The role of research and research institutes in fisheries development in the 1980's

An indication is given as to areas in Nigerian fisheries development which require research in the 1980's: fish resource surveys, fishing technology, fish processing and preservation technology, and aquaculture. The role of research institutes is also considered

On further improvement of the techinque of evaluating summer institutes

Data from an earlier study are reanalyzed to improve upon the evaluation measures of summer institutes. The Summer Institute Efficiency Index is improved by using weighted geometric mean using different ranks as weights for the several dimensions. The coverage utility index is improved by taking the ratings given by all the participants.

State of Technology for In Situ Measures of Salinity Using Conductive Temperature Sensors, Savannah, Georgia, December 3-5, 2007: workshop proceedings

This Alliance for Coastal Technologies (ACT) workshop was convened to assess the availability and state of development of conductivity-temperature sensors that can meet the needs of coastal monitoring and management communities. Rased on the discussion, there are presently a number of commercial sensor options available, with a wide range of package configurations suitable for deployment in a range of coastal environments. However, some of the central questions posed in the workshop planning documents were left somewhat unresolved. The workshop description emphasized coastal management requirements and, in particular, whether less expensive, easily deployed, lower-resolution instruments might serve many management needs. While several participants expressed interest in this class of conductivity-temperature sensors, based on input from the manufacturers, it is not clear that simply relaxing the present level of resolution of existing instruments will result in instruments of significantly lower unit cost. Conductivity-temperature sensors are available near or under the $1,000 unit cost that was operationally defined at the workshop as a breakpoint for what might be considered to be a "low cost" sensor. For the manufacturers, a key consideration before undertaking the effort to develop lower cost sensors is whether there will be a significant market. In terms of defining "low cost," it was also emphasized that the "life cycle costs" for a given instrument must be considered (e.g., including personnel costs for deployment and maintenance). An adequate market survey to demonstrate likely applications and a viable market for lower cost sensors is needed. Another topic for the workshop was the introduction to the proposed ACT verification for conductivity-temperature sensors. Following a summary of the process as envisioned by ACT, initial feedback was solicited. Protocol development will be pursued further in a workshop involving ACT personnel and conductivity-temperature sensor manufacturers.[PDF contains 28 pages]

Ground water-surface water interactions sensor technology, Savannah, Georgia, March 7-9, 2005: workshop proceedings

The Alliance for Coastal Technologies (ACT) held a Workshop on Sensor Technology for Assessing Groundwater-Surface Water Interactions in the Coastal Zone on March 7 to 9,2005 in Savannah, GA. The main goal of the workshop was to summarize the general parameters, which have been found to be useful in assessing groundwater-surface water (GW-SW) interactions in the coastal zone. The workshop participants (Appendix I) were specifically charged with identifying the types of sensor systems, if any, that have been used to obtain time-series data and to make known which parameters may be the most amenable to the development/application of sensor technology. The group consisted of researchers, industry representatives, and environmental managers. Four general recommendations were made: 1. Educate coastal managers and agencies on the importance of GW-SW interactions, keeping in mind that regulatory agencies are driven by a different set of rules than researchers: the focus is on understanding the significance of the problem and providing solutions. ACT could facilitate this process in two ways. First, given that the research literature on this subject is fairly diffuse, ACT could provide links from its web site to fact sheets or other literature. Second, ACT could organize a focused meeting for managers and/or agency groups. Encourage development of primary tools for quantifying flow. The most promising technology in this respect is flow meters designed for flux chambers, mainly because they should be simple to use and can be made relatively inexpensively. However, it should be kept in mind that they provide only point measurements and several would need to be deployed as a network in order to obtain reliable flow estimates. For evaluating system wide GW-SW interactions, tools that integrate the signal over large areas would be required. Suggestions include a user-friendly hydrogeologic models, keeping in mind that freshwater flow is not the entire story, or continuous radon monitors. Though the latter would be slightly more difficult to use in terms of background knowledge, such an instrument would be low power and easy to operate and maintain. ACT could facilitate this recommendation by identifying funding opportunities on its web site and/or performing evaluations of existing technologies that could be summarized on the web site. (pdf contains 18 pages)

Strategies for transfer of aquaculture technology to small-scale fish farmers in Nigeria

There is increasing awareness of aquaculture in Nigeria today for a number of reasons namely: water pollution, declining catch and the awareness of the attractiveness of aquaculture as an investment area and a pivotal point for national development. The development of aquaculture in Nigeria, requires the building up of institutions at the grassroot level and the formulation of policies and programmes for the small fishfarmer. This of course would be backed up by a sound technology generation, verification and packaging, dissemination and use programme

Seabed Sensor Technology, Savannah, Georgia, February 1-3, 2006: workshop proceedings

Future coastal management practices require that a holistic, ecosystem management approach be adopted. Coastal ecosystems, however, present a variety of specific and unique challenges relative to open ocean systems. In particular, interactions with the seabed significantly influence the coastal ecosystem. Observing technologies must be developed and employed to incorporate seafloor interactions, processes and habitat diversity into research and management activities. An ACT Workshop on Seabed Sensor Technology was held February 1-3, 2006 in Savannah, Georgia, to summarize the current state of sensor technologies applicable to examining and monitoring the coastal seabed, including the near-bed benthic boundary layer and surface sediment layer. Workshop participants were specifically charged to identify current sensors in use, recommend improvements to these systems and to identify areas for future development and activities that would advance the use of sensor technology in the observation, monitoring and management of the coastal benthic environment. (pdf contains 23 pages)

Bearbeitung von Fangproben mit neuen elektronischen Messmethoden

For 10 years the Institute for Fishing Technology, Hamburg (IFH) has been carrying out experiments in the brown shrimp fishery with beam trawls aiming at a reduction of unwanted bycatches. When the tests were transferred to commercial fishery conditions the personnel effort and costs increased markedly. It became e.g. necessary to install a deep-freeze chain to make it possible to evaluate more samples in the laboratory. This again required to increase the number of technicians for measuring the fish and shrimp samples, but also made it necessary to perform this work in the most rational and time-saving way by applying modern electronic aids. Though all samples still have to be sorted by species and have to be weighed and measured the introduction of electronic aids, however, like electronic measuring board and computer-aided image processing system, all weight and length data are immediately and digitally recorded after processing. They are transferred via a network to a server PC which stores them into a purpose-designed database. This article describes the applicationof two electronic systems: the measuring board (FM 100, Fa. SCANTROL), iniated by a project in the Norwegian Institute for Fishing Technology, and a computer-aided image processing system, focussing on measuring shrimps in their naturally flexed shape, also developed in the Institute for Fishing Technology in close collaboration with the University of Duisburg. These electronic recording systems allow the consistent and reproducible record of data independent of the changing day-to-day personal form of the staff operating them. With the help of these systems the number of measurements the laboratory could be maximized to 250 000 per year. This made it possible to evaluate, in 1999, 525 catch samples from 75 commercial hauls taken during 15 days at sea. The time gain in measuring the samples is about one third of the time previously needed (i.e. one hour per sample). An additional advantage is the immediate availability of the digitally stored data which enables rapid analyses of all finished subexperiments. Both systems are applied today in several institutes of the Federal Research Centre. The image processing system is now the standard measuring method in an international research project.

Neues aus der Selektionsforschung am Ostseedorsch

In account of the decision of the IBSFC (International Baltic Sea Fisheries Commission) to admit alternative codend constructions to the presently legal of diamond meshes with 120 mm mesh opening, since seven years a vivid research activity is encouraged at the fishing technology institutions around the Baltic. Though a center of gravity in this field of research lies in the EUproject BACOMA (participants Finland Sweden, Denmark) also the corresponding national institutes of other Baltic countries (Germany, Poland, Russia) have been active with similar investigations. German experiments in 1999 dealt with the effect of the use of netting made of double instead of single yarn on the selectivity. Further research was done on modifications of codends made from netting turned 90° from its original orientation and on simplified versions of the so-called Multipanel codend which consists of three equal diamond and three square mesh panels. The experiments demonstrated on the one hand a definite deterioration of the selective properties in a codend made from double instead of single yarn. Constructional changes in codends made from netting turned 90° on the other hand brought a further improvement of the selectivity of such codends. Finally, the investigations on the Multipanel codend revealed the overwhelming influence of the square mesh panels on the selectivity success. If in a conventional diamond codend three windows are cut out starting 50 cm from the real end of the codend in such a way that the remaining parts have the same breadth as the square mesh panels to insert, the selective effect of such a codend is remarkably improved. According to further preliminary tests this seems to be nearly independent from the type of material used.

Investment opportunities in fish seed technology

An examination is made of the requirements for the commercial propagation of carp and tilapia in Nigeria. It is concluded that the operation of a successful Fish Hatchery and fry production system will depend on the following factors: 1) Correct initial planning for intended production (both species and intended numbers); 2) Design of the appropriate facilities to enable required production; 3) Selection of top calibre, dedicated and experienced hatchery staff; and, 4) The ethical responsibility taken by the hatchery management to produce only the highest quality seed under the best possible conditions. Purchasing farmers are dependent on this

Investment prospects in fish feed technology

The author endeavours to analyse the recent trend in the local production of fish by sector over a period of 5 years, 1980-1985 and the data available to the author on the Nigerian fish imports. The present and future deficit in fish production in Nigeria could only be met from the capture fishery and the fish farm industry but more likely from the latter. The production techniques involved in fish feed industry are illustrated in this paper with standard feed formulations to arrive at a suitable fish diet. Associated problems of fish feed industry and their possible solutions are highlighted. A case study of investment prospects in fish feed industry as well as the production of brine shrimps are suggested as possible areas of investments in the industry. The unit production cost of fish feed is about 700/ton, while in the case of artemia (brine shrimp), the estimated unit cost if about 400/ton

Investment opportunity in aquarium technology. Export marketing of tropical aquarium fishes

A brief account is given of the demand for ornamental fish, providing also estimates of world trade volume. The major importing countries are the USA, Japan, Germany, the UK and the Netherlands. Present supply patterns are outlined; although Nigeria has vast natural resources of tropical aquatic life and the right climate for breeding, current exports are estimated at only 5% of the total potential. Recommendations for the promotion of exports of tropical aquarium fish in Nigeria are included

Aquaculture research: technology transfer for rural development in Nigeria

Conventional aquaculture has been promoted in Nigeria for the past five decades with minimal impact on rural communities: from the findings of Maclearen (1949) where he popularized the use of culturable fish predators Lutjanus sp; Pomades sp; Tarpon adanticus; Chrysichthys nigrodigitatus in earthen ponds near Onikan-Lagos, Nigeria; to the finding of Zwilling, 1963, who reported common carp, Cyprinus carpio propagation and culture in Panyan Fish Farm, near Jos; to the findings of FAO, 1965, when the potential culture of marine mullets culture in brackish water ponds in Buguma, Rivers State was presented. The work of other researchers Sivalingam, (1970; 1973), Ezenwa (1976), development officers and extension officers contributed to the development of aquaculture in few rural areas of the country and informed on public and private owned fish farm infrastructures. Despite a moderate long history of aquaculture research and development in Nigeria, an annual production level of 25,000 metric tons was recorded in 1999. This situation calls for a more sustainable approach for a stronger link between aquaculture research and technology transfer for the development of rural communities of Nigeria. This paper therefore examines some of the issues involved in the continuous flow of the new aquaculture technology in the improvement of fish protein output, standard of living of rural farmers and prevention of urban migration by the youth

Sustainability of indigenous technology in postharvest fisheries operations in Edo and Delta states, Nigeria

The study examined the sustainability of various indigenous technologies in post-harvest fishery operation in Edo and Delta States (Nigeria). A total of seventy processors were interviewed during the survey through a random selection. The data obtained were analysed by descriptive statistics. The results obtained revealed that the majority of the fish processors within the study areas were married with women who were not educated beyond the first Leaving School Certificate. Most of the fish processed were bought fresh, while the commonest method of preservation/processing practiced was smoking. The type of processing equipment used was the Chorkor smoking kiln and the drum smoker while the commonest source of energy is firewood. The processing activities within the communities were found to be profitable. However it was observed that due to the high cost of processing materials and equipment, the economic growth and the living standard is quite low. Some recommendations were made to improve the traditional method of fish preservation and processing

Evaluation of transferred fisheries technology in Kainji Lake basin

Fisheries is important to Nigeria agricultural economy because it provides employment for fisherfolks (men and women fishers, fishmongers (fish traders), fish processors and fish farmers. It also supplies protein to the diet of Nigerians and it is equally a viable source of foreign exchange earning to the government.The estimated Nigeria population of 120 million consumes about 1.2million metric tones of fish and fish products annual. This justified the important role fisheries could play in nigerian diet considering that Nigeria has vast inland waters that cover an estimated total surface area of 199,580km super(2) and equally vast sea area of 25,000km super(2). In these waters the author claimed that there are diverse fish resources that are of economic importance in both inland and seawaters. FDF (2000) also estimated that the current annual yield of both inland and seawater put together is about 418,069,3 metric tones from artisanal fisheries and 23,720 metric tones from aquaculture. The shortage between the annual consumption level of 1.2million metric tones and annual yield of 418,069,3 metric tones is made available through importation. It is therefore of concern that given the level of current fish yield from the various fisheries resources the demand still exceeds supply. One wonders whether the production inadequacy is due to poor management of available fisheries resources or that improved fisheries technology that could aid increased production was not efficiently transferred to fish farmers. To answer these questions one need to examine the past and present extension policy in Nigeria as they affect dissemination of fisheries technologies