Quantification of drag and lift imposed by pop-up satellite archival tags and estimation of the metabolic cost to cownose rays (Rhinoptera bonasus)

The recent development of the pop-up satellite archival tag (PSAT) has allowed the collection of information on a tagged animal, such as geolocation, pressure (depth), and ambient water temperature. The success of early studies, where PSATs were used on pelagic fishes, has spurred increasing interest in the use of these tags on a large variety of species and age groups. However, some species and age groups may not be suitable candidates for carrying a PSAT because of the relatively large size of the tag and the consequent energy cost to the study animal. We examined potential energetic costs to carrying a tag for the cownose ray (Rhinoptera bonasus). Two forces act on an animal tagged with a PSAT: lift from the PSATs buoyancy and drag as the tag is moved through the water column. In a freshwater flume, a spring scale measured the total force exerted by a PSAT at flume velocities from 0.00 to 0.60 m/s. By measuring the angle of deflection of the PSAT at each velocity, we separated total force into its constituent forces — lift and drag. The power required to carry a PSAT horizontally through the water was then calculated from the drag force and velocity. Using published metabolic rates, we calculated the power for a ray of a given size to swim at a specified velocity (i.e., its swimming power). For each velocity, the power required to carry a PSAT was compared to the swimming power expressed as a percentage, %TAX (Tag Altered eXertion). A %TAX greater than 5% was felt to be energetically significant. Our analysis indicated that a ray larger than 14.8 kg can carry a PSAT without exceeding this criterion. This method of estimating swimming power can be applied to other species and would allow a researcher to decide the suitability of a given study animal for tagging with a PSAT.

Stick held drag net for shore line fishes of reservoirs

Observations on the use of stick held drag nets for the removal of shore line fish, which adversely affect the growth of commercially important species in reservoirs, are presented.

Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Influence of starvation on selected temperatures in the young of bream, roach and perch [Translation from: Informatsionnyi Byulleten Biologiya Vnutrennikh Vod No.50, 45-47, 1981]

Works devoted to the influence of starvation on temperature selection by fishes are few and their conclusions are contradictory. This study determined the influence of brief, up to 14 days, starvation on temperature selection by young fishes. The experiments were carried out in August-September 1976 on fingerling bream (Abramis brama L.), roach (Rutilus rutilus L.) and perch (Perca fluviatilis L.) with body lengths of 3-5 cm and weight 0.5-1.2 g. The young fish were caught in the littoral by seine-nets or small drag-nets. Immediately after catching the fish they were put in acclimatization boxes. The period of acclimatization did not exceed 2 days for bream and roach at a temperature of 20 °C and 6 days for perch at 17 °C. Before the start of the experiment and for the first 10 days of the experiment the fish were fed with oligochaetes, earthworms and daphnia, after that feeding discontinued. At the end of a 10-14 day period the giving of food was resumed. The study concludes that the experiments have shown that in the summer season the factor of starvation significantly changes the reaction to the gradient of temperature in young cyprihids - roach and bream.

Use of Freely-Available Weebly in Creating Quick and Easy Web Pages: poster presentation

Weebly is a freely-available software for creating Web pages without having to know HTML. It is easy to use, with its drag and drop editor, and offers the ability to add documents, Web links, videos, slideshows, audio, forms, polls, etc. It is hosted by Weebly and has no limits on storage space. Many templates are available for Web page design. One can publish and update almost immediately. Combined with usage of the freely-available Google Analytics, for example, it is possible to gather usage statistics. The site can be password protected, if need be. Weebly for Education is a special version for teachers and schools.

Coastal fisheries

The coastal zone of Sri Lanka is the most important area of fish production at present. This coastal zone is limited seawards to the edge of our relatively narrow continental shelf. The fishing methods employed are such that only a fraction of the shelf area is exploited. The extent to which the coastal zone is exploited depends on the craft and gear used in the fishing operations. The non-mechanized traditional crafts such as the teppams and orus generally operate within about five miles from shore. The mechanized traditional crafts and the small mechanized boats introduced around 1957 carry out fishing operations up to the continental shelf or beyond. The gear used by these fishing crafts is determined by the habits of the type of fish to be caught, the nature of the sea bed and other related conditions. For the pelagic fishes they use trolling lines or float long lines or drift nets. For the demersal fishes hand lines, bottom long lines, bottom set nets or drag nets are used. However, the net is the preferred fishing gear. The beach seines or madels, the traditional crafts such as orus, teppams and vallams and the small mechanized boats are the important contributors in the coastal fishery. Of these the madels are considered the most important since a high percentage (25-35%) of the Island's landings are produced by the operation of these nets.

Eradication of predatory fishes in fish ponds and nursery ponds using electricity

Prior to stocking economic species in tanks and nursery ponds, all the unwanted and predatory fishes in them will have to be removed. Even though most of them can be caught with ordinary gear such as cast net, drag net, scoop net etc. Total or absolute eradication is not possible and those left over are sufficient to destroy all the fingerlings introduced. Development of an electrical method for killing predatory fishes at reasonable cost is therefore, expected to provide a solution. This paper deals with a few methods, based on the use of electricity and which are suitable for different ponds.

Copper-nickel alloys for marine aquacultural engineering

Engineering developments, problems of marine corrosion, fouling and practical innovative applications of copper-nickel alloys in comparison with other materials for marine aquacultural engineering are presented. Coefficient of drag and hydrodynamic force acting on nylon and polyethylene net enclosures have shown a four-fold increase of force in four months at the Cochin harbour due to fouling. Corrosion behaviour of copper-nickel and other copper base alloys are also presented. Effects of copper additions to culture water are reviewed.

Three dimensional modeling of contaminants transportation (oil spill) in Caspian Sea

Nowadays, Caspian Sea is in focus of more attentions than past because of its individualistic as the biggest lake in the world and the existing of very large oil and gas resources within it. Very large scale of oil pollution caused by development of oil exploration and excavation activities not only make problem for coastal facilities but also make severe damage on environment. In the first stage of this research, the location and quality of oil resources in offshore and onshore have been determined and then affected depletion factors on oil spill such as evaporation, emulsification, dissolution, sedimentation and so on have been studied. In second stage, sea hydrodynamics model is offered and tested by determination of governing hydrodynamic equations on sea currents and on pollution transportation in sea surface and by finding out main parameters in these equations such as Coriolis, bottom friction, wind and etc. this model has been calculated by using cell vertex finite volume method in an unstructured mesh domain. According to checked model; sea currents of Caspian Sea in different seasons of the year have been determined and in final stage different scenarios of oil spill movement in Caspian sea on various conditions have been investigated by modeling of three dimensional oil spill movement on surface (affected by sea currents) and on depth (affected by buoyancy, drag and gravity forces) by applying main above mentioned depletion factors.