Hydroacoustic surveys: a non-destructive approach to monitoring fish distributions at National Marine Sanctuaries

The science of fisheries acoustics and its applicability to resource management have evolved over the past several decades. This document provides a basic description of fisheries acoustics and recommendations on using this technology for research and monitoring of fish distributions and habitats within sanctuaries. It also describes recent efforts aimed at applying fisheries acoustics to Gray’s Reef National Marine Sanctuary (GRNMS) (Figure 1). Historically, methods to assess the underwater environment have included net trawls, diver censuses, hook and line, video, sonar and other techniques deployed in a variety of ways. Fisheries acoustics, using active sonar, relies on the physics of sound traveling through water to quantify the distribution of biota in the water column. By sending a signal of a given frequency through the water column and recording the time of travel and the strength of the reflected signal, it is possible to determine the size and location of fish and estimate biomass from the acoustic backscatter. As a fisheries assessment tool, active hydroacoustics technology is an efficient, non-intrusive method of mapping the water column at a very fine spatial and temporal resolution. It provides a practical alternative to bottom and mid-water trawls, which are not allowed at GRNMS. Passive acoustics, which uses underwater hydrophones to record man-made and natural sounds such as fish spawning calls and sounds produced by marine mammals for communication and echolocation, can provide a useful, complementary survey tool. This report primarily deals with active acoustics, although the integration of active and passive acoustics is addressed as well. (PDF contains 32 pages)

Olympic Coast National Marine Sanctuary Habitat Mapping: Survey report and classification of side scan sonar data from surveys HMPR-114-2004-02 and HMPR-116-2005-01.

The Olympic Coast National Marine Sanctuary (OCNMS) continues to invest significant resources into seafloor mapping activities along Washington’s outer coast (Intelmann and Cochrane 2006; Intelmann et al. 2006; Intelmann 2006). Results from these annual mapping efforts offer a snapshot of current ground conditions, help to guide research and management activities, and provide a baseline for assessing the impacts of various threats to important habitat. During the months of August 2004 and May and July 2005, we used side scan sonar to image several regions of the sea floor in the northern OCNMS, and the data were mosaicked at 1-meter pixel resolution. Video from a towed camera sled, bathymetry data, sedimentary samples and side scan sonar mapping were integrated to describe geological and biological aspects of habitat. Polygon features were created and attributed with a hierarchical deep-water marine benthic classification scheme (Greene et al. 1999). For three small areas that were mapped with both side scan sonar and multibeam echosounder, we made a comparison of output from the classified images indicating little difference in results between the two methods. With these considerations, backscatter derived from multibeam bathymetry is currently a costefficient and safe method for seabed imaging in the shallow (<30 meters) rocky waters of OCNMS. The image quality is sufficient for classification purposes, the associated depths provide further descriptive value and risks to gear are minimized. In shallow waters (<30 meters) which do not have a high incidence of dangerous rock pinnacles, a towed multi-beam side scan sonar could provide a better option for obtaining seafloor imagery due to the high rate of acquisition speed and high image quality, however the high probability of losing or damaging such a costly system when deployed as a towed configuration in the extremely rugose nearshore zones within OCNMS is a financially risky proposition. The development of newer technologies such as intereferometric multibeam systems and bathymetric side scan systems could also provide great potential for mapping these nearshore rocky areas as they allow for high speed data acquisition, produce precisely geo-referenced side scan imagery to bathymetry, and do not experience the angular depth dependency associated with multibeam echosounders allowing larger range scales to be used in shallower water. As such, further investigation of these systems is needed to assess their efficiency and utility in these environments compared to traditional side scan sonar and multibeam bathymetry. (PDF contains 43 pages.)

Hydroacoustic evaluation of spawning red hind (Epinephelus guttatus) aggregations along the coast of Puerto Rico in 2002 and 2003

Red hind (Epinephelus guttatus) have been overfished in the Caribbean and were included with seven other regional grouper species deemed vulnerable to risk of extinction. The Puerto Rico Department of Natural and Environmental Resources desired to map spawning red hind aggregations within commonwealth waters as part of their resource management program for the species. Mobile hydroacoustic surveys were conducted over 3-day periods in 2002 and 2003, indexed to the full moon phase in February or March when red hind were known to aggregate. Four vessels concurrently sampled the southwest, south, and southeast coasts of Puerto Rico in 2002. In 2003, three vessels conducted complementary surveys of the northwest, north, and northeast coasts of the island, completing a circuit of the coastal shelf-spawning habitat. These surveys indicated that red hind spawning aggregations were prevalent along the south and west coasts, and sparse along the north coast during the survey periods. Highest spawning red hind concentrations were observed in three areas offshore of the west coast of Puerto Rico, around Mona and Desecheo islands (20,443 and 10,559 fish/km2, respectively) and in the Bajo de Cico seasonal closed area (4,544 fish/km2). Following both 2002 and 2003 surveys, a series of controlled acoustic measurements of known local fish species in net pens were conducted to assess the mean target strength (acoustic backscatter) of each group. Ten species of fish were measured, including red hind (E. guttatus), coney (E. fulvus), white grunt (Haemulon plumieri), pluma (Calamus pennatula), blue tang (Acanthurus coeruleus), squirrel fish (Holocentrus spp.), black durgeon (Melichtyhs niger), ocean file fish (Canthidermis sufflamen), ocean surgeon fish (Acanthurus bahianus), and butter grouper (Mycteroperca spp.). In general, the mean target strength results from the caged fish experiments were in agreement with published target strength length relationships, with the exception of white grunt and pluma.

BotCam: a baited camera system for nonextractive monitoring of bottomfish species

A stereo-video baited camera system (BotCam) has been developed as a fishery-independent tool to monitor and study deepwater fish species and their habitat. During testing, BotCam was deployed primarily in water depths between 100 and 300 m for an assessment of its use in monitoring and studying Hawaiian bottomfish species. Details of the video analyses and data from the pilot study with BotCam in Hawai`i are presented. Multibeam bathymetry and backscatter data were used to delineate bottomfish habitat strata, and a stratified random sampling design was used for BotCam deployment locations. Video data were analyzed to assess relative fish abundance and to measure f ish size composition. Results corroborate published depth ranges and zones of the target species, as well as their habitat preferences. The results indicate that BotCam is a promising tool for monitoring and studying demersal fish populations associated with deepwater habitats to a depth of 300 m, at mesohabitat scales. BotCam is a flexible, nonextractive, and economical means to better understand deepwater ecosystems and improve science-based ecosystem approaches to management.

Evaluation of rockfish abundance in untrawlable habitat: combining acoustic and complementary sampling tools

Rockfishes (Sebastes spp.) are an important component of North Pacific marine ecosystems and commercial fisheries. Because the rocky, high-relief substrate that rockfishes often inhabit is inaccessible to standard survey trawls, population abundance assessments for many rockfish species are difficult. As part of a large study to classify substrate and compare complementary sampling tools, we investigated the feasibility of using an acoustic survey in conjunction with a lowered stereo-video camera, a remotely operated vehicle, and a modified bottom trawl to estimate rockfish biomass in untrawlable habitat. The Snakehead Bank south of Kodiak Island, Alaska, was surveyed repeatedly over 4 days and nights. Dusky rockfish (S. variabilis), northern rockfish (S. polyspinis), and harlequin rockfish (S. variegatus) were the most abundant species observed on the bank. Backscatter attributed to rockfish were collected primarily near the seafloor at a mean height off the bottom of 1.5 m. Total rockfish backscatter and the height of backscatter off the bottom did not differ among survey passes or between night and day. Biomass estimates for the 41 square nautical-mile area surveyed on this small, predominantly untrawlable bank were 2350 metric tons (t) of dusky rockfish, 331 t of northern rockfish, and 137 t of harlequin rockfish. These biomass estimates are 5–60 times the density estimated for these rockfish species by a regularly conducted bottom trawl survey covering the bank and the surrounding shelf. This finding shows that bottom trawl surveys can underestimate the abundance of rockfishes in untrawlable areas and, therefore, may underestimate overall population abundance for these species.

Application of an acoustic–trawl survey design to improve estimates of rockfish biomass

Biomass estimates of several species of Alaskan rockfishes exhibit large interannual variations. Because rockfishes are long lived and relatively slow growing, large, short-term shifts in population abundance are not likely. We attribute the variations in biomass estimates to the high variability in the spatial distribution of rockfishes that is not well accounted for by the survey design currently used. We evaluated the performance of an experimental survey design, the Trawl and Acoustic Presence/Absence Survey (TAPAS), to reduce the variability in estimated biomass for Pacific ocean perch (Sebastes alutus). Analysis of archived acoustic backscatter data produced an acoustic threshold for delineating potential areas of high (“patch”) and low (“background”) catch per unit of effort (CPUE) in real time. In 2009, we conducted a 12-day TAPAS near Yakutat, Alaska. We completed 59 trawls at 19 patch stations and 40 background stations. The design performed well logistically, and Pacific ocean perch (POP) accounted for 55% of the 31 metric tons (t) of the catch from this survey. The resulting estimates of rockfish biomass were slightly less precise than estimates from simple random sampling. This difference in precision was due to the weak relationship of CPUE to mean volume backscattering and the relatively low variability of POP CPUE encountered. When the data were re-analyzed with a higher acoustic threshold than the one used in the field study, performance was slightly better with this revised design than with the original field design. The TAPAS design could be made more effective by establishing a stronger link between acoustic backscatter and CPUE and by deriving an acoustic threshold that allows better identification of backscatter as that from the target species.

Seabed classification for trawlability determined with a multibeam echo sounder on Snakehead Bank in the Gulf of Alaska

Rockfishes (Sebastes spp.) tend to aggregate near rocky, cobble, or generally rugged areas that are difficult to survey with bottom trawls, and evidence indicates that assemblages of rockfish species may differ between areas accessible to trawling and those areas that are not. Consequently, it is important to determine grounds that are trawlable or untrawlable so that the areas where trawl survey results should be applied are accurately identified. To this end, we used multibeam echosounder data to generate metrics that describe the seafloor: backscatter strength at normal and oblique incidence angles, the variation of the angle-dependent backscatter strength within 10° of normal incidence, the scintillation of the acoustic intensity scattered from the seafloor, and the seafloor rugosity. We used these metrics to develop a binary classification scheme to estimate where the seafloor is expected to be trawlable. The multibeam echosounder data were verified through analyses of video and still images collected with a stereo drop camera and a remotely operated vehicle in a study at Snakehead Bank, ~100 km south of Kodiak Island in the Gulf of Alaska. Comparisons of different combinations of metrics derived from the multibeam data indicated that the oblique-incidence backscatter strength was the most accurate estimator of trawlability at Snakehead Bank and that the addition of other metrics provided only marginal improvements. If successful on a wider scale in the Gulf of Alaska, this acoustic remote-sensing technique, or a similar one, could help improve the accuracy of rockfish stock assessments.

Establishing species–habitat associations for 4 eteline snappers with the use of a baited stereo-video camera system

With the use of a baited stereo-video camera system, this study semiquantitatively defined the habitat associations of 4 species of Lutjanidae: Opakapaka (Pristipomoides filamentosus), Kalekale (P. sieboldii), Onaga (Etelis coruscans), and Ehu (E. carbunculus). Fish abundance and length data from 6 locations in the main Hawaiian Islands were evaluated for species-specific and size-specific differences between regions and habitat types. Multibeam bathymetry and backscatter were used to classify habitats into 4 types on the basis of substrate (hard or soft) and slope (high or low). Depth was a major influence on bottomfish distributions. Opakapaka occurred at depths shallower than the depths at which other species were observed, and this species showed an ontogenetic shift to deeper water with increasing size. Opakapaka and Ehu had an overall preference for hard substrate with low slope (hard-low), and Onaga was found over both hard-low and hard-high habitats. No significant habitat preferences were recorded for Kalekale. Opakapaka, Kalekale, and Onaga exhibited size-related shifts with habitat type. A move into hard-high environments with increasing size was evident for Opakapaka and Kalekale. Onaga was seen predominantly in hard-low habitats at smaller sizes and in either hard-low or hard-high at larger sizes. These ontogenetic habitat shifts could be driven by reproductive triggers because they roughly coincided with the length at sexual maturity of each species. However, further studies are required to determine causality. No ontogenetic shifts were seen for Ehu, but only a limited number of juveniles were observed. Regional variations in abundance and length were also found and could be related to fishing pressure or large-scale habitat features.

Integration of fisheries acoustics surveys and bathymetric mapping to characterize midwater-seafloor habitats of US Virgin Islands and Puerto Rico (2008-2010)

NOAA’s Coral Reef Conservation program (CRCP) develops coral reef management priorities by bringing together various partners to better understand threats to coral reef ecosystems with the goal of conserving, protecting and restoring these resources. Place-based and ecosystem-based management approaches employed by CRCP require that spatially explicit information about benthic habitats and fish utilization are available to characterize coral reef ecosystems and set conservation priorities. To accomplish this, seafloor habitat mapping of coral reefs around the U.S. Virgin Islands (USVI) and Puerto Rico has been ongoing since 2004. In 2008, fishery acoustics surveys were added to NOAA survey missions in the USVI and Puerto Rico to assess fish distribution and abundance in relation to benthic habitats in high priority conservation areas. NOAA’s National Centers for Coastal Ocean Science (NCCOS) have developed fisheries acoustics survey capabilities onboard the NOAA ship Nancy Foster to complement the CRCP seafloor habitat mapping effort spearheaded by the Center for Coastal Monitoring and Assessment Biogeography Branch (CCMA-BB). The integration of these activities has evolved on the Nancy Foster over the three years summarized in this report. A strategy for improved operations and products has emerged over that time. Not only has the concurrent operation of multibeam and fisheries acoustics surveys been beneficial in terms of optimizing ship time and resources, this joint effort has advanced an integrated approach to characterizing bottom and mid-water habitats and the fishes associated with them. CCMA conducts multibeam surveys to systematically map and characterize coral reef ecosystems, resulting in products such as high resolution bathymetric maps, backscatter information, and benthic habitat classification maps. These products focus on benthic features and live bottom habitats associated with them. NCCOS Centers (the Center for Coastal Fisheries and Habitat Research and the Center for Coastal Environmental Health and Biomolecular Research) characterize coral reef ecosystems by using fisheries acoustics methods to capture biological information through the entire water column. Spatially-explicit information on marine resources derived from fisheries acoustics surveys, such as maps of fish density, supports marine spatial planning strategies and decision making by providing a biological metric for evaluating coral reef ecosystems and assessing impacts from pollution, fishing pressure, and climate change. Data from fisheries acoustics surveys address management needs by providing a measure of biomass in management areas, detecting spatial and temporal responses in distribution relative to natural and anthropogenic impacts, and identifying hotspots that support high fish abundance or fish aggregations. Fisheries acoustics surveys conducted alongside multibeam mapping efforts inherently couple water column data with information on benthic habitats and provide information on the heterogeneity of both benthic habitats and biota in the water column. Building on this information serves to inform resource managers regarding how fishes are organized around habitat structure and the scale at which these relationships are important. Where resource managers require place-based assessments regarding the location of critical habitats along with high abundances of fish, concurrent multibeam and fisheries acoustics surveys serve as an important tool for characterizing and prioritizing coral reef ecosystems. This report summarizes the evolution of fisheries acoustics surveys onboard the NOAA ship Nancy Foster from 2008 to 2010, in conjunction with multibeam data collection, aimed at characterizing benthic and mid-water habitats in high priority conservation areas around the USVI and Puerto Rico. It also serves as a resource for the continued development of consistent data products derived from acoustic surveys. By focusing on the activities of 2010, this report highlights the progress made to date and illustrates the potential application of fisheries data derived from acoustic surveys to the management of coral reef ecosystems.

Integration of submersible transect data and high-resolution multibeam sonar imagery for a habitat-based groundfish assessment of Heceta Bank, Oregon

In the face of dramatic declines in groundfish populations and a lack of sufficient stock assessment information, a need has arisen for new methods of assessing groundfish populations. We describe the integration of seafloor transect data gathered by a manned submersible with high-resolution sonar imagery to produce a habitat-based stock assessment system for groundfish. The data sets used in this study were collected from Heceta Bank, Oregon, and were derived from 42 submersible dives (1988–90) and a multibeam sonar survey (1998). The submersible habitat survey investigated seafloor topography and groundfish abundance along 30-minute transects over six predetermined stations and found a statistical relationship between habitat variability and groundfish distribution and abundance. These transects were analyzed in a geographic information system (GIS) by using dynamic segmentation to display changes in habitat along the transects. We used the submersible data to extrapolate fish abundance within uniform habitat patches over broad areas of the bank by means of a habitat classification based on the sonar imagery. After applying a navigation correction to the submersible-based habitat segments, a good correlation with major boundaries on the backscatter and topographic boundaries on the imagery were apparent. Extrapolation of the extent of uniform habitats was made in the vicinity of the dive stations and a preliminary stock assessment of several species of demersal fish was calculated. Such a habitat-based approach will allow researchers to characterize marine communities over large areas of the seafloor.