Growth performance of Chlorella ellipsoidea as biomicrocapsule using supernatant of digested sugar mill waste effluent

Biomicrocapsules mean microscopic living organisms which carry important nutrients, very essential for the growth and development of aquatic organisms as well as other animals. Among these biomicrocapsules, Chlorella ellipsoidea, an important green microalga (Chlorophyceae) which contains 40-45% crude protein, 12-16% crude lipid, 14-15% minerals, colour pigments, vitamins and carotene. The microalga, C. ellipsoidea was cultured in four different dilutions of supernatant of digested sugar mill effluent (DSME) i.e. 25, 50, 75 and 100% DSME and Bold basal medium (BBM) as control in laboratory condition. Maximum cell growth and chlorophyll a content of C. ellipsoidea were obtained on l0th day of culture in supernatant of 50% diluted DSME followed by those of this biomicrocapsule grown in BBM, and 75, 25 and 100% DSME at stationary phase. Cell number had highly (p<0.01) direct correlation with chlorophyll a (r = 0.889) of C. ellipsoidea, and optical density (r = 0.926) of media. Chlorophyll a was also highly (p<0.01) and directly correlated with optical density (r= 0.877) of media. The specific growth rates (µ/day) of cell and chlorophyll a of C. ellipsoidea grown in supernatant of 50% DSME were significantly (p<0.01) varied from those of C. ellipsoidea cultured in BBM followed by other DSME. Total biomass of C. ellipsoidea cultured in supernatant of 50% DSME was found significantly (p<0.01) higher than that of this microalga cultured in BBM, and supernatant of 25, 75 and 100% DSME. Similar trend was also observed in the case of optical density. The physico-chemical properties of media were varied with the growth of cell of this microalga. It was recorded that cell number, chlorophyll a of biomicrocapsule, and optical density of media were highly (p<0.01) and directly correlated with pH, hardness and alkalinity, and inversely correlated with nitrate-N. Crude protein and crude lipid of C. ellipsoidea grown in supernatant of 50% DSME were significantly (p<0.01) higher than those of C. ellipsoidea cultured in other DSME and BBM. Due to best growth performance exhibited by this microalga grown in supernatant of 50% DSME, it may be used to grow in supernatant of 50% DSME to get more essential nutrients than that cultured in supernatant of other DSME media.

Length correction for larval and early-juvenile Atlantic menhaden (Brevoortia tyrannus) after preservation in alcohol

Body length measurement is an important part of growth, condition, and mortality analyses of larval and juvenile fish. If the measurements are not accurate (i.e., do not reflect real fish length), results of subsequent analyses may be affected considerably (McGurk, 1985; Fey, 1999; Porter et al., 2001). The primary cause of error in fish length measurement is shrinkage related to collection and preservation (Theilacker, 1980; Hay, 1981; Butler, 1992; Fey, 1999). The magnitude of shrinkage depends on many factors, namely the duration and speed of the collection tow, abundance of other planktonic organisms in the sample (Theilacker, 1980; Hay, 1981; Jennings, 1991), the type and strength of the preservative (Hay, 1982), and the species of fish (Jennings, 1991; Fey, 1999). Further, fish size affects shrinkage (Fowler and Smith, 1983; Fey, 1999, 2001), indicating that live length should be modeled as a function of preserved length (Pepin et al., 1998; Fey, 1999).

Workers at Sprint Mill 1953

Five men working in the reinforcement of the Sprint Mill weir in Cumbria, UK. This photo is part of a photo album that includes pictures from 1935 to 1954.

Hatching cage Tower Mill, 1950

Photo of a hatching cage in Tower Mill, an unidentified location in the North West of England, UK. The image was taken in 1950. This photo is part of a Photo Album that includes pictures from 1935 to 1954.

Factors influencing colour production from the sugar medium used for the rapid approximation of bacterial counts in fishery products

Results of the studies carried out to elucidate the factors influencing colour production from the sugar medium used for the rapid approximation of bacterial counts in fishery products are reported. The effect of particle size, trace elements, salt soluble protein and non-protein fractions, rate of multiplication of bacteria, in the medium, surface bacteria and the rate of colour production by individual strains of bacteria were studied. It is observed that the best results are obtained when a sea-water homogenate is used.

Feasibility study of biofuel production from freshwater fern, Azolla sp in Anzali Wetland

Production of bioethanol through acidic and enzymatic hydrolysis of aquatic Azolla sp., as a new source of bio-mass, has been performed, as a means to control increasing growth and reducing undesirable effects of this plant in Anzali lagoon. After sampling, drying and crushing, Azolla was hydrolyzed, using diluted acid and enzyme. Diluted acid hydrolysis was done using both autoclave and a high-pressure system (Batch Synth® Microwave synthesizer). The effects of temperature and time (in autoclave) and concentration of acid (in both) were compared. Cellubrix®, a ommercial cellulase source, was used for enzymatic hydrolysis process. The amounts of reducing sugars, glucose and furfural, released from hydrolyzate, were measured. To produce alcohol, Sacchromyces cerevisiae (to ferment sixcarbon sugars), Zygowilliopsis californica and Pichia stipitis (to ferment five-carbon and sixcarbon sugars) were used. Maximum amounts of glucose (4.83% w/w) and reducing sugars (14.15% w/w) were obtained using acid hydrolysis in autoclave. In the microwave oven, maximum glucose (5.04% w/w) and reducing sugars (13.27 w/w) were obtained at 180 and 200 °C, respectively. Under these conditions, maximum produced furfural was 1.54 g/L. The difference between amounts of furfural obtained from acid hydrolysis of Azolla in microwave oven compared to autoclave was statistically significant. Amounts of alcohol produced and its yields were 3.99 g/L and 33.13% for S. cerevisiae in 48 hours, 3.73 g/L and 30.45% for Pichia stipites in 48 hours, and 3.73 g/L and 30.45% for Z. californica in 24 hours after inoculation, respectively, with significant differences. Statistical comparison of results showed significant differences (P<0.05) in glucose production, at different conditions. Amounts of reducing sugars and glucose increased after optimization of levels of acid, time, and temperature. The overall optimum released sugar and glucose were obtained with 1.67% (w/v) acid using autoclave. Higher temperatures in microwave oven caused a significant increase (P<0.05) in furfural. Furfural severely inhibits fermentation. Hence, regarding the issues of energy consumption and time, amounts of inhibiting substances and sugar production, autoclave is found to be superior to the high temperature and pressure, generated in microwave oven, for hydrolyzing Azolla. Furthermore, given the amounts of Azolla in Anzali lagoon, it may be recommendable to use this plant as a biomass resource.