Leistungsmessung an Bord von Fischereifahrzeugen zur Kontrolle der 300-PS-Begrenzung in der Schollenbox

For monitoring of the engine power of fishing vessels permitted for fishery in the plaice box with engine power of 300 HP or less at sea three different portable power measurement systems are developed and tested. A system measuring the twist of the propeller shaft by two divisible gearwheels mounted on the shaft worked well at shafts with roller bearing at both sides of the measured interval of 100–300 mm length. Only at a very few fishing vessels this system is applicable and therefore for monitoring purposes not suitable. The application of a commercial available system measuring the stress at the surface of the shaft was simplified for application by non experts. The torque is measured by strain gauges. The calibration of the system, measuring and recording of the power is done by a PC automatically. A small polished facet on the shaft protected against oxidation is needed for easy and quick application. In this case the system can be used by technical personnel of supervision boats for monitoring of the engine power at sea in a short time. A third power measurement system determinates the torque by measuring the displacement of two supports clamped on the shaft at a distance of 100 mm. The displacement is measured by a micrometer gauge mounted on one of the supports. Readout of the rotating gauge display is possible taking advantage of stroboscopic effect. The system needs no conditioning of the shaft and can be used by non technicians. The development is not finished until now and some additional investigations and tests are required. Additional measures for monitoring of the power on fishing vessels by self recording power measurement systems and sealed fuel racks with limited injection are reported and discussed.

Avaliação dos consumos de materiais estratégicos para a conservação dos engenhos de pesca artesanal de Moçambique e Estudos de constituiçāo tipologia e distribuiçāo de alguns engenhos de pesca artesanal de Moçambique

This technical report comprises two different studies in terms of their conclusions, but based on the same field surveys: “Yearly consumption evaluation of the strategic materials for the artisanal fisheries of Mozambique” and “Constitution, typology and distribution studies of the Mozambican artisanal fishing gears”. In the first of the above studies, the amount of the materials found in each gear, the number of such gears and the wear factor “r” are subject to a computed data processing, producing the following outputs: list of materials demanded in each Mozambican fishing relevant province; list of materials demanded in the whole Mozambican territory. In the second study the observed gears constitutions are analysed and differences and similitudes among them are searched. The details of maneuver and productivity are referred as well. Attention is drawn to the fact that observations did not take place on the whole Mozambican territory, even not in the most representative but in some considerably important fishing centers with reasonable safety and connection facilities. About the first study, when it was not possible to reach such considerably important centers the determination of the approximate picture of them has been achieved by verbal information of people knowing them very well and by the sources referred here in after. Concerning the second study inferences have not been made. Although a limited number of samples has been collected, the accuracy of it has been checked by inquiry. Speculations have been developed only on observed cases. The surveys have been made by a team, assigned by the directors of UD-PPE and Equipesca, under author’s coordination.