Utilization of prawn waste: isolation of chitin and its conversion to chitosan

process is described for the preparation of chitosan from prawn waste. The process involves extraction of protein using 0.5% sodium hydroxide solution, bleaching the protein free mass with bleach liquor containing 0.3-0.5% available chlorine followed by demineralisation with 1.25 N hydrochloric acid in the cold and deacetylation using 1:1 (w/w) sodium hydroxide solution at 100°C for 2 hours.

Chitosan from Squilla

Squilla (Oratosquilla nepa) is abundant along the west coast of India, inhabiting burrows in sand and mud. The species is little used as it possesses little meat. There is great similarity between chemical composition of Squilla and prawn waste, and it is suggested that Squilla could therefore be used for making chitosan, a potential industrial chemical with various uses. Preparation of chitosan, and the general nature of the prepared product, is described.

Chitosan as a water clarifying agent

Chitosan may be used to reduce the bacterial load of water. Material prepared according to the method of Radhakrishnan & Prahu described in Res. & Ind., 16(4), pp. 265, used in 1% solution in 1% acetic acid was added at 10 ppm level to contaminated water and allowed to stand for 45 min. Cultures of E. coli, Staphylococci and a mixture of the 2 were inoculated into ordinary and muddy water. Bacterial load was determined, and it is shown that chitosan has excellent qualities as a coagulant/water clarifying agent, especially for muddy waters or those contaminated with suspended matter or bacteria.

Chitosan for removal of mercury from water

Chitosan from prawn waste was used for the removal of mercury from solutions. Mercuric chloride solutions containing 250, 500, 1000, 10000 and 100000 ng of Hg super(+2)/ml were treated with chitosan samples of different particle size for different periods. The effect of initial concentration of mercury in the solution, particle size of chitosan and time of treatment on the adsorption of Hg super(+2) was studied. The residual mercury content after treatment for ten min. with chitosan of 40 mesh size from a solution of initial concentration 10000 ng/ml was 10 ng/ml whereas it was 50 ng/ml for chitosan of larger particle size (10-20 mesh). From solutions of lower concentrations complete removal of mercury was possible by chitosan treatment. Though the particle size and time of treatment have significant effect, the concentration of mercury in solution is more influential on the removal of mercury from solution.

Application of chitosan loaded with metal oxide nano particles to remove lead present from sea water

Chitosan is a natural polymer obtained by deacetylation of chitin. After cellulose chitin is the second most abundant polysaccharide in nature. It is biologically safe, non-toxic, biocompatible and biodegradable polysaccharide. Chitosan loaded with zinc oxide nanoparticles have gained more attention bio sorbent because of their better stability, low toxicity, simple and mild preparation method and high sorption capacity. Chitosan loaded with zinc oxide nanoparticles have been prepared of chitosan. The physicochemical properties of nanoparticles were characterized by Fourier Transform Infrared (FTIR), Scanning Electron Microscope (SEM) Analysis. Its sorption capacity for lead and cadmium ions studied. Factors such as initial concentration of lead ions, cadmium ions sorbent amount, contact time, pH and temperature were investigated. It is found that chitosan loaded with zinc oxide nanoparticles could sorb lead and cadmium ions effectively, this sorption rate was affected significantly by initial concentration of lead and cadmium ions, sorbent amount, contact time, pH of solution. The maximum of percentage of lead sorption was 98 % with initial concentration 3 mg/l and sorbent amount 0.05 g, pH 11 in 45 min and cadmiumwas90 %with initial concentration 3mg/l and sorbent amount 0.05 g, pH 11 in45 min. Consequently chitosan loaded with zinc oxide nanoparticles demonstrated greater fixation ability for lead ions than cadmium ions.

Study of physicochemical, microbial and sensory properties of surimi produced from black mouth croaker (Atrobucca nibe) at freezing condition (-18ºC)

Black mouth croaker (Atrobucca nibe) is considered as a new valuable fish stock in the Oman Sea. In this study, surimi was manufactured from nonmarket size of the fish, manually and different cryoprotectant agents were added to the surimi. Finally changes in physiochemical, microbiological and sensory quality, characteristics of the surimi and kamaboko gel samples were assessed during 6 months at freezing storage (-18ºC). Surimi samples with the addition of Iranian tragacanth gum (TG), xanthan gum (XG), chitosan (CS) and whey protein concentrate (WPC) at 1% (w/w) were prepared to evaluate their impacts as a cryoprotectant on the surimi, individually. The results showed that the whiteness and lightness indexes in all surimi samples were gradually decreased during frozen storage. This trend of decreasing was more intensity in the control sample from 61.08±0.131 to 54.21±0.067 was recorded (p<0.05). Water holding capacity (WHC) in all treatments was decreased during 6 months. The lowest WHC (g/g) was obtained in the surimi without cryoprotectants and maximum WHC was measured in Tcs and Twpc samples, respectively (p<0.05). The lowest breaking force was calculated in Txg (166.00±22.627 g) and Tc (271.50±263.16 g) during 6 months at frozen storage, respectively (p<0.05), while Twpc treatment with slight variations showed the highest breaking force (p<0.05). Also, the lowest gel strength was obtained in Txg (68.22±6.740 g.cm) after 6 month of frozen storage (p<0.05). All Kamaboko surimi gels texture profile analysis parameters decreaced with increasing shelf life. This decreasing trend in the control sample was more severe. Floding results were reduced in all samples during storage (p<0.05). The best protective results probably were obtained in WPC, chitosan and commercial cryoprotectant agents, respectively due to protein stabilization of myofibrillar proteins and the protein-protein network structure, leading to the formation of surimi gel with strong textural properties during frozen conditions. The average number of surimi polygonal structures were significantly decreased (number per mm2) and their area were significantly increased (μm2) in all treatments (p<0.05). With increasing storage time, moisture, protein contents and pH were decreaced. Maximun TVB-N index was calculated in Tc (7.93±0.400 mg/100g) and Txg (7.88±0.477), respectively (p<0.05). TBRAs index was increased in all treatments during frozen storage, while this trend was reached in maximum value in Tc (p<0.05). Sensory evaluation of the fish finger quality characteristics (color, odor, texture and overall acceptability) preapare from frozen black mouth croaker surimi was decreaced during 6 month frozen storage. After the period of frozen storage the highest quality scores were measured in Twpc, Tcs and Tcc samples, respectively (p<0.05). In this study, coliform bacteria were not found in all treatments during frozen storage. The surimi sample containing chitosan showed lower mesophilic and psychrotropic bacteria (log cfu/g) than other treatments during frozen storage (p<0.05). Salt-soluble proteins extractions of all treatments were decreased during frozen storage. This decreacing trend was highest in Tcs (45.74±0.176%) and lowest in Tc treatments after 6 month of frozen storage (29.92±0.224%) (p<0.05). Although commercial cryoprotectant agents were successful in limiting the denaturation of proteins but sugar contents were not accepted for diabetics or those who disagree with the sweet taste and high calorie food. Hence, commercial cryoprotectant agents can be replaced with whey protein concentrate and chitosan at 1% level (w/w) consider that they were showed proper protection of the surimi myofibrillar proteins during storage.

Cloning and expression of zebra fish ferroportin and investigating its influence on anemia

Iron is required for many microbes and pathogens for their survival and proliferation including Leishmania which cause leishmaniasis. Leishmaniasis is an increasingly serious infectious disease with a wide spectrum of clinical manifestations. These range from localized cutaneous leishmaniasis (CL) lesions to a lethal visceral form. Certain strains such as BALB/c mice fail to control L. major infection and develop progressive lesions and systemic disease. These mice are thought to be a model of non-healing forms of the human disease such as kala-azar or diffuse cutaneous leishmaniasis. Progression of disease in BALB/c mice has been associated with the anemia, in last days of their survival, the progressive anemia is considered to be one of the reasons of their death. Ferroportin (Fpn), a key regulator of iron homeostasis is a conserved membrane protein that exports iron across the duodenal enterocytes as well as macrophages and hepatocytes into the blood circulation. Fpn has also critical influence on survival and proliferation of many microorganisms whose growth is dependent upon iron, thus preparation of Fpn is needed to study the role of iron in immune responses and pathogenesis of micoorganisms. To prepare and characterize a recombinant ferroportin, total RNA was extracted from Indian zebrafish duodenum, and used to synthesize cDNA by RT-PCR. PCR product was first cloned in Topo TA vector and then subcloned into the GFP expression vector pEGFP–N1. The final resulted plasmid (pEGFP-ZFpn) was used for expression of FPN-EGFP protein in Hek 293T cells. The expression was confirmed by fluorescence microscopy and flow cytometery. Recombinant Fpn was further characterized by submission of its predicted amino acid sequences to the TMHMM V2.0 prediction server (hidden Markov model), NetOGlyc 3.1 server and NetNGlyc 3.1 server. Data emphasised that obtained Fpn from indian zebrafish contained eight transmembrane domains with N- and C-termini inside the cytoplasm and harboured 78 mucin-type glycosylated amino acid. The results indicate that the prepared and characterized recombinant Fpn protein has no membrane topology difference compared to other Fpn described by other researcher. Our next aim was to deliver recombinant plasmid (pEGFP-ZFpn) to entrocyte cells. However, naked therapeutic genes are rapidly degraded by nucleases, showing poor cellular uptake, nonspecificity to the target cells, and low transfection efficiency. The development of safe and efficient gene carriers is one of the prerequisites for the success of gene therapy. Chitosan and alginate 139 polymers were used for oral gene carrier because of their biodegradability, biocompatibility and their mucoadhesive and permeability-enhancing properties in the gut. Nanoparticles comprising Alginate/Chitosan polymers were prepared by pregel preparation method. The resulting nanoparticles had a loading efficiency of 95% and average size of 188 nm as confirmed by PCS method and SEM images had showed spherical particles. BALB/c mice were divided to three groups. The first and second group were fed with chitosan/alginate nanoparticles containing the pEGFP-ZFpn and pEGFP plasmid, respectively (30 μgr/mice) and the third group (control) didn’t get any nanoparticles. The result showed BALB/c mice infected by L.major, resulted in higher hematocryte and iron level in pEGFP-ZFpn fed mice than that in other groups. Consentration of cytokines determined by ELISA showed lower levels of IL-4 and IL-10 and higher levels of IFN-γ/IL-4 and IFN-γ/IL-10 ratios in pEGFP-ZFpn fed mice than that in other groups. Morover more limited increase of footpad thickness and significant reduction of viable parasites in lymph node was seen in pEGFP-ZFpn fed mice. The results showed the first group exhibited a highr hematocryte and iron compared to the other groups. These data strongly suggests the in vivo administration of chitosan/alginate nanoparticles containing pEGFP-ZFpn suppress Th2 response and may be used to control the leishmaniasis .