Drying of fish--factors to consider

Although one of the best possibilities for raising the animal protein of the diets of Nigerian is to increase the consumption of fish; particularly through the use of several methods of long term preservation techniques, such as drying, no radical approach has yet emerged. Although, a great deal of the artisanal fish catch is dried for the huge consumer and distant markets, the traditional methods of fish preservation need improvements to cope with demand for increased quantity, shelf-stable, and improved quality of fish products. The paper discusses drying requirements, heat and mass transfer, consumer acceptance, fuel sources, storage and marketing of dried fish products; and suggest ways and means of structurally transforming the artisanal technology of fish drying

Effects of different types of drying on the nutritive value of proteins in the fishmeals

A comparative study on the effect of different types of drying on the nutritive value of the proteins in the different fishmeals of known history was made. From the observations, it is clear that the mode of drying has got little or no effect on the nutritive value of the meal as revealed by the chemical indices of available lysine and pepsin digestibility, provided enough precautions were taken to avoid scorching during drying process. Sun dried meals are in no way inferior to the meals prepared by hot-air, steam or vacuum drying.

An accelerated method of hot air drying of fish

The effects of temperature and relative humidity on the rate of drying of split open fish and salted fish in a tunnel dryer have been studied at a constant air velocity. By a judicious combination of these two, the rate of drying could be considerably accelerated, 10 to 12 hours only being required for drying to moisture levels below 30% in the case of mackerel, lactarius, otolithes and kilimeen (Nemipterus japonicus)

Reproductive biology of freshwater crab, Paratelphusa spinigera, Wood Mason (Crustacea-Decapoda)

This study was aimed to analyze the annual reproductive cycle of the freshwater crab Paratelphusa spinigera (Wood Mason, 1871). P. spinigera breeds only once in a year; hence, it is a monovoltine species. Gonad maturation, changes in abdomen shape, size and female maturity index (FMI) marked the onset of sexual maturity of female P. spinigera. The occurrence of berried females marked the onset of breeding season. The fecundity of P. spinigera ranged from 533 to 1306 in number, with an average of 699.11 ± 217.38. The correlation of fecundity with carapace width and body weight was also found to be positively significant (r = 0. 780 and 0.933, respectively). The eggs were carried on the pleopods and nurtured for approximately 30-35 days, until the eggs hatch, showing perfect maternal care. The FMI values ranging between 0.70 and 0.80 represented immature stage of gonadal development. When the FMI ranged from 0.91 to 1.00, all stages of gonadal development, i.e. developing, maturing and mature stages were observed. The females with fully ripe ovary had FMI values greater than 1.00.

Studies on the influence of moisture and specific gravity on the strength properties of mango wood (Mangifera indica)

Influence of moisture and specific gravity on the strength of mango wood is discussed. The co-efficient of correlation between specific gravity and breaking strength was found to be non-significant. The relation of strength and moisture was found to be highly significant. The mean strength values indicated a reduction in strength when the moisture increased from 8.5 to 18.8%. However no appreciable difference in strength values could be observed when moisture increased above 37%. The strength-moisture relationship is a straight line, passing approximately through the fibre saturation point. By using the exponential formula, the breaking strength corresponding to any moisture level between zero and fibre saturation can be determined.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

On sun-drying of Bombay duck

Sun-drying of Bombay duck by hanging on scaffolds gave better products than those obtained by drying them in trays. Optimum rate of drying and quality of dried product were obtained when the fish were suspended at the rate of 50 to 60 per meter length of the rope. The quality of the raw material as affected by the delays in different hauls in the fishing trip was reflected in the dried products also.

Studies on arsenical creosote as a wood preservative for marine structures. Part 1. Incorporation of arsenic in creosote at various temperatures

A detailed study of the fortification of normal creosote and low temperature creosote with As sub(2) O sub(3) at 40°C, 50°C, 60°C, 70°C, 80°C and 90°C was carried out. When compared to normal creosote, low temperature creosote has been found to combine more easily with As sub(2) O sub(3) when temperature was . raised from 40 to 90°C. The incorporated arsenic values obtained shows that low temperature creosote with high phenolic content, retains considerably more As sub(2) O sub(3) and a maximum of 0.2180% w/w can be incorporated in low temperature creosote at 90°C.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

Investigations on wooden floating materials: the loss of buoyancy under continuous immersion in water and the rate of its redemption by drying

A wooden fishing float under immersion in water for long periods is liable to absorb water, the quantity of water absorbed possibly being dependent upon the physical factors like the specific gravity and the inherent property of the material, the time of soaking and the pressure acting on it. Consequently a wooden float is likely to become heavy and loss its original buoyancy. However, when the float is removed from water and dried, the lost buoyancy is regained on complete drying. The present paper is an attempt to elucidate these two important characteristics of some of the chief wooden floating materials used on the West Coast of India.

Utilization of treated wood, steel, fibreglass, ferrocement and aluminium in the construction of modern fishing boats and their comparative cost analysis

Modern fishing boats have to be built not only on perfect lines but also with sound and strong construction materials that will ensure a long lasting trouble free service commensurate with the heavy capital investment involved. Choice of construction materials for fishing boats need careful scrutiny as they have to perform too well under most aggressive environments-sea-water and marine atmosphere. A number of alternative boat-building materials are now available whose comparative merits and demerits as well as comparative costs are brought out in this paper.

Freeze drying of fishery products: Part IV - Biochemical changes occurring in prawn muscle during freezing, freeze drying and prolonged storage of the freeze dried product

The changes occurring in water and salt extractable protein and non-protein fractions in prawn muscle of different species during freezing, freeze drying and subsequent prolonged storage have been studied. There is no denaturation of water extractable proteins, whereas salt extractable proteins were rendered insoluble to the extent of 21% due to freeze drying. The freeze dried products remained in good edible condition for 32 months of storage up to which storage characteristics were followed.

Freeze drying of fishery products: Part V - Storage characteristics of ready-to-serve freeze dried foods

Behaviour of freeze dried ready-to-serve fish based food preparations during prolonged storage at room temp has been studied and reported in this paper. Storage life of such products under the conditions employed in this study can be reckoned in years at our ambient temps.

Observations on the parasites and associates of wood boring molluscs and crustaceans of the south-west coast of India

An interesting assemblage of commensalic organisms ranging from Protozoa to Arthropoda has been identified from the wood boring animals (molluscs and crustaceans) from the south-west coast of India. Certain aspects of the general biology of the associated ciliates such as the nature of incidence, division in relation to environmental parameters, survival outside the body of the host and reactions related to the general condition of the host are described. Results are also presented of the tolerance of the rare commensalic hydroid Eutima commensalis to different salinities of the medium.