, un des intérêts de l'utilisation de l'eau salée souterraine réside dans sa température constante de 14°C permettant un engraissement des huîtres en toute saison sans risque de déclenchement de la gamétogenèse. Afin de vérifier cette possibilité, l'étude a été réalisée au cours de deux saisons: printemps et automne. Pour l'eassai automnal, trois bassins de 8 m2 ont été utilisés, alimentés respectivement en eau de mer naturelle, eau de mer régulé en température par échange thermique avec de l'eau salée souterraine et eau salée souterraine traitée. Dans chaque bassin, 330 kg d'huîtres ont été disposées en 7 ruches de 4 clayettes. Pour l'essai printanier, seuls deux bassins ont été utilisés, alimentés en eau de mer thermorégulée à deux débits différents: 0.61/h et 3 lIh. L'étude a été conduite pour chaque saison sur une période de 35 jours. En automne 2000, l'indice de qualité de chair de 8.2 initialement, a atteint 12.5 en eau salée souterraine, 13.8 en eau de mer thermorégulée et 14.2 en eau de mer naturelle. Le poids de chair sèche passe de 0.9 g initialement à respectivement 2.32g, 2.39g et 2.37g. Les dosages de Pb, Cd, Hg, Mn et As ne montent pas d'évolution entre le début et la fin de l'élevage, par contre le Fe augmente sensiblement dans les huîtres sur eau salée souterraine traitée. En fin d'élevage, une période de stockage de 4 semaines des huîtres sans nourriture, n'a pas montré de perte de qualité. Au printemps 2001, un deuxième essai sera conduit pour vérifier les résultats obtenus à l'automne 2000, confirmer le choix du milieu d'élevage et proposer les éléments permettant d'approcher les coûts de production.

Relations entre apports terrigènes et conchyliculture dans les Pertuis Charentais

This work presents interactions between quantitative and qualitative river freshwater inputs and the shellfish farming (oyster and mussel) in the Pertuis Charentais. The quantity of freshwater (i.e. salinity) seems to have a weak influence on the shellfish farming contrarily to its quality determined by particulate and dissolved matters contained in the water. In autumn and winter, large precipitations have a "globally positive" effect amending the coastal ecosystem. Associated dissolved nutriments and the organic matter largely determine the quality of the coming spring growth for bred shellfish, itself controlling in turn the annual yield efficiencies. However, in winter their effects are postponed because of strong mineral load, low luminosity and temperature, then limiting the primary production. The spring contributions, directly linked to territorial practices, agriculture and tourism are more variable in quantity and quality from one year to another. They often correspond to high-risk inflows since numerous substances from anthropogenic watersheds can be found diluted in the coastal zone as in the Pertuis Charentais. Their impacts on in situ estuarine ecosystems are still poorly known since these substances are mainly studied and estimated in laboratory in controlled conditions. Several studies showed anthropogenic contaminations (i.e. cadmium, pesticides) could have significant direct or indirect effects on shellfish farming. For instance, the "summer" mortalities between 1990 and 2000 in the South of the Marennes-Oléron bay (MOB), that induced environmental and physiological oyster disorders, could be linked to pesticide effects, measured during consecutive years on the oyster bed of Ronce Perquis in the South of the MOB. The weak results from the spring larval rearing of the IFREMER experimental hatchery in the South of the bay, and chromosomal abnormalities measured on the stocks of wild oysters of the Pertuis could confirm a high-risk spring environment for the shellfish farming. In summer terrestrial inputs are reduced by low precipitations, anthropogenic water removals (drinking water, irrigation) and by plant evapotranspiration. Consequently certain years, a significant salinity increase in water masses of the Pertuis Charentais is observed. However, based on long-term observations, the significant interannual variability noticed in freshwater contributions constitutes one of the most important facts of these last years. When contributions are weak (i.e. 1991 and 2011), the mean annual salinity is 34.5 in the MOB. To the contrary, other years (i.e. 1977, 1981, 1983 and 1988), the mean salinity reduced to 30.5 shows the significant freshwater contributions to the bay. Elsewhere, particularly in the mediterranean region, oyster breeding water conditions characterized by high salinity values show the freshwater does not seem to be necessary for biological functions of the Pacific oyster Crassostrea gigas. Indeed, the oyster embryonic life in particular is well adapted to high salinity values as long as trophic resources are substantial and temperatures remain high. These two factors firstly condition the embryonic survival before the water salinity. Besides, in the Pertuis Charentais, wind conditions and the geographical bloodstock position rather determine the success of the larvae capture than seawater physic-chemical conditions. Finally, a misunderstanding still remains on summer freshwater contributions to the oyster larvae food supply.

Caractérisation du fonctionnement d'une hydrolienne à membrane ondulante pour la récupération de l'énergie des courants marins

This manuscript presents three approaches : analytical, experimental and numerical, to study the behaviour of a flexible membrane tidal energy converter. This technology, developed by the EEL Energy company, is based on periodic deformations of a pre-stressed flexible structure. Energy converters, located on each side of the device, are set into motion by the wave-like motion. In the analytical model, the membrane is represented by a linear beam model at one dimension and the flow by a 3 dimensions potential fluid. The fluid forces are evaluated by the elongated body theory. Energy is dissipated all over the length of the membrane. A 20th scale experimental prototype has been designed with micro-dampers to simulate the power take-off. Trials have allowed to validate the undulating membrane energy converter concept. A numerical model has been developed. Each element of the device is represented and the energy dissipation is done by dampers element with a damping law linear to damper velocity. Comparison of the three approaches validates their ability to represent the membrane behaviour without damping. The energy dissipation applied with the analytical model is clearly different from the two other models because of the location (where the energy is dissipated) and damping law. The two others show a similar behaviour and the same order of power take off repartition but value of power take off are underestimated by the numerical model. This three approaches have allowed to put forward key-parameters on which depend the behaviour of the membrane and the parametric study highlights the complementarity and the advantage of developing three approaches in parallel to answer industrial optimization problems. To make the link between trials in flume tank and sea trials, a 1/6th prototype has been built. To do so, the change of scale was studied. The behaviour of both prototypes is compared and differences could be explained by differences of boundary conditions and confinement effects. To evaluated membrane long-term behaviour at sea, a method of ageing accelerated by temperature and fatigue tests have been carried out on prototype materials samples submerged in sea water.

De nouvelles voies d’inhibition des biofilms. Des micro-organismes producteurs de nouvelles molécules actives

Lors d’une immersion en eau de mer, tous les matériaux et structures sont rapidement colonisés par des salissures d’origine biologique : des biofilms. La transformation des propriétés de surface dumatériau et la présence demicro- oumacro-organismes (bactéries, algues, balanes, larves) engendrent des risques accrus de corrosion localisée, la biodétérioration desmatériaux immergés, le blocage des fonctions mécaniques…Afin de contrôler le dépôt et le développement de ces biofilms, la méthode privilégiée est l’application de peintures anti-salissures. Cependant ces revêtements sont généralement toxiques pour l’environnement. C’est pourquoi, les travaux menés actuellement visent à isoler de nouvelles molécules, produites par les bactéries marines, dans le but de développer des moyens de luttes écologiques et non toxiques contre les biofilms indésirables.

Résultats de la mise en oeuvre des réseaux REPHY et SRN – Zones côtières de la Manche orientale et de la baie sud de la Mer du Nord – Bilan de l’année 2015

The coastal zone of the Nord – Pas de Calais / Picardie showed dysfonctioning patterns of the ecosystem considered to be link to human activities along shores. These results in regular massive development of species, such as the phytoplanktonic seaweed, Phaeocystis sp. which life cycle was partly linked to nutrients availability and consequently to anthropogenic inputs. As part of the evaluation of the influence of continental inputs on the marine environment (nitrates, phosphates,…) and on potential eutrophication processes, of the estimation of the efficiency of the sewage treatments plants in the possible elimination of dumpings and in order to establish a long-term survey to follow up the change in coastal waters quality, the regional nutrients monitoring network was implemented by Ifremer in collaboration with the Agence de l'Eau Artois-Picardie in 1992 in order to complete the REPHY (Phytoplankton and Phycotoxins) monitoring programme. This study reports the main results for the year 2015 in terms of temporal change of the main physico-chemical and biological parameters characteristic of water masses sampled along three transects offshore Dunkerque, Boulogne-sur-Mer and the Bay of Somme.

CATARINA 2012-Leg 1 - CTD-O2 Data report

The CATARINA Leg1 cruise was carried out from June 22 to July 24 2012 on board the B/O Sarmiento de Gamboa, under the scientific supervision of Aida Rios (CSIC-IIM). It included the occurrence of the OVIDE hydrological section that was performed in June 2002, 2004, 2006, 2008 and 2010, as part of the CLIVAR program (name A25) ), and under the supervision of Herlé Mercier (CNRSLPO). This section begins near Lisbon (Portugal), runs through the West European Basin and the Iceland Basin, crosses the Reykjanes Ridge (300 miles north of Charlie-Gibbs Fracture Zone, and ends at Cape Hoppe (southeast tip of Greenland). The objective of this repeated hydrological section is to monitor the variability of water mass properties and main current transports in the basin, complementing the international observation array relevant for climate studies. In addition, the Labrador Sea was partly sampled (stations 101-108) between Greenland and Newfoundland, but heavy weather conditions prevented the achievement of the section south of 53°40’N. The quality of CTD data is essential to reach the first objective of the CATARINA project, i.e. to quantify the Meridional Overturning Circulation and water mass ventilation changes and their effect on the changes in the anthropogenic carbon ocean uptake and storage capacity. The CATARINA project was mainly funded by the Spanish Ministry of Sciences and Innovation and co-funded by the Fondo Europeo de Desarrollo Regional. The hydrological OVIDE section includes 95 surface-bottom stations from coast to coast, collecting profiles of temperature, salinity, oxygen and currents, spaced by 2 to 25 Nm depending on the steepness of the topography. The position of the stations closely follows that of OVIDE 2002. In addition, 8 stations were carried out in the Labrador Sea. From the 24 bottles closed at various depth at each stations, samples of sea water are used for salinity and oxygen calibration, and for measurements of biogeochemical components that are not reported here. The data were acquired with a Seabird CTD (SBE911+) and an SBE43 for the dissolved oxygen, belonging to the Spanish UTM group. The software SBE data processing was used after decoding and cleaning the raw data. Then, the LPO matlab toolbox was used to calibrate and bin the data as it was done for the previous OVIDE cruises, using on the one hand pre and post-cruise calibration results for the pressure and temperature sensors (done at Ifremer) and on the other hand the water samples of the 24 bottles of the rosette at each station for the salinity and dissolved oxygen data. A final accuracy of 0.002°C, 0.002 psu and 0.04 ml/l (2.3 umol/kg) was obtained on final profiles of temperature, salinity and dissolved oxygen, compatible with international requirements issued from the WOCE program.