A study of the length at maturity and hooks/gill net mesh selection in Clarias lazera from Lake Chad

The minimum length at first maturity of Clarias lazera was found to be 24 cm (4.8%) for females and 20 cm (1.8%) for males. Fifty percent maturity was attained at length of 28 cm to 30 cm for both sexes; there being little difference among the sexes at this level of maturity. The modal retention lengths for gill nets were: 13 cm for 25.5 mm mesh; 18 cm for 32 mm mesh; 28 cm for 57 mm mesh; and 38 cm for 76 mm mesh. Modal lengths of Clarias lazera caught by various hooks sizes were No. 10 (28 cm); No. 11 (33 cm); Nos. 15 and 16 (28 cm). It is recommended that to protect the clarias fishery in Lake Chad, the use of gill nets of less than 57 mm mesh size and fishing hook No. 16 (and smaller sizes) which caught 43.94% of immature fishes should be discouraged

IBM PC Data Acquisition and Processing Software Evaluation

Commercially available software packages for IBM PC-compatibles are evaluated to use for data acquisition and processing work. Moss Landing Marine Laboratories (MLML) acquired computers since 1978 to use on shipboard data acquisition (Le. CTD, radiometric, etc.) and data processing. First Hewlett-Packard desktops were used then a transition to the DEC VAXstations, with software developed mostly by the author and others at MLML (Broenkow and Reaves, 1993; Feinholz and Broenkow, 1993; Broenkow et al, 1993). IBM PC were at first very slow and limited in available software, so they were not used in the early days. Improved technology such as higher speed microprocessors and a wide range of commercially available software made use of PC more reasonable today. MLML is making a transition towards using the PC for data acquisition and processing. Advantages are portability and available outside support.

Dividing population genetic distance data with the software Partitioning Optimization with Restricted Growth Strings (PORGS): an application for Chinook salmon (Oncorhynchus tshawytscha), Vancouver Island, British Columbia

A new method of finding the optimal group membership and number of groupings to partition population genetic distance data is presented. The software program Partitioning Optimization with Restricted Growth Strings (PORGS), visits all possible set partitions and deems acceptable partitions to be those that reduce mean intracluster distance. The optimal number of groups is determined with the gap statistic which compares PORGS results with a reference distribution. The PORGS method was validated by a simulated data set with a known distribution. For efficiency, where values of n were larger, restricted growth strings (RGS) were used to bipartition populations during a nested search (bi-PORGS). Bi-PORGS was applied to a set of genetic data from 18 Chinook salmon (Oncorhynchus tshawytscha) populations from the west coast of Vancouver Island. The optimal grouping of these populations corresponded to four geographic locations: 1) Quatsino Sound, 2) Nootka Sound, 3) Clayoquot +Barkley sounds, and 4) southwest Vancouver Island. However, assignment of populations to groups did not strictly reflect the geographical divisions; fish of Barkley Sound origin that had strayed into the Gold River and close genetic similarity between transferred and donor populations meant groupings crossed geographic boundaries. Overall, stock structure determined by this partitioning method was similar to that determined by the unweighted pair-group method with arithmetic averages (UPGMA), an agglomerative clustering algorithm.

The ECOPATH II software

Problems involved in the development of ecosystem models are discussed, considering in particular the use of the ECOPATH II software and the approach used at ICLARM in the project Global comparisons of trophic aquatic ecosystem models designed to support modelling efforts of research groups throughout the world.

ICLARM software projects: back to the future

The different computer softwares developed by the International Center for Living Aquatic Resources (ICLARM) and its functions and uses in fisheries science are presented.

A computer software package for assessing and managing risks posed by experiments with genetically modified fish and shellfish

Assessment and management of risk is needed for sustainable use of genetically modified aquatic organisms (aquatic GMOs). A computer software package for safely conducting research with genetically modified fish and shellfish is described. By answering a series of questions about the organism and the accessible aquatic ecosystem, a researcher or oversight authority can either identify specific risks or conclude that there is a specific reason for safety of the experiment. Risk assessment protocols with examples involving transgenic coho salmon, triploid grass carp and hybrid tilapia are described. In case a specific risk is identified, the user is led to consider risk management measures, involving culture methods, facilities design and operations management, to minimize the risk. Key features of the software are its user-friendly organization; easy access to explanatory text, literature citations and glossary; and automated completion of a worksheet. Documented completion of the Performance Standards can facilitate approval of a well designed experiment by oversight authorities.

Size at first maturity of the anchovy (Engraulis encrasicolus) in Ghanaian waters and suggestions for appropriate mesh size in its fishery

The main length at first maturity of anchovy Engraulis encrasicolus in Ghanaian waters has been estimated using length-frequency and gonad data sampled between June 1983 and September 1986 off Accra and Tema, Ghana. The length at first maturity of these fish is around 5.7 cm (fork length). The minimum mesh size for rational exploitation of the resource in Ghanaian waters is put at about 20 mm (0.8 inch).

Biological parameters, body length-weight and length-height relationships for various species in Greek waters

Biological/fisheries parameters (L sub(oo) M, F) are presented for four fish species (Gadiculus argenteus; Gaidropsarus mediterraneous; Symphurus ligulatus; Lepidorhombus boscii) as well as body length-weight and length-height relationships for 11 and 12 fish species, respectively, estimated from trawl samples collected using three different cod-ends (stretched mesh size: 14 mm and 20 mm diamond-shaped and 20 mm square-shaped) during 1993-1994, in the western Aegean and North Euboikos Gulf, Greece. The fisheries paramaters, estimated from length-frequency using the ELEFAN approach and software, are discussed in the light of recent information on the selectivity of the presently used trawl cod-end (14 mm diamond shaped)

Escapement of the Cape rock lobster (Jasus lalandii ) through the mesh and entrance of commercial traps

Metal-framed traps covered with polyethylene mesh used in the fishery for the South African Cape rock lobster (Jasus lalandii) incidentally capture large numbers of undersize (<75 mm CL) specimens. Air-exposure, handling, and release procedures affect captured rock lobsters and reduce the productivity of the stock, which is heavily fished. Optimally, traps should retain legalsize rock lobsters and allow sublegal animals to escape before traps are hauled. Escapement, based on lobster morphometric measurements, through meshes of 62 mm, 75 mm, and 100 mm was investigated theoretically under controlled conditions in an aquarium, and during field trials. SELECT models were used to model escapement, wherever appropriate. Size-selectivity curves based on the logistic model fitted the aquarium and field data better than asymmetrical Richards curves. The lobster length at 50% retention (L50) on the escapement curve for 100-mm mesh in the aquarium (75.5 mm CL) approximated the minimum legal size (75 mm CL); however estimates of L50 increased to 77.4 mm in field trials where trapentrances were sealed, and to 82.2 mm where trap-entrances were open. Therfore, rock lobsters that cannot escape through the mesh of sealed field traps do so through the trap entrance of open traps. By contrast, the wider selection range and lower L25 of field, compared to aquarium, trials (SR = 8.2 mm vs. 2.6 mm; L25 =73.4 mm vs. 74.1 mm), indicate that small lobsters that should be able to escape from 100-mm mesh traps do not always do so. Escapement from 62-mm mesh traps with open entrance funnels increased by 40−60% over sealed traps. The findings of this study with a known size distribution, are related to those of a recent indirect (comparative) study for the same species, and implications for trap surveys, commercial catch rates, and ghost fishing are discussed.

Blue Crab, Callinectes sapidus, Trap Selectivity Studies: Mesh Size

Catch rates and sizes of blue crabs, Callinectes sapidus, were compared in traps with 2.54 cm (1.0 inch), 3.81 cm (1.5 inches), and 5.08 cm (2.0 inches) square mesh, 2.54 by 5.08 cm rectangular mesh, and 3.81 cm hexagonal mesh. Catch of legal blue crabs by number was significantly greater in the traditional hexagonal mesh trap than in all other trap types. Sublegal catch by number was highest (34.1-63.3% of total) in the 2.54 cm and 3.81 cm square mesh and rectangular mesh traps and lowest in the 5.08 cm square mesh trap. The hexagonal mesh trap had significantly lower catch rates of sublegal blue crabs than all other trap types except the 5.08 cm square mesh. Mean size of blue crabs by trap type exhibited an inverse pattern to that shown by catch of sublegal crabs. The most effective trap to maximize legal catch and minimize sublegal catch was the 3.81 cm hexagonal mesh trap followed by the 5.08 cm square mesh trap.

The Effects of Fish Trap Mesh Size on Reef Fish Catch off Southeastern Florida

Catch and mesh selectivity of wire-meshed fish traps were tested for eleven different mesh sizes ranging from 13 X 13 mm (0.5 x 0.5") to 76 x 152 mm (3 X 6"). A total of 1,810 fish (757 kg) representing 85 species and 28 families were captured during 330 trap hauls off southeastern Florida from December 1986 to July 1988. Mesh size significantly affected catches. The 1.5" hexagonal mesh caught the most fish by number, weight, and value. Catches tended to decline as meshes got smaller or larger. Individual fish size increased with larger meshes. Laboratory mesh retention experiments showed relationships between mesh shape and size and individual retention for snapper (Lutjanidae), grouper (Serranidae), jack (Carangidae), porgy (Sparidae), and surgeonfish (Acanthuridae). These relationships may be used to predict the effect of mesh sizes on catch rates. Because mesh size and shape greatly influenced catchability, regulating mesh size may provide a useful basis for managing the commercial trap fishery.