Analysis of Sample Frames and Subsampling Methods for Reef Fish Surveys

Introduction: The National Oceanic and Atmospheric Administration’s Biogeography Branch has conducted surveys of reef fish in the Caribbean since 1999. Surveys were initially undertaken to identify essential fish habitat, but later were used to characterize and monitor reef fish populations and benthic communities over time. The Branch’s goals are to develop knowledge and products on the distribution and ecology of living marine resources and provide resource managers, scientists and the public with an improved ecosystem basis for making decisions. The Biogeography Branch monitors reef fishes and benthic communities in three study areas: (1) St. John, USVI, (2) Buck Island, St. Croix, USVI, and (3) La Parguera, Puerto Rico. In addition, the Branch has characterized the reef fish and benthic communities in the Flower Garden Banks National Marine Sanctuary, Gray’s Reef National Marine Sanctuary and around the island of Vieques, Puerto Rico. Reef fish data are collected using a stratified random sampling design and stringent measurement protocols. Over time, the sampling design has changed in order to meet different management objectives (i.e. identification of essential fish habitat vs. monitoring), but the designs have always remained: • Probabilistic – to allow inferences to a larger targeted population, • Objective – to satisfy management objectives, and • Stratified – to reduce sampling costs and obtain population estimates for strata. There are two aspects of the sampling design which are now under consideration and are the focus of this report: first, the application of a sample frame, identified as a set of points or grid elements from which a sample is selected; and second, the application of subsampling in a two-stage sampling design. To evaluate these considerations, the pros and cons of implementing a sampling frame and subsampling are discussed. Particular attention is paid to the impacts of each design on accuracy (bias), feasibility and sampling cost (precision). Further, this report presents an analysis of data to determine the optimal number of subsamples to collect if subsampling were used. (PDF contains 19 pages)

Description of economic data collected with a random sample of commercial reef fish boats in the Florida Keys

This study summarizes the results of a survey designed to provide economic information about the financial status of commercial reef fish boats with homeports in the Florida Keys. A survey questionnaire was administered in the summer and fall of 1994 by interviewers in face-to-face meetings with owners or operators of randomly selected boats. Fishermen were asked for background information about themselves and their boats, their capital investments in boats and equipment, and about their average catches, revenues, and costs per trip for their two most important kinds of fishing trips during 1993 for species in the reef fish fishery. Respondents were characterized with regard to their dependence on the reef fish fishery as a source of household income. Boats were described in terms of their physical and financial characteristics. Different kinds of fishing trips were identified by the species that generated the greatest revenue. Trips were grouped into the following categories: yellowtail snapper (Ocyurus chrysurus); mutton snapper (Lutjanus analis), black grouper (Mycteroperca bonaci), or red grouper (Epinephelus morio); gray snapper (Lutjanus griseus); deeper water groupers and tilefishes; greater amberjack (Seriola dumerili); spiny lobster (Panulirus argus); king mackerel (Scomberomorus cavalla); and dolphin (Coryphaena hippurus). Average catches, revenues, routine trip costs, and net operating revenues per boat per trip and per boat per year were estimated for each category of fishing trips. In addition to its descriptive value, data collected during this study will aid in future examinations of the economic effects of various regulations on commercial reef fish fishermen.(PDF file contains 48 pages.)

Description of sampling stations, methods of benthic sampling and biological water quality assessment; with some consideration of the influence of sample variation on the assessment values obtained

The first bilateral study of methods of biological sampling and biological methods of water quality assessment took place during June 1977 on selected sampling sites in the catchment of the River Trent (UK). The study was arranged in accordance with the protocol established by the joint working group responsible for the Anglo-Soviet Environmental Agreement. The main purpose of the bilateral study in Nottingham was for some of the methods of sampling and biological assessment used by UK biologists to be demonstrated to their Soviet counterparts and for the Soviet biologists to have the opportunity to test these methods at first hand in order to judge the potential of any of these methods for use within the Soviet Union. This paper is concerned with the nine river stations in the Trent catchment.

Corroborative studies on the effects of sample variation on three macroinvertebrate biological assessment methods at different water quality states

In recent collaborative biological sampling exercises organised by the Nottingham Regional Laboratory of the Severn-Trent Water Authority, the effect of handnet sampling variation on the quality and usefulness of the data obtained has been questioned, especially when this data is transcribed into one or more of the commonly used biological methods of water quality assessment. This study investigates if this effect is constant at sites with similar typography but differing water quality states when the sampling method is standardized and carried out by a single operator. An argument is made for the use of a lowest common denominator approach to give a more consistent result and obviate the effect of sampling variation on these biological assessment methods.

Dividing population genetic distance data with the software Partitioning Optimization with Restricted Growth Strings (PORGS): an application for Chinook salmon (Oncorhynchus tshawytscha), Vancouver Island, British Columbia

A new method of finding the optimal group membership and number of groupings to partition population genetic distance data is presented. The software program Partitioning Optimization with Restricted Growth Strings (PORGS), visits all possible set partitions and deems acceptable partitions to be those that reduce mean intracluster distance. The optimal number of groups is determined with the gap statistic which compares PORGS results with a reference distribution. The PORGS method was validated by a simulated data set with a known distribution. For efficiency, where values of n were larger, restricted growth strings (RGS) were used to bipartition populations during a nested search (bi-PORGS). Bi-PORGS was applied to a set of genetic data from 18 Chinook salmon (Oncorhynchus tshawytscha) populations from the west coast of Vancouver Island. The optimal grouping of these populations corresponded to four geographic locations: 1) Quatsino Sound, 2) Nootka Sound, 3) Clayoquot +Barkley sounds, and 4) southwest Vancouver Island. However, assignment of populations to groups did not strictly reflect the geographical divisions; fish of Barkley Sound origin that had strayed into the Gold River and close genetic similarity between transferred and donor populations meant groupings crossed geographic boundaries. Overall, stock structure determined by this partitioning method was similar to that determined by the unweighted pair-group method with arithmetic averages (UPGMA), an agglomerative clustering algorithm.

Advantages of using crest nets to sample presettlement larvae of reef fishes in the Caribbean Sea

Identifying the spatial and temporal patterns of larval fish supply and settlement is a key step in understanding the connectivity of meta-populations (Sale et al., 2005). Because of the potentially dispersive nature of the pelagic larval phase of most reef fishes, tracking cohorts from hatching to settlement is extremely difficult (but see Jones et al., 1999). However, for many studies it is sufficient to sample larvae immediately before settlement. Many coral reef fish species use mangrove and seagrass beds as nursery habitats (Nagelkerken et al., 2001; Mumby et al., 2004) and larvae of these species must pass over the reef crest in order to arrive at their preferred settlement habitats. The ability to sample this new cohort of larval fishes provides opportunities for researchers to explore the intricacies of the transition from larva to juvenile (Searcy and Sponaugle, 2001). Quantifying the potential settlers also provides valuable information about the spatial and temporal supply of presettlement larvae (Victor, 1986). Therefore a number of larval sampling methods were developed, one of which is the use of crest nets (Dufour and Galzin, 1993).

Precision estimates and suggested sample sizes for length-frequency data

For most fisheries applications, the shape of a length-frequency distribution is much more important than its mean length or variance. This makes it difficult to evaluate at which point a sample size is adequate. By estimating the coefficient of variation of the counts in each length class and taking a weighted mean of these, a measure of precision was obtained that takes the precision in all length classes into account. The precision estimates were closely associated with the ratio of the sample size to the number of size classes in each sample. As a rule-of-thumb, a minimum sample size of 10 times the number of length classes in the sample is suggested because the precision deteriorates rapidly for smaller sample sizes. In absence of such a rule-of-thumb, samplers have previously under-estimated the required sample size for samples with large fish, while over-sampling small fish of the same species.

A Bayesian method for identification of stock mixtures from molecular marker data

Molecular markers have been demonstrated to be useful for the estimation of stock mixture proportions where the origin of individuals is determined from baseline samples. Bayesian statistical methods are widely recognized as providing a preferable strategy for such analyses. In general, Bayesian estimation is based on standard latent class models using data augmentation through Markov chain Monte Carlo techniques. In this study, we introduce a novel approach based on recent developments in the estimation of genetic population structure. Our strategy combines analytical integration with stochastic optimization to identify stock mixtures. An important enhancement over previous methods is the possibility of appropriately handling data where only partial baseline sample information is available. We address the potential use of nonmolecular, auxiliary biological information in our Bayesian model.

Toward identification of larval sailfish (Istiophorus platypterus), white marlin (Tetrapturus albidus), and blue marlin (Makaira nigricans) in the western North Atlantic Ocean*

The identification of larval istiophorid billfishes from the western North Atlantic Ocean has long been problematic. In the present study, a molecular technique was used to positively identify 27 larval white marlin (Tetrapturus albidus), 96 larval blue marlin (Makaira nigricans), and 591 larval sailfish (Istiophorus platypterus) from the Straits of Florida and the Bahamas. Nine morphometric measurements were taken for a subset of larvae (species known), and lower jaw pigment patterns were recorded on a grid. Canonical variates analysis (CVA) was used to reveal the extent to which the combination of morphometric, pigment pattern, and month of capture information was diagnostic to species level. Linear regression revealed species-specific relationships between the ratio of snout length to eye orbit diameter and standard length (SL). Confidence limits about these relationships served as defining characters for sailfish >10 mm SL and for blue and white marlin >17 mm SL. Pigment pattern analysis indicated that 40% of the preflexion blue marlin examined possessed a characteristic lower jaw pigment pattern and that 62% of sailfish larvae were identifiable by lower jaw pigments alone. An identification key was constructed based on pigment patterns, month of capture, and relationships between SL and the ratio of snout length to eye orbit diameter. The key yielded identifications for 69.4% of 304 (blind sample) larvae used to test it; only one of these identifications was incorrect. Of the 93 larvae that could not be identified by the key, 71 (76.3%) were correctly identified with CVA. Although identif ication of certain larval specimens may always require molecular techniques, it is encouraging that the majority (92.4%) of istiophorid larvae examined were ultimately identifiable from external characteristics alone.

Field applications of the second-generation Environmental Sample Processor (ESP) for remote detection of harmful algae: 2006-2007

We assess the application of the second-generation Environmental Sample Processor (ESP) for the detection of harmful algal bloom (HAB) species in field and laboratory settings using two molecular probe techniques: a sandwich hybridization assay (SHA) and fluorescent in situ hybridization (FISH). During spring 2006, the first time this new instrument was deployed, the ESP successfully automated application of DNA probe arrays for various HAB species and other planktonic taxa, but non-specific background binding on the SHA probe array support made results interpretation problematic. Following 2006, the DNA array support membrane that we were using was replaced with a different membrane, and the SHA chemistry was adjusted. The sensitivity and dynamic range of these modifications were assessed using 96-well plate and ESP array SHA formats for several HAB species found commonly in Monterey Bay over a range of concentrations; responses were significantly correlated (p < 0.01). Modified arrays were deployed in 2007. Compared to 2006, probe arrays showed improved signal:noise, and remote detection of various HAB species was demonstrated. We confirmed that the ESP and affiliated assays can detect HAB populations at levels below those posing human health concerns, and results can be related to prevailing environmental conditions in near real-time.

Estimates of survival probabilities for oceanic-stage loggerhead sea turtles (Caretta caretta) in the North Atlantic

Estimates of instantaneous mortality rates (Z) and annual apparent survival probabilities (Φ) were generated from catch-curve analyses for oceanic-stage juvenile loggerheads (Caretta caretta) in the waters of the Azores. Two age distributions were analyzed: the “total sample” of 1600 loggerheads primarily captured by sighting and dipnetting from a variety of vessels in the Azores between 1984 and 1995 and the “tuna sample” of 733 loggerheads (a subset of the total sample) captured by sighting and dipnetting from vessels in the commercial tuna fleet in the Azores between 1990 and 1992. Because loggerhead sea turtles begin to emigrate from oceanic to neritic habitats at age 7, the best estimates of instantaneous mortality rate (0.094) and annual survival probability (0.911) not confounded with permanent emigration were generated for age classes 2 through 6. These estimates must be interpreted with caution because of the assumptions upon which catch-curve analyses are based. However, these are the first directly derived estimates of mortality and survival probabilities for oceanic-stage sea turtles. Estimation of survival probabilities was identified as “an immediate and critical requirement” in 2000 by the Turtle Expert Working Group of the U.S. National Marine Fisheries Service.

Optimization of stocking density for environmental-friendly improved extensive shrimp farming system in south-west part of Bangladesh

An experimental culture practice of P. monodon on extension approach was conducted in two brackish water earthen ponds of Demonstration Farm and Training Center (DFTC), Kaliganj, Satkhira. The experiment was aimed to provide farmers with appropriate technology that can immediately improve pond yield with keeping the environment in friendly condition. For optimization of stocking density of a cost effective environmental friendly improved extensive shrimp farming, the ponds were stocked with coastal river post larvae of P. monodon at the stocking rates of 2 pls/m² and 2.5 pls/m² without supplementary feeding. To control experimental error another five farmer's gher were used as replicates of each demo-pond. Considering the farmers buying ability, cost of inputs and other facilities kept minimal. The impact of stocking density was evaluated on the basis of growth, survival rate, production and economic return. Better production (average 299.01 kg/ha) with same survival rate (39.33%) were found with a stocking density of 2.5 pls/m² without causing any deterioration in the culture environment.

Production of quality dried small indigenous fish species products using low cost solar tunnel drier

A low cost solar drier was constructed using locally available materials. The size of the drier was 20x3.6x3 having drying capacity of 80 kg of SIS (w/w). Optimization of moisture content was observed for mola, dhela, chapila, chanda and puti at temperature ranges between 40-45°C and 50-55°C in solar tunnel drier. There was little or no change in moisture content at temperature below 40°C during the first 3 hours. Then the moisture content declined gradually with the increase of drying period. On the other hand, at temperature between 50-55°C, moisture content started to decline after 2 hours of drying. The moisture content of the sample reached at about 16% after 26 hours of sun drying at 40-45°C and 20 hours at 50-55°C. The optimum temperature for producing high quality dried products was 45-50°C in solar tunnel drier. The temperature and relative humidity outside and inside the dryers (with fish) at various locations were recorded from 8.00am to 4.00pm. The normal atmospheric ambient temperature was recorded in the range of 25-37°C from at 8:00am to 4:00pm. During the same period the atmospheric relative humidity recorded was in the range of 30-58%. On the other hand, the maximum temperature inside the dryers was recorded in the range of 28-65°C. The lowest temperature recorded was 28°C in the morning and at 13.00pm the highest temperature 65°C was recorded. The maximum relative humidity 58% found in the afternoon and minimum of 28% at noon. There was inverse relationship between temperature intensity of sunshine and humidity which decreased as sunshine increased. In total, it took around 26 hours of drying to reduce the moisture level to about 16%.

Optimization of dose of methyltestosterone (MT) hormone for sex reversal in tilapia (Oreochromis niloticus L.)

This paper describes the optimization of dose of methyltestosteronei (MT) hormone for masculinization of tilapia (Oreochromis niloticus). Five treatments (i.e. T1 T2, T2, T4 and T5) with different doses such as 0, 40, 50, 60 and 65 mg of MT hormone were mixed with per kg of feed for each treatment and fed the fry four times a day up to satiation for a period of 30 days. The stocking density was maintained 10 spawn/liter of water. The growth of fry at different treatments was recorded weekly and mortality was recorded daily. At the end of hormone feeding the fry were reared in hapas fixed in ponds for another 70 days and at the 100th day the fish were sexed by the gonad squashing and aceto-carmine staining method. The analysis of growth data did not show any significant variation in length and weight of fish among the different treatments. High mortality of fry ranging 66% to 81.6% was observed in different treatments and highest mortality was observed during the first twelve days of the experiment. The sex ratio analysis showed that T2 (40 mg/kg) and T5 (65 mg/kg) produced 93.33% of sex reversed male and T3 (50 mg/kg) and T4 (60 mg/kg) produced 96.66% sex reversed male, and these ratios were significantly (p<0.05) different from 1:1 male: female sex ratio. The control, T1 (0 mg/kg) contained 43.33% male progeny. From these results it is suggested that either 50 mg/kg or 60 mg/kg of MT with a feeding period of 30 days could be considered as an optimum dose for masculinization of tilapia (O. niloticus).