Performance of Typha australis cut at three different heights

The response of Typha australis to stem cut at three different heights was studied for four weeks. This was carried out in the field between August and September 2003. Matured Typha australis naturally occuring along the stream within the Institute Integrated Fish Pond Complex, New Bussa were randomly selected. The shoots were cut at 10cm, 20cm, and 30cm, above the soil level. The responses of the plant were assessed. Plant cut at 10cm showed re-growth for one week and later died, while those cut at 20cm and 30cm showed re-growth through out the period of experiment. Result showed previous height between 10cm and 20cm is significant (P>0.05) between 10cm and 30cm height re-growth rates. But plant cut at 20cm and 30cm showed no significant (P>0.05), in height. The results show the susceptibility of Typha australis to stem cut at 10cm or below. Typha australis cut at 10cm above soil level are not likely to survival

The Corogal: one of the big dredges in Culebra Cut, Panama Canal (ca. 1914)

Leonard Carpenter Panama Canal Collection. Photographs: Dredging, Soldiers, and Ships. [Box 1] from the Special Collections & Area Studies Department, George A. Smathers Libraries, University of Florida.

80 C 143 U.S. Aeroplane carrier "Saratoga" in Guillard Cut- Panama Canal - Feb. 7, 1928

Leonard Carpenter Panama Canal Collection. Photographs: Views of Panama and the Canal. [Box 1] from the Special Collections & Area Studies Department, George A. Smathers Libraries, University of Florida.

Biological parameters, body length-weight and length-height relationships for various species in Greek waters

Biological/fisheries parameters (L sub(oo) M, F) are presented for four fish species (Gadiculus argenteus; Gaidropsarus mediterraneous; Symphurus ligulatus; Lepidorhombus boscii) as well as body length-weight and length-height relationships for 11 and 12 fish species, respectively, estimated from trawl samples collected using three different cod-ends (stretched mesh size: 14 mm and 20 mm diamond-shaped and 20 mm square-shaped) during 1993-1994, in the western Aegean and North Euboikos Gulf, Greece. The fisheries paramaters, estimated from length-frequency using the ELEFAN approach and software, are discussed in the light of recent information on the selectivity of the presently used trawl cod-end (14 mm diamond shaped)

The cost of quinine Cinchona pubescens control on Santa Cruz Island, Galapagos

We analyse the cost of controlling the invasive quinine tree Cinchona pubescens Vahl in the highlands of Santa Cruz Island, Galapagos. Control costs in ten 400 m2 plots formed the basis for estimating the cost of control over the whole island. In the plots, densities were 2100–24,000 stems/ha (stems >150 cm tall) and 55,000–138,000 stems/ha (all size classes combined). Control involved uprooting small plants, and applying of a mix of metsulfuron methyl and picloram to cut stumps or to machete cuts in the bark of larger trees. These methods are presently used by Galapagos National Park field crews to control quinine. Costs (in man hours, herbicide and US$) were related to stem density; the density of stems summed across four height classes was a better predictor of costs than density of any one size class. Regressions (on all size classes combined) formed the basis for predictive models of costs. Costs ranged from $14 to $2225 per ha depending on stem density. The amount of herbicide (active ingredient/ha) that must be applied to high density stands of quinine is higher than typical rates of application in an agricultural setting. The cost of treating all existing plants once across quinine’s known range on Santa Cruz Island (c. 11,000 ha) was estimated at c. US$1.65 million. CDF Contribution Number 1013.

Versuche zur Verringerung des Dorschbeifanges in Grundschleppnetzen

Bottom otter trawls with cut back upper panels were tested in the fischeries on Baltic Sea flounder and North Sea plaice to reduce cod by-catch. In a first series of experiments on board the fishing research cutter “Clupea” the cod-bycatch was reduced by 63 %. The catch of flounder was by 92 % higher in the cut back trawl. The same trawl with the same experimental set-up achieved aboard the fisching research vessel “Solea” on the other hand a reduction in cod-bycatch by 69 %. The catch of flounder was 23,3 % lesser in the topless trawl, which was in contrast to the “Clupea” trials. In the second series of experiments with the same cut back trawl the splits were shortened to reduce the net opening height from 0,9 m to 0,6 m previously. The cod-bycatch was reduced by 86 % and the catch of flounder was 81 % higher in comparison to the complete trawl. A prototype made of stronger net material but based on the cutting and rigging design of the tested cut back trawl with the shortened splits was tested with commercial twin trawlers. The cod-bycatch was reduced by 82,2 %, the catch of plaice by 43,3 % and the catch of dab by 44,6 % in the comparison to the commercial used trawl TV280. The flounder catch was in the topless trawl 10 % higher. In the North Sea in the comparison to a bottom trawl TV300 the cod by-catch was reduced by 89,8 %, but the catch of plaice and dab were 54 % and 58,7 % lesser. In the next step was a prototype of a normally in the North Sea plaice fisheries used trawl tested with a cut back of 2 m only. The cod catch was reduced by 16,9 % but the plaice catch, however , by 22,3 %. Kurzfassung Schleppnetze mit verkürzten Oberblättern wurden in der Fischerei auf Ostseeflunder und Nordseescholle zur Verringerung des Dorschbeifanges erprobt. In einer ersten Versuchsserie mit dem Forschungskutter „Clupea“ wurde der Dorschbeifang um 63 % reduziert. Die Fänge der Zielart Flunder waren im reduzierten Schleppnetz dagegen um 92 % höher. Das gleiche Schleppnetz mit gleichem Versuchsaufbau erzielte auf dem Fischereiforschungsschiff „Solea“ dagegen eine Reduktion des Dorschbeifanges um 69 %, wobei im Gegensatz zu den „Clupea“-Versuchen der Flunderfang um 23,3 % im reduzierten Netz geringer war. In der zweiten Versuchsserie wurden die Netzstander am reduzierten Schleppnetz verkürzt, um die Netzöffnungshöhe zu verringern. Dadurch wurde der Dorschbeifang in Versuchen mit dem Forschungskutter „Clupea“ um 86 % verringert und die Flunderfänge waren im reduzierten Schleppnetz 81 % höher. Basierend auf dem Zuschnitt des erprobten Schleppnetzes, jedoch aus stärkerem Netzmaterial gefertigt, wurde ein Prototyp auf kommerziellen Doppelnetz-Kuttern erprobt. In der Ostsee wurde in diesen Versuchen der Dorschbeifang um 82,2 %, der Schollenfang um 43,3 % und der Klieschenfang um 44,6 % mit dem im Oberblatt verkürztem Schleppnetz im Vergleich zum Kutterschleppnetz TV280 reduziert. Der Flunderfang war im reduzierten Schleppnetz 10 % höher. Auf der Nordsee wurde mit diesem Versuchsnetz im Vergleich zu einem TV 300 der Kabeljaubeifang um 89,8 % verringert, die Schollenfänge waren jedoch 54 % geringer und die Klieschenfänge 58,7 % geringer als im Vergleichsnetz. In einer weiteren Variante wurde ein in der Nordseeschollenfischerei verwendetes Grundschleppnetz mit 2 m geringfügig im Oberblatt zurückgeschnitten und mit dem Prototyp auf einem Doppelnetz-Heckschlepper verglichen. Der Kabeljaubeifang wurde dadurch um 16,9 % der Schollenfang aber um 22,3 % verringert

Topic 1. Some steric-height features of the water off the Pacific coast of Canada; Topic 2. Possible warming of the water at station P in the northeast Pacific during 1956-1984 [abstract]

TOPIC 1: In terms of seasonal scale, temperature effect dominates the annual change of steric height in the open ocean whereas salinity effect controls it along the continental shelf. Large portion of the annual change of height relative to the 1000-db surface is contained in the upper 100m layer. However, in interannual scale large anomalies of steric height in the open ocean, are more often than not, caused by halosteric rather than thermosteric effect. At least in the open ocean the heights are almost totally determined by the behavior of deep water. Their interannual variability appears to be related to the cumulative effect of Eckman pumping. TOPIC 2: There is a "trend" that over the past 28 years the water at Station P has warmed. Least-square analysis indicates that this warming may be significant but shortening of the time-series data by approximately 10 years fails to show that this is the case. These "trends" have to be interpreted with care. The warming may be "apparent" in that it is not indicated clearly in the deep isopynal surfaces which, during the above period, have deepened. Thus warming at the isobaric surfaces may be the effect of the downward migration of the isopynal surfaces.

Boat wakes and their influence on erosion in the Atlantic Intracoastal Waterway, North Carolina

Boat wakes in the Atlantic Intracoastal Waterway (AIWW) of North Carolina occur in environments not normally subjected to (wind) wave events, making sections of AIWW potentially vulnerable to extreme wave events generated by boat wakes. The Snow’s Cut area that links the Cape Fear River to the AIWW is an area identified by the Wilmington District of the U.S. Army Corps of Engineers as having significant erosion issues; it was hypothesized that this erosion could be being exacerbated by boat wakes. We compared the boat wakes for six combinations of boat length and speed with the top 5% wind events. We also computed the benthic shear stress associated with boat wakes and whether sediment would move (erode) under those conditions. Finally, we compared the transit time across Snow’s Cut for each speed. We focused on two size classes of V-hulled boats (7 and 16m) representative of AIWW traffic and on three boat speeds (3, 10 and 20 knots). We found that at 10 knots when the boat was plowing and not yet on plane, boat wake height and potential erosion was greatest. Wakes and forecast erosion were slightly mitigated at higher, planing speeds. Vessel speeds greater than 7 knots were forecast to generate wakes and sediment movement zones greatly exceeding that arising from natural wind events. We posit that vessels larger than 7m in length transiting Snow’s Cut (and likely many other fetch-restricted areas of the AIWW) frequently generate wakes of heights that result in sediment movement over large extents of the AIWW nearshore area, substantially in exceedance of natural wind wave events. If the speed, particularly of large V-hulled vessels (here represented by the 16m length class), were reduced to pre-plowing levels (~ 7 knots down from 20), transit times for Snow’s Cut would be increased approximately 10 minutes but based on our simulations would likely substantially reduce the creation of erosion-generating boat wakes. It is likely that boat wakes significantly exceed wind wave background for much of the AIWW and similar analyses may be useful in identifying management options.

On the relative utility of different methods to increase the vertical height in an otter trawl

Comparative fishing experiments to study the relative utility of different methods for increased vertical spread of bottom trawl and the availability of off bottom fishes in the region were made using gussets, kite, separate float line and side panels on a two seam net. The catch rates as well as composition of fish were studied. The opening of the trawl mouth, both horizontally and vertically, under different operating gears and towing tension on warps were measured and estimated for comparison purposes. Better catch rate with good quality fishes was obtained with the gear operated with separate float line. With kite, the vertical spread was increased with less catch indicating poor concentration of off bottom fishes.

Height-depth (breadth) relationship of shells in the backwater oyster Crassostrea madrasensin (Preston) of the Cochin harbour

A study of the height-depth relation in the Indian backwater oyster Crassostrea madrasensis (Preston) was carried out. The plot of height against depth showed an exponential trend and a relationship of the form H = ADB. Plot of height against depth also showed larger deviations in height for oysters with greater depth. Analysis showed that variations in height do not result in corresponding variations in depth, particularly in oysters with increased height.

Height-length relation of shells in the Indian backwater oyster Crassostrea madrasensis (Preston) of the Cochin harbour

Height-length relationship in Crassostrea madrasensis (Preston) showed an exponential trend and relation in the form, H=ALᴮ. Deviations of actual values from the mean values consequent to the increase in size were noticed. Height and length approximated in oysters of less than 3.5cm in height resulting in orbicular shape. In oyster of shell height 3.5cm to 8cm, increase in height is faster leading to an oval shape. Above 8cm in height, the oysters become further elongated. Height-length relation is non-linear with an index (B value) of 1.1156. A linear relationship also holds good as the B value is not very much different from unity (H=-2.5424+2.0036L).

Survey of biosystematic and sexual reproductive physiology in Holothuroidea on Hormozgan Province

Sea cucumbers belong to phylum Echinodermata, order Holothuroidea are an abundant and diverse group of Invertebrates, with over 1400 species occuring from the intertidal to the deepest oceanic trenches. Sea cucumbers are important components of the food chain in temperate and coral reef ecosystems and they play an important role as deposite feeders and suspension feeders. Rapid decline in populations may have serious consequences for the survival of other species that are part of the same complex food web,as the eggs, larve and juveniles constitute an important food source for the other marine species including crustaceans, fish and mollusks. In addition sea cucumbers are often called the earthworms of the sea, because they are responsible for the extensive shifting and mixing of the substrate, and recycling of detrital matter. Sea cucumbers consume and grind sediment and organic material into finer particles , turning over the top layers of sediment in lagoons , reefs and other habitats and allowing the penetration of oxygen. While the taxonomy of the holothurian families is generally well known , the distinction of similar species is difficult. There are relatively few holothurian taxonomist.Most sea cucumber species can be identified by Holothurin taxonomists by using the calcareous skeletal ossicles found in the body wall. In this study , at first a sea cucumber from Kish island in Persian gulf has recognized. Individuals collected from west and east extend far away into north and south of coral reefs by diving. I have checked them morphologically and anatomically.Then with key to the orders of the Holothuroidea, They belong to the Aspidochirotida with key to the families of Aspidochirotida, they were in Stichopodidae families and with key to the genus of Stchopodidae, they were Stichopus. Then ossicles were extracted at National Museum of Natural History, by Dr David Pawson. The ossicles were measured on a transect across a slide prepared from the mid-dorsal region of each specimen.The one we have in the shallow waters of Kish island, is Stichopus hermanni, a massive holothurian, body broad, considerably flattened ventraly ,the dorsal side slightly arched and the lateral sides almost vertical; body wall fairy thick and soft ; mouth subterminal; anus central; tentacles usually 20 in number of length and leaf shaped. Numerous ossicles consisting of table with large discs having usually 7 to 15 peripheral holes, but often irregular or incomplete and spire of moderate height ending in a group of spinelets, rosettes of variable development, and c-shaped rods. Color (exept papillae)partly remained after preservation in alcohol which is found at the depth of 4 to 8 meters, on coral reef. Furthermore, the sexual reproductive cycle was described using standard methods. Gonads were removed and transferred to Bouin's fixative for four weeks and then processed according to standard embedding technique. To prevent the loss of tubule contents during embedding, the tubule sections, were cut well beyond the segment selected for sectioning. For each individual, six sections, each section with 5µm diameter by microtome were cut from tubules. These sections were first placed on gelatin coated slides (the gelatin was heated to 42°c) and then transferred to the oven at 37°c for one hour. This technique usually prevents the fragil tubules from breaking and the loss of gametes. The slides were stained with Eosin and Hematoxylin, and good resolution of the various cell types achieved.A second series of slides was stained with the Periodic Acid Schiff(PAS) to identify polysaccharides(glycogen). Monthly sampling was occurred.The sexual reproductive cycle was defined through the combined use of these criteria: Monthly percentages of the gonad stages for each sex, the monthly gonad index (GI) , given as the ratio of the wet gonad weight (G) to the dray weight (DW)and the monthly percentage of individuals that undetermined sex. The gonad consists of two tufts of tubules on which saccules develop. Gonadal development was classified into five stages: post spawning, recovery, growth, advanced growth, and mature stage that were adapted from the earlier studies of holothurians. Histological preparations showed that the sex of larger individuals could be identified by the presence of oogonia and young oocytes in females, and spermatogonic stages in males.The mean diameter of the tubules and gonadal mass follow annual cycles, increasing from late winter through spring, and dropping abruptly after spawning in the summer. Gametogenesis is generally a prolongate process and begins in March. By summer the ovarian tubules contain oocytes with diameter of 120-240 pm and the testicular tubules contain an abundance of spermatozoa (diameter 5-6 gm ).Following spawning the predominant activity within the spent tubules is phagocytosis of the residual gamets.The active phase of gametogenesis (March to July), coincides with an increasing photoperiod regim, and an accelerated gametogenesis occurs in July when temperature is high. Throughout the year, the gonad of Stichopus hermanni is larger in males than in females, and this is due to the number of tubules in the testis rather than to tubules length or diameter.