Corrosion of stainless steel components in seawater reverse osmosis desalination plants-investigations on adapted internal cathodic protection

Stainless steel is widely used in seawater reverse osmosis units (SWRO) for both good mechanical and corrosion resistance properties. However, many corrosion failures of stainless steel in SWRO desalination units have been reported. These failures may often be attributed to un-adapted stainless steel grade selection and/or to the particular aggressive seawater conditions in "warm" regions (high ambient temperature, severe biofouling, etc.). Cathodic protection (CP) is a well-known efficient system to prevent corrosion of metallic materials in seawater. It is successfully used in the oil and gas industry to protect carbon steel structures exposed in open-sea. However, the specific service conditions of SWRO units may seriously affect the efficiency of such anti-corrosion system (high flow rates, large stainless steel surfaces affected by biofouling, confinement limiting protective cathodic current flow, etc.). Hence, CP in SWRO units should be considered with special care and modeling appears as useful tool to assess an appropriate CP design. However, there is a clear lack of CP data that could be transposed to SWRO service conditions (i.e. stainless steel, effect of biofouling, high flow rate, etc.). From this background a Join Industry Program was initiated including laboratory exposures, field measurements in a full scale SWRO desalination plant, and modeling work using PROCOR software. The present paper reviews the main parameters affecting corrosion of stainless steel alloys in seawater reverse osmosis units. CP on specific stainless steel devices was investigated in order to assess its actual efficiency for SWRO units. Severe environmental conditions were intentionally used to promote corrosion on the tested stainless steel products in order to evaluate the efficiency of CP. The study includes a modeling work aiming at predicting and designing adapted CP protection to modeled stainless steel units. An excellent correlation between modeling work and field measurements was found.

Determination of thresholds in marine molluscs as an alternative to the Environmental Quality Standards in marine water defined in the Water Framework Directive

The Water Framework Directive (WFD) establishes Environmental Quality Standards (EQS) in marine water for 34 priority substances. Among these substances, 25 are hydrophobic and bioaccumulable (2 metals and 23 organic compounds). For these 25 substances, monitoring in water matrix is not appropriate and an alternative matrix should be developed. Bivalve mollusks, particularly mussels (Mytilus edulis, Mytilus galloprovincialis), are used by Ifremer as a quantitative biological indicator since 1979 in France, to assess the marine water quality. This study has been carried out in order to determine thresholds in mussels at least as protective as EQS in marine water laid down by the WFD. Three steps are defined: - Provide an overview of knowledges about the relations between the concentrations of contaminants in the marine water and mussels through bioaccumulation factor (BAF) and bioconcentration factor (BCF). This allows to examine how a BCF or a BAF can be determined: BCF can be determined experimentally (according to US EPA or ASTM standards), or by Quantitative Activity-Structure Relationship models (QSAR): four equations can be used for mussels. BAF can be determined by field experiment; but none standards exists. It could be determined by using QSAR but this method is considered as invalid for mussels, or by using existing model: Dynamic Budget Model, but this is complex to use. - Collect concentrations data in marine water (Cwater) in bibliography for those 25 substances; and compare them with concentration in mussels (Cmussels) obtained through French monitoring network of chemicals contaminants (ROCCH) and biological integrator network RINBIO. According to available data, this leads to determine the BAF or the BCF (Cmussels /Cwater) with field data. - Compare BAF and BCF values (when available) obtained with various methods for these substances: BCF (stemming from the bibliography, using experimental process), BCF calculated by QSAR and BAF determined using field data. This study points out that experimental BCF data are available for 3 substances (Chlorpyrifos, HCH, Pentachlorobenzene). BCF by QSAR can be calculated for 20 substances. The use of field data allows to evaluate 4 BAF for organic compounds and 2 BAF for metals. Using these BAF or BCF value, thresholds in shellfish can be determined as an alternative to EQS in marine water.

Directive Cadre sur l’Eau : les pressions anthropiques et leur impact sur les indicateurs de l’état écologique des masses d’eau littorales de la façade Manche-Atlantique - Développement d’une base de données quantitatives sur les pressions anthropiques littorales

Within the European water framework directive (WFD), the status assessment of littoral waters is based both on the chemical quality and on the ecological quality of each water body. Quality elements enabling to assess the ecological status of a water body are, among other things, biological quality elements (phytoplankton, macroalgae, angiosperms, benthic invertebrates, fish), for each of which member states have developed quantitative indicators. This document compiles three deliverables of a multi-annual study intended to characterize the sensitivity of these biological indicators regarding the various anthropogenic pressures exerted on the French Atlantic and Channel coast: ultimately, the goal is to establish a quantitative and predictive relationship, statistically robust, between the WFD indicators used along the French channel and Atlantic coastline, and various anthropogenic pressures acting on these coasts. These three deliverables are the following : - The reports of various interviews performed with French national referents for the biological quality elements used within the littoral part of the WFD in Channel and Atlantic (phytoplankton, subtidal and intertidal macroalgae, opportunistic blooming macroalgae, angiosperms and benthic invertebrates). These interviews aimed to specify, for each metric constitutive of the BQE indicator (if multi-metric), the "relevant" pressures, as well as the trend of this impact, - Sheets describing the "pressure" and "environment" data available, in order to characterize spatially and quantitatively these "relevant" anthropogenic pressures acting on French Channel and Atlantic coast, - A progress report dealing with the development of a database tool, for archiving quantitative data characterizing "relevant" littoral anthropogenic pressures.