Development of lobster traps: preliminary experiments with three new designs of rectangular, Australian pot and ink-well traps

Result of experimental lobster fishing with three new designs, namely rectangular, Australian pot and ink-well traps at Muttam, Kadiapatnam, Colachal, Enayam and Vizhinjam, south-west coast of India during 1979-80 are reported. Preliminary studies show that Australian pot and rectangular traps as more efficient to the ink-well type.

Extent of trial of improved designs of lobster traps

The mean extent of trial of an improved design of lobster trap by 45 fishermen was 26.46. The cost of local traps and number of seasons used were both significantly negatively associated with the extent of trials; its relationship with the annual catch by indigenous trap approached significance. These three variables accounted for 59% of the variance in the extent of trial.

Adoption of CIFT fishing boat designs

Information about the adoption of CIFT fishing boat designs was collected from 54 boat building yards of the country. The majority of the boats were built as per CIFT designs. The types of wood used and the designs were dependent upon each other. Other variables studied did not show significant effects upon the type of adoption. The CIFT designs were modified at some yards and these details are discussed.

Effect of Aquathol K Treatments on Activity Patterns of Largemouth Bass in Two Coves of Lake Seminole, Georgia

Thirty largemouth bass ( Micropterus salmoide s Lacepde) were implanted with radio tags in late October 2003 in two coves of Lake Seminole, Georgia, and tracked over a 24-hour period about every 10 days to determine their response to herbicide application. After five weeks of tracking, hydrilla ( Hydrilla verticillata Royle) in each cove was treated in early December 2003 with dipotassium salt of endothall (Aquathol K; 7-oxabicyclo [2.2.1] heptane-2,3-dicarboxylic acid) at a rate of 3.5 ppm. Largemouth bass were tracked during application and tracking continued for three months post treatment to assess effects of herbicide treatment on activity patterns. The treatment in Desser Cove successfully reduced hydrilla in approximately half the cove. However, the treatment in Peacock Lake completely eliminated all submersed aquatic vegetation (SAV) by April 2004. Movement and activity centers remained similar between treatment periods in Desser Cove, but increased after treatment in Peacock Lake. Depth occupied by telemetered fish decreased after Aquathol K treatment in both coves. In general, behavior of largemouth bass did not change appreciably during treatment, and only minor changes were observed in the posttreatment period in Peacock Lake, where all SAV was eliminated. Fish showed little attraction to or movement away from treatment areas, and fish migration from either cove was nil after treatment. Application of Aquathol K and subsequent reduction of SAV had little effect on largemouth bass behavior or movement. (PDF has 8 pages.)

Configurations and relative efficiencies of shrimp trawls employed in southeastern United States waters

Common shrimp trawl designs employed in the southeastern United States shrimp fishery are the flat, balloon, semiballoon, jib, and super X-3. Recent innovations in trawl design and rigging, including the twin trawl rigging and tongue trawl design, have improved the efficiency of shrimp trawling gear. A description of the construction techniques for the different designs indicate differences which affect gear performance. Measurements of horizontal spread and vertical opening for 76 trawl configurations indicate the relative efficiencies of the different designs. Maximum horizontal spreading efficiency was achieved by the "twin" and "tongue" trawl designs followed by the super X-3, jib, balloon, and semiballoon designs. Designs having the greatest vertical openings were the tongue and flat trawl designs followed by the semiballoon. Maximum total gape dimension was demonstrated by the "Mongoose" tongue trawl. Comparison of trawl spreading efficiency and door area to headrope length ratio indicates that a range of 70-80 in square (per door) of door area is required for each foot of trawl headrope length for maximum efficiency with conventional trawl designs and 66-75 in square per foot of headrope for tongue trawl designs. (PDF file contains 18 pages.)

Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Exploratory survey of Malian and Ndururu traps in River Rima, north western Nigeria

The fabrication and operational techniques of Malian and Ndurutu traps mostly used by the fishermen in River Rima in north western Nigeria were evaluated through structured questionnaire and measurement of samples of the Data collected were analyzed using descriptive statistics. There was no standard in the dimensions of either of the traps. The traps were made of locally sourced materials, except the synthetic net of the Malian trap. About 81 and 80% of the respondents fabricated their Malian and Ndurutu traps, respectively. The major problems encountered in the structure and operation of the Malian trap included projection above water, stealing of catches and trap, and trapping of small sized fishes as indicated by 61.9, 47.6 and 28.6% of the respondents, respectively. In the case of the Ndurutu trap, 72.0, 48.0, 12.0 and 8.0% of the respondents respectively indicated poor durability, single entrance valve, destruction by cattle and instability in water, as the major problems encountered. As improvement measures for the Malian trap, the respondents suggested increase in number and size of valve (81.0%), horizontal positioning (57.1%) and square shape (47.6%) while 52.0% each suggested increase in number of entrance valve and netting of Ndurutu trap. The fishermen demonstrated ingenuity in the fabrication and operation of the traps, but they failed to initiate the required improvement. It is important to critically examine the designs, materials, costs and limitations of the traps and the suggestions of the fishermen, as basis for improvement on the technology of the traps

Descriptions of Oscillatoria agardhii, O.prolifera and O.rubescens only [Translation from: Translation from: Flora Slodkowodna Polski. Tom 2. Cyanophyta, Glaucophyta (ed. K. Starmach) p350-352. Warsaw, Polska Academia Nauk, 1966]

Short morphological observations are given for the Cyanophyceae Oscillatoria Agardhii, Oscillatoria prolifica and Oscillatoria rubescens.

Review of investigation on the feeding of the European grayling [Translation from: Flora Slodkowodna Polski. Tom 2. Cyanophyta, Glaucophyta (ed. K. Starmach) p350-352. Warsaw, Polska Academia Nauk, 1966]

The composition of the food of the European grayling and the character of its feeding has been studied fully enough, but this knowledge is scattered in the literature and often contradictory. rare exceptions, analysis of the results of different investigations. Therefore the proposed short outline of the history of the study of the problem with a description of the basic data on the feeding of the grayling in different geographical areas is presented as expedient and opportune, primarily in relation to the determination of immediate problems and the trend of research.

Construction and Operation of a Two-place Diver's Sled

Fisheries gear researchers have employed scuba diver-operated sleds to evaluate towed fishing systems since the early 1950's. One of the earliest sled designs was a converted Stokes litter in which two divers sat tandem with the forward diver operating the diving controls (Sand, 1956). The litter was relatively easy to maneuver and provided a comfortable platform for observing operational fishing gear. However, the use of underwater photographic equipment to document gear performance was difficult due to the limited mobility of the observer-cameraman.

The Fish Funnel: A Trawl Modification to Reduce Fish Escapement

In the Gulf of Mexico there is a need to assess the potential of underutilized fish resource stocks before a commercial fishery develops. Standard sampling trawls used in the Gulf are ineffective for sampling the resource, so larger, high opening, bottom trawls have been introduced. The larger trawls are more effective, but most of the faster swimming fish species are able to escape these nets, especially during haul back. To reduce fish escapement, webbing panels, attached inside the trawls ahead of the cod ends, were tested. Initial tests were conducted with two single panel designs--a fish flap and a "floppa." Neither design reduced fish escapement. The floppa distorted the trawl webbing and actually increased fish escapement. A multi-panel conical funnel design (the fish funnel) was tested and found to increase fish retention by trapping the fish after they passed through it. When used in combination with a technique known as pulsing the trawl, the fish funnel substantially increased trawl catch rates with no indication of fish escapement.

Longitudinal logbook survey designs for estimating recreational fishery catch, with application to ayu (Plecoglossus altivelis)

Longitudinal surveys of anglers or boat owners are widely used in recreational fishery management to estimate total catch over a fishing season. Survey designs with repeated measures of the same random sample over time are effective if the goal is to show statistically significant differences among point estimates for successive time intervals. However, estimators for total catch over the season that are based on longitudinal sampling will be less precise than stratified estimators based on successive independent samples. Conventional stratified variance estimators would be negatively biased if applied to such data because the samples for different time strata are not independent. We formulated new general estimators for catch rate, total catch, and respective variances that sum across time strata but also account for correlation stratum samples. A case study of the Japanese recreational fishery for ayu (Plecoglossus altivelis) showed that the conventional stratified variance estimate of total catch was about 10% of the variance estimated by our new method. Combining the catch data for each angler or boat owners throughout the season reduced the variance of the total catch estimate by about 75%. For successive independent surveys based on random independent samples, catch, and variance estimators derived from combined data would be the same as conventional stratified estimators when sample allocation is proportional to strata size. We are the first to report annual catch estimates for ayu in a Japanese river by formulating modified estimators for day-permit anglers.

The 66 k-Da protein identified as a light meromyosin is involved in the setting of surimi

The 66 kilo-Dalton (k-Da) protein split off from the cross linked myosin heavy chain (CMHC) formed due to the setting of Alaska pollack surimi, frozen-storage of Pacific cod flesh, and vinegar-curing of Pacific mackerel mince was identified as a light meromyosin (LMM). Puncture and stress-relaxation tests showed that the actomyosin subunits (AMS) of Alaska pollack surimi, upon setting at 30°C, transformed into gel, although the elasticity of this gel was very low when compared to the gels from surimi or actomyosin (AM). Electrophoretic studies showed that the band due to LMM in the gel from AMS gradually disappeared with the progress of setting but higher molecular weight polymer did not form. The intensity of the bands due to other myosin sub-fragments decreased a little. The findings suggest that at setting temperature, LMM of MHC molecule leads to an unfolding resulting in an intramolecular aggregation through non-covalent interactions, and thus plays a significant role in the crosslinking of MHC.

Comparative fishing experiments with two trawl designs used in the inshore waters off Kakinada (Andhra Pradesh)

The importance of small trawlers for the economic exploitation of the inshore demersal fisheries is well recognized and accordingly mechanized boats of sizes 30' and 32' fitted with engines of h.p. ranging from 30 to 45 came into existence particularly at Kakinada. The need to work out the most suitable trawling gear for these classes of boats becomes imperative and as an appurtenance to this, comparative fishing experiments were attempted with different trawls. In the present communication certain observations made on the relative catch efficiency of two different trawl nets used in combination with two different shaped otter boards are given.