Development of a torque meter for fishing vessels

The paper describes the development of an electronic instrument to measure the torque developed on the propeller shaft of fishing vessels at various speeds of the propeller. By measuring the torque, it is possible to determine the actual power transmitted from the engine gear-box unit to the propeller so that propeller efficiency can be evaluated and the optimum size of the propeller for a specific engine and vessel can be determined.

Leistungsmessung an Bord von Fischereifahrzeugen zur Kontrolle der 300-PS-Begrenzung in der Schollenbox

For monitoring of the engine power of fishing vessels permitted for fishery in the plaice box with engine power of 300 HP or less at sea three different portable power measurement systems are developed and tested. A system measuring the twist of the propeller shaft by two divisible gearwheels mounted on the shaft worked well at shafts with roller bearing at both sides of the measured interval of 100–300 mm length. Only at a very few fishing vessels this system is applicable and therefore for monitoring purposes not suitable. The application of a commercial available system measuring the stress at the surface of the shaft was simplified for application by non experts. The torque is measured by strain gauges. The calibration of the system, measuring and recording of the power is done by a PC automatically. A small polished facet on the shaft protected against oxidation is needed for easy and quick application. In this case the system can be used by technical personnel of supervision boats for monitoring of the engine power at sea in a short time. A third power measurement system determinates the torque by measuring the displacement of two supports clamped on the shaft at a distance of 100 mm. The displacement is measured by a micrometer gauge mounted on one of the supports. Readout of the rotating gauge display is possible taking advantage of stroboscopic effect. The system needs no conditioning of the shaft and can be used by non technicians. The development is not finished until now and some additional investigations and tests are required. Additional measures for monitoring of the power on fishing vessels by self recording power measurement systems and sealed fuel racks with limited injection are reported and discussed.

Effect of different feeding levels on the production of Heterobranchus bidorsalis in outdoor concrete tanks

Fry of Heterobranchus bidorsalis (mean weight, 0.03g) were fed at 10, 20, 30, 40 or 50% of their body weight (bw)/day in outdoor concrete tanks in New Bussa, Nigeria. The fry attained the highest average weight of 6.66g in 10 weeks when fed at 40% bw/day. Feed conversion ratio ranged from 2.13 to 9.65, the protein efficiency ratio from 1.33 to 5.93. Results indicated that H. bidorsalis are efficient feed converters. Feed intake was significantly different (p<0.05) between the treatments, specific growth rate (SGR), daily growth rate (DGR), production and average weight gain indicated that 40% of fish biomass was the optimum feeding level