Spatial and temporal patterns in the demersal fish community on the shelf and upper slope regions of the Gulf of Alaska

We analyzed data from National Marine Fisheries Service bottom trawl surveys carried out triennially from 1984 to 1996 in the Gulf of Alaska (GOA). The continental shelf and upper slope (0–500 m) of the GOA support a rich demersal fish fauna dominated by arrowtooth flounder (Atheresthes stomias), walleye pollock (Theragra chalcogramma), Pacific cod (Gadus macrocephalus), Pacific halibut (Hippoglossus stenolepis), and Pacific Ocean perch (Sebastes alutus). Average catch per unit of effort (CPUE) of all groundfish species combined increased with depth and had a significant peak near the shelf break at 150–200 m. Species richness and diversity had significant peaks at 200–300 m. The western GOA was characterized by higher CPUEs and lower species richness and diversity than the eastern GOA. Highest CPUEs were observed in Shelikof Strait, along the shelf break and upper slope south of Kodiak Island, and on the banks and in the gullies northeast of Kodiak Island. Significant differences in total CPUE among surveys suggest a 40% increase in total groundfish biomass between 1984 and 1996. A multivariate analysis of the CPUE of 72 groundfish taxa revealed strong gradients in species composition with depth and from east to west, and a weak but significant trend in species composition over time. The trend over time was associated with increases in the frequency of occurrence and CPUE of at least eight taxa, including skates (Rajidae), capelin (Mallotus villosus), three flatfish species, and Pacific Ocean perch, and decreases in frequency of occurrence and CPUE of several sculpin (Myoxocephalus spp.) species. Results are discussed in terms of spatial and temporal patterns in productivity and in the context of their ecological and management implications.

Net phytoplankton and zooplankton in the New York Bight, January 1976 to February 1978, with comments on the effects of wind, Gulf Stream eddies, and slope water intrusions

Results are given of monthly net phytoplankton and zooplankton sampling from a 10 m depth in shelf, slope, and Gulf Stream eddy water along a transect running southeastward from Ambrose Light, New York, in 1976, 1977, and early 1978. Plankton abundance and temperature at 10 m and sea surface salinity at each station are listed. The effects of atmospheric forcing and Gulf Stream eddies on plankton distribution and abundance arc discussed. The frequency of Gulf Stream eddy passage through the New York Bight corresponded with the frequency of tropical-subtropical net phytoplankton in the samples. Gulf Stream eddies injected tropical-subtropical zooplankton onto the shelf and removed shelfwater and its entrained zooplankton. Wind-induced offshore Ekman transport corresponded generally with the unusual timing of two net phytoplankton maxima. Midsummer net phytoplankton maxima were recorded following the passage of Hurricane Belle (August 1976) and a cold front (July 1977). Tropical-subtropical zooplankton which had been injected onto the outer shelf by Gulf Stream eddies were moved to the inner shelf by a wind-induced current moving up the Hudson Shelf Valley. (PDF file contains 47 pages.)

Length-weight relationships of demersal fishes from the upper continental slope off Colombia

Parameters of the length–weight relationship of the form W=aLb are presented for 45 demersal fish species caught on the upper continental slope of the Caribbean Sea off Colombia. The b values varied between 2.13 and 4.97, with the mean b = 3.042 (95% CI, 2.887- 3.196).

Length-weight relationship of some deep-sea fish inhabiting the continental slope beyond 250m depth along the west coast of India

The length–weight relationships of 22 species of deep-sea fishes inhabiting the continental slopes beyond 250 m depth along the West Coast of India are presented. The parameters a and b of the equation W=a Lb were estimated. The fish samples were collected from trawl surveys during 1999 to 2001 on board the FORV Sagar Sampada at a depth range of 250 to 600 m in the area between 7°N and 20°N latitude. The value of b ranged from 1.94 to 3.36.

Chartered Trawling on the Brazilian Slope

Commercial trawling on the Atlantic slope areas off Brazil intensified in the late 1990’s owing to the expansion of coastal trawling areas and the operations of a chartered foreign fleet. Between 2000 and 2003, 59 fishing trips conducted by 10 chartered trawlers were intensely monitored by observers and satellite vessel monitoring systems, totaling 9,069 tows and 30,085.2 trawling hours. Fishing operations occurred in northern, northeastern, southeastern, and southern sectors of the Brazilian coast in 60–1,173 m depths. Total retained and processed catch were 8,074.6 t and 6,479.8 t, respectively. Argentine hake, Merluccius hubbsi; and Argentine shortfin squid, Illex argentinus, were the primary species taken contributing to 41.1% and 28.6% of the overall catch, respectively. The silver John dory, Zenopsis conchifera; monkfish, Lophius gastrophysus; Brazilian codling, Urophycis mystacea; and the black grouper, Epinephelus nigritus, composed 23% of total processed catch, and the remaining 7.2% was composed of deep-sea shrimps (family Aristeidae) and other teleosts and elasmobranches. The occupation of slope areas included an early exploratory phase, followed by directed phases of the upper slope (300–500 m), aiming principally at the Argentine hake, and the lower slope (>700 m), targeting valuable concentrations of deep-sea aristeid shrimps. The role of chartering for slope trawling development was critically addressed. We conclude that chartered vessels were efficient explorers and were particularly important in areas not available to the technologically limited national fleet. Because the charters were market-oriented and had elevated profit demands, however, those vessels quickly turned from exploration to exploitation and competed with national trawlers in shallower areas and produced significant impacts on Brazil’s modest deep-sea resources.

Effects of Gear Modifications on the Trawl Performance and Catching Efficiency of the West Coast Upper Continental Slope Groundfish Survey Trawl

Since 1984, annual bottom trawl surveys of the west coast (California–Washington) upper continental slope (WCUCS) have provided information on the abundance, distribution, and biological characteristics of groundfish resources. Slope species of the deep-water complex (DWC) are of particular importance and include Dover sole, Microstomus pacificus; sablefish, Anoplopoma fimbria; shortspine thornyhead, Sebastolobus alascanus; and longspine thornyhead, S. altivelis. In the fall of 1994, we conducted an experimental gear research cruise in lieu of our normal survey because of concerns about the performance of the survey trawl. The experiment was conducted on a soft mud bottom at depths of 460–490 m off the central Oregon coast. Treatments included different combinations of door-bridle rigging, groundgear weight, and scope length. The experimental design was a 2 ´ 2 ´ 2 factorial within a randomized complete-block. Analysis of variance was used to examine the effects of gear modifications on the engineering performance of the trawl (i.e. trawl dimensions, variation in trawl dimensions, and door attitude) and to determine if catch rates in terms of weight and number of DWC species and invertebrates were affected by the gear modifications. Trawl performance was highly variable for the historically used standard trawl configuration. Improvements were observed with the addition of either a 2-bridle door or lighter ground gear. Changes in scope length had relatively little effect on trawl performance. The interaction of door bridle and ground gear weight had the most effect on trawl performance. In spite of the standard trawl’s erratic performance, catch rates of all four DWC species and invertebrates were not significantly different than the 2-bridle/heavy combination, which did the best in terms of engineering performance. The most important factor affecting DWC catch rates was ground gear. Scope length and the type of door bridle had little effect on DWC catch rates. Subsequent revisions to survey gear and towing protocol and their impact on the continuity of the slope survey time series are discussed.

Survey Assessment of Semi-pelagic Gadoids: The Example of Walleye Pollock, Theragra chalcogramma, in the Eastern Bering Sea

Assessment of walleye pollock, Theragra chalcogramma, in the eastern Bering Sea is complicated because the species is semi-pelagic in habit. Annual bottom trawl surveys provide estimates of demersal abundance on the eastern Bering Sea shelf. Every third year (starting in 1979), an extended area of the shelf and slope is surveyed and an echo integration-midwater trawl survey provides estimates of pollock abundance in midwater. Overall age-specific population and biomass estimates are obtained by summing the demersal and midwater results, assuming that the bottom trawl samples only pollock inhabiting the lower 3 m of the water column. Total population estimates have ranged from 134 x 109 fish in 1979 to 27 x 109 fish in 1988. The very high abundance observed in 1979 reflects the appearance of the unusually large 1978 year class. Changes in age-specific abundance estimates have documented the passage of strong (1978, 1982, and 1984) and weak year classes through the fishery. In general, older fish are more demersally oriented and younger fish are more abundant in midwater, but this trend was not always evident in the patterns of abundance of 1- and 2-year-old fish. As the average age of the population has increased, so has the relative proportion of pollock estimated by the demersal surveys. Consequently, it is unlikely that either technique can be used independently to monitor changes in abundance and age composition. Midwater assessment depends on pelagic trawl samples for size and age composition estimates, so both surveys are subject to biases resulting from gear performance and interactions between fish and gear. In this review, we discuss survey methodology and evaluate assumptions regarding catchability and availability as they relate to demersal, midwater, and overall assessment.

Co-occurrence of bycatch and target species in the groundfish demersal trawl fishery of the U.S. west coast; with special consideration of rebuilding stocks

Bycatch and resultant discard mortality are issues of global concern. The groundfish demersal trawl fishery on the west coast of the United States is a multispecies fishery with significant catch of target and nontarget species. These catches are of particular concern in regard to species that have previously been declared overfished and are currently rebuilding biomass back to target levels. To understand these interactions better, we used data from the West Coast Groundfish Observer Program in a series of cluster analyses to evaluate 3 questions: 1) Are there identifiable associations between species caught in the bottom trawl fishery; 2) Do species that are undergoing population rebuilding toward target biomass levels (“rebuilding species”) cluster with targeted species in a consistent way; 3) Are the relationships between rebuilding bycatch species and target species more resolved at particular spatial scales or are relationships spatially consistent across the whole data set? Two strong species clusters emerged—a deepwater slope cluster and a shelf cluster—neither of which included rebuilding species. The likelihood of encountering rebuilding rockfish species is relatively low. To evaluate whether weak clustering of rebuilding rockfish was attributable to their low rate of occurrence, we specified null models of species occurrence. Results indicated that the ability to predict occurrence of rebuilding rockfish when target species were caught was low. Cluster analyses performed at a variety of spatial scales indicated that the most reliable clustering of rebuilding species was at the spatial scale of individual fishing ports. This finding underscores the value of spatially resolved data for fishery management.

Distribution and co-occurrence of rockfishes (family: Sebastidae) over trawlable shelf and slope habitats of California and southern Oregon

The rockfishes of the sebastid genus Sebastes are a very important fishery resource off the coasts of California and southern Oregon. How-ever, many of the 54 managed stocks of west coast rockfish have recently reached historically low population levels, leading fishery managers to re-examine current management practices. Management of rockfish stocks as multispecies aggregates, as opposed to independent stocks within the ground-fish fishery, can be more desirable when nontargeted bycatch, discard, and management complexity are considered. Rockfish assemblage structure and species co-occurrences were determined by using data from the Alaska Fisheries Science Center triennial continental shelf bottom trawl survey. The weight of rockfish species in trawl catches was expressed as a catch-per-unit-of-effort (CPUE) statistic, from which species spatial distributions, overlaps, diversity, and richness were analyzed. Multidimensional scaling of transformed CPUE data was employed in indirect gradient and multivariate partitioning analyses to quantify assemblage relationships. Results indicated that rockfish distributions closely match the bathymetry of coastal waters. Indirect gradient analysis suggested that depth and latitude are the principal factors in structuring the spatial distributions of rockfish on trawlable habitat. In addition, four assemblages were identified through the joint evaluation of species’ distributions and multivariate partitioning analyses: 1) deep-water slope; 2) northern shelf; 3) southern shelf; and 4) nearshore. The slope, shelf, and near-shore groups are found in depth ranges of 200–500 m, 100–250 m, and 50–150 m, respectively. The division of northern and southern shelf assemblages occurs over a broad area between Cape Mendocino and Monterey Canyon. The results of this analysis are likely to have direct application in the management of rockfish stocks off the coasts of southern Oregon and California.

Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.