Technologies for Measuring Currents in Coastal Environments, Portland, Maine, October 26-28, 2005:workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop entitled "Technologies for Measuring Currents in Coastal Environments" was held in Portland, Maine, October 26-28, 2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), an ACT partner organization. The primary goals of the event were to summarize recent trends in nearshore research and management applications for current meter technologies, identify how current meters can assist coastal managers to fulfill their regulatory and management objectives, and to recommend actions to overcome barriers to use of the technologies. The workshop was attended by 25 participants representing state and federal environmental management agencies, manufacturers of current meter technologies, and researchers from academic institutions and private industry. Common themes that were discussed during the workshop included 1) advantages and limitations of existing current measuring equipment, 2) reliability and ease of use with each instrument type, 3) data decoding and interpretation procedures, and 4) mechanisms to facilitate better training and guidance to a broad user group. Seven key recommendations, which were ranked in order of importance during the last day of the workshop are listed below. 1. Forums should be developed to facilitate the exchange of information among users and industry: a) On-line forums that not only provide information on specific instruments and technologies, but also provide an avenue for the exchange of user experiences with various instruments (i.e. problems encountered, cautions, tips, advantages, etc). (see References for manufacturer websites with links to application and technical forums at end of report) b) Regional training/meetings for operational managers to exchange ideas on methods for measuring currents and evaluating data. c) Organize mini-meetings or tutorial sessions within larger conference venues. 2. A committee of major stakeholders should be convened to develop common standards (similar to the Institute of Electrical and Electronics Engineers (IEEE) committee) that enable users to switch sensors without losing software or display capabilities. (pdf contains 28 pages)

Measuring Learning Outcomes in Library Instruction

The author uses clicker technology to incorporate polling and multiple choice question techniques into library instruction classes. Clickers can be used to give a keener understanding of how many students grasp the concepts presented in a specific class session. Typically, a student that aces a definition-type question will fail to answer an application-type question correctly. Immediate, electronic feedback helps to calibrate teaching approaches and gather data about learning outcomes. This presentation will analyze learning outcomes specific to scientific disciplines, and demonstrate the usefulness of clickers to engage and sustain student learning.

The design and development of the Windermere Profiler. An instrument for measuring how various environmental parameters vary with depth in lakes, reservoirs and rivers

A review article detailing the background, development and functionality of the Windermere Profiler, a multi parameter environmental monitoring instrument for use in lakes, reservoirs and rivers. The article explains the requirement for regular data collection by the Freshwater Biological Association at Windermere. The article covers the requirements of a profiling instrument, the design considerations, the electronic circuitry, the computer program, the operation of the computer software, the profiler in use and further developments to the design. A number of figures and images accompany the article.

Measuring transaction costs of fisheries co-management in San Salvador Island, Philippines

It is generally accepted that co-management systems are more cost-effective than centralized management of natural resources. However, no attempts have been made to empirically verify the transaction costs involved in fisheries co-management. Some estimates of transaction costs of fisheries co-management in San Salvador Island, Philippines, are presented in this paper. These estimates are used to compare the various transaction costs in co-managed and in centrally managed fisheries in San Salvador Island.

Measuring ICLARM's impact on research and researchers

For a research organization such as ICLARM which carries out long-term basic research, justifying money spent can be a difficult exercise. This articles examines different ways by which impact of ICLARM research can be measured.

Comparison of Standard Length, Fork Length, and Total Length for Measuring West Coast Marine Fishes

Measurements of adult marine fishes on the U.S. west coast are usually made using one of three methods: standard length, fork length, or total length. Each method has advantages and disadvantages. In this paper we attempt to determine whether one method is faster and/or more reliable than the other methods. We found that all three methods were comparable. There was no appreciable difference in the time it took to measure fish using the different methods. Fork length had the most reproducible results; however, it had the highest level of bias between researchers. We therefore suggest that selection of measurement type be based on what other researchers have used for the species under study. The best improvement in measurement reliability probably occurs by adequate training of personnel and not type of measurement used.

Measuring Fishing Capacity and Utilization with Commonly Available Data: An Application to Alaska Fisheries

Due to a lack of data on vessel costs, earnings, and input use, many of the capacity assessment models developed in the economics literature cannot be applied in U.S. fisheries. This incongruity between available data and model requirements underscores the need for developing applicable methodologies. This paper presents a means of assessing fishing capacity and utilization (for both vessels and fish stocks) with commonly available data, while avoiding some of the shortcomings associated with competing “frontier” approaches (such as data envelopment analys

The survey of sexual maturity in Mugil cephalus so measuring sex hormones and histologic studies

In this study the process of female gray mullet brooders was carried out by using histological study and masurment of sex steroids. Results of histological studies showed that oocyte of gray mullet brooders in Gomishan Rearing Center conditions of develop to the end of yolk globule stage. The results were observed with oocyte in chromatin nucleolar stage (first stage) with means of diameter of 20 p m, in August, perinucleolar stage (second stage) in September with mean diameter of 87 p m, yolk vesicle stage (third stage) in October with mean diameter 200 p m and yolk granules stage (forth stage) from October to November with average diameter of 180 — 650 p m. For the reason of stopping oocyte develop at the end of fourth stage, hormonal induction to final oocyte maturation and ovulation was used. For this purpose, carp pituitary , HCG and LRH-A2 with different combinations were used in two stages, second injection was used 24 hours after first injection. 15 females brooders were divided in 5 groups, different hormonal combinations were injected to four groups and to fifth group as control, only saline, was injected. The process of female brooder rippening in hormonal induction was studied via masurment of sex steroids including 17 a - hydroxy progestrone, estradio1-17)6 and testosterone. Blood samples were collected from caudal vein during first injection, 24, 30 and 48 hours after the first injection. At the same time, for distinguishing histological changes the sample has been attained from the gonads Sex stroid fluctuation patterns in different brooder groups that injected hormon were similar, however hormonal composition had similar effects. All brooder that their oocyte in the beginning of hormonal injection were At the end of fourth stage with oocyte diameter average of 600 p m received to final maturation and ovulation. The brooder that its oocytes were At the begining or mid-fourth stage did not show ovulation but hormonal induction caused oocyte develop at the beginning of fifth stage. Study of 17-hydroxy progestrone fluctuation showed that the maximum level of this steroid (0.347 ng/ml) measured 30 hours after the first injection and was significantly higher (p< 0.05) than those of control group. So, 17-hydroxy progestrone is probably precursor of maturation inducing steroid (MIS). However the maximum level of that observed was coincident with germinal vesicle breakdown, oil droplets coalescence and dissolution of yolk granuls The maximum levels of esteradiol— 17/0 and testosterone (3.778 and 16.801ng/ml,respectively) in spawned brooders,were observed 24 hours after the first injection. levels of those steroids were significantly higher (p<0.05) than control group. Maximum level of sex steroids in the brooders that did not spawn to the end of treatment was observed with more delay than those in spawned brooders. Therefor maximum level of 17a-hydroxy progestrone (0.264 ng/ml) in those brooders observed in fourth sampling time and the maximum levels of estradio1-17a and testosterone (2.944 and 18.993 ng/ml, respectivly)observed in third sampling time that was significantly higher (p<0.05) than those of control group. For the study of stress effect on brooders during the hormonal induction, level of cortisol was measured in every sampling time. level of cortisol had high fluctuation that showed handling level and stress effect on brooders. However maximum level of cortisol in majority of brooders was dominant in third sampling time that was coincident with final maturation.

Meeting on BOBLME engagement in the International Indian Ocean Expedition 50th anniversary initiative (IIOE-2), Bangkok, Thailand, 17-18 March, 2015

Objectives included; a contribution to understanding large-scale processes affecting the Bay of Bengal Large Marine Ecosystem Project (BOBLME) and it's living resources; and to align with International Indian Ocean Expedition (IIOE-2) (2015-2020) which will extensively explore and study the Indian Ocean to improve understanding of the ocean and coupled climate processes.

Liver cytochrome oxidase P4501A1 purification of Acipenser persicus and designing ELISA for measuring

Moon oxygenases related to cytochrome P450s are the molecular Biomarkers which have important role in Biotransformation of endogenous and exogenous compounds and catalazyin of many biological reactions. One of the important isoenzyme is cytochrome P4501A. This isoenzyme involved in metabolism of environment pollutnts such as PAHs. Because of its inducibility, it has a key tool for impact assesment of contaminants in aquatic environment. In this study, at first, that fractions containing Acipenser persicus and Huso huso isoenzyme were purified, and after that Antibodies against them were prepared. For isolation of isoenzyme fraction, Microsomes were prepared from fish liver using differential centrifugation at high speeds. microsomes were solubiized by cholat sodium and Emulgen. Extraction of this isoenzyme was done with the combinatuion of ionexchange chromatography and gelfiltration or chromatofocusing chromatography. Ion exchange chromatography and gel filtration were applied in DEAE sepharose fast flow and sephacryl S200 respectively and chromatofocusing was done at poly buffer 74 and 94 exchanger. The results of SDS-PAGE Showed that the molecular weight of isoenzyme was about 58±1 KDa. Furthermore the inmunoblotting results confirmed this subject. Isoenzyme activigy based on EROD (Ethoxyresorofin o-deethylase) reaction showed about 20-26 fold increase in enzyme activity of treated fish than control fish. The results of Elisa, Using monoclonal anti cod P4501A demonstrated the inducibility and highly elevated of its activity in treated sample more than the control fish. Mean while, the fish sample were showed the strong reaction to polyclonal antibody against beluga P4501A1 prepared in our Lab compared to monoclonal anti body.