The diagnostic morphological features of British Sigara striata, S. dorsalis and intermediate specimens (Corixidae), with a new key for identification of adult males

There are 34 species of the family Corixidae (Hemiptera Heteroptera) in Britain and Ireland of which Sigara striata and Sigara dorsalis are the only two British representatives. In this article the authors briefly consider a range of diagnostic features that may be used to separate British specimens of striata from dorsalis. Most of these morphological features have been used in keys to the British species of the subgenus Sigara sensu strictu. A scoring system has also been devised to facilitate the identification of individuals from the southeast of England, although it is applicable to the whole of the British Isles, and a new (short) key is presented.

Behavior ecology of the Humboldt squid, Dosidicus gigas: insights from an animal-borne video and data logging system

Dosidicus gigas is a large pelagic cephalopod of the eastern Pacific that has recently undergone an unexpected, significant range expansion up the coast of North America. The impact that such a range expansion is expected to have on local fisheries and marine ecosystems has motivated a thorough study of this top predator, a squid whose lifestyle has been quite mysterious until recently. Unfortunately, Dosidicus spends daylight hours at depths prohibitive to making observations without significant artificial interference. Observations of this squid‟s natural behaviors have thus far been considerably limited by the bright illumination and loud noises of remotely-operated-vehicles, or else the presence of humans from boats or with SCUBA. However, recent technological innovations have allowed for observations to take place in the absence of humans, or significant human intrusion, through the use of animal-borne devices such as National Geographic‟s CRITTERCAM. Utilizing the advanced video recording and data logging technology of this device, this study seeks to characterize unknown components of Dosidicus gigas behavior at depth. Data from two successful CRITTERCAM deployments reveal an assortment of new observations concerning Dosidicus lifestyle. Tri-axial accelerometers enable a confident description of Dosidicus orientation during ascents, descents, and depth maintenance behavior - previously not possible with simple depth tags. Video documentation of intraspecific interactions between Dosidicus permits the identification of ten chromatic components, a previously undescribed basal chromatic behavior, and multiple distinct body postures. And finally, based on visualizations of spermatophore release by D. gigas and repetitive behavior patterns between squid pairs, this thesis proposes the existence of a new mating behavior in Dosidicus. This study intends to provide the first glimpse into the natural behavior of Dosidicus, establishing the groundwork for a comprehensive ethogram to be supported with data from future CRITTERCAM deployments. Cataloguing these behaviors will be useful in accounting for Dosidicus‟ current range expansion in the northeast Pacific, as well as to inform public interest in the impacts this expansion will have on local fisheries and marine ecosystems.

Evaluation of the In Situ Ichthyoplankton Imaging System (ISIIS): comparison with the traditional (bongo net) sampler

Plankton and larval fish sampling programs often are limited by a balance between sampling frequency (for precision) and costs. Advancements in sampling techniques hold the potential to add considerable efficiency and, therefore, add sampling frequency to improve precision. We compare a newly developed plankton imaging system, In Situ Ichthyoplankton Imaging System (ISIIS), with a bongo sampler, which is a traditional plankton sampling gear developed in the 1960s. Comparative sampling was conducted along 2 transects ~30–40 km long. Over 2 days, we completed 36 ISIIS tow-yo undulations and 11 bongo oblique tows, each from the surface to within 10 m of the seafloor. Overall, the 2 gears detected comparable numbers of larval fishes, representing similar taxonomic compositions, although larvae captured with the bongo were capable of being identified to lower taxonomic levels, especially larvae in the small (<5 mm), preflexion stages. Size distributions of the sampled larval fishes differed considerably between these 2 sampling methods, with the size range and mean size of larval fishes larger with ISIIS than with the bongo sampler. The high frequency and fine spatial scale of ISIIS allow it to add considerable sampling precision (i.e., more vertical sections) to plankton surveys. Improvements in the ISIIS technology (including greater depth of field and image resolution) should also increase taxonomic resolution and decrease processing time. When coupled with appropriate net sampling (for the purpose of collecting and verifying the identification of biological samples), the use of ISIIS could improve overall survey design and simultaneously provide detailed, process-oriented information for fisheries scientists and oceanographers.

Identification of biodiversity and distribution pattern of benthic Foraminifera and Ostracoda in continental shelf sediments of the Oman Sea

Biodiversity and distribution of benthic Foraminifera and Ostracoda in the continental shelf sediments of the Omman Sea was studied in order to indicating of the composition of benthic foraminiferal and ostracodal communities and determining of their relationship with the environmental factors of the Omman Sea. Sediment samples were gathered in winter 2006 from twelve stations ranging in depth from 30 to 103 meters. Environmental factors including depth, temperature, salinity, dissolved Oxygen and pH were measured with a CTD system during sampling time and grain size and total organic matter were measured in laboratory. From the overall 57 benthic foram species, there were 52 identified species belong to 25 genera of 16 families. The cosmopolitan foraminifer, Ammonia beccarii, was common in all sampling stations. The composition of benthic foram communities had a highly positive correlation with depth, salinity and total organic matter. From the overall 30 ostracod species, there were 26 identified species belong to 22 genera of 13 families. Diversity and aboundance of ostracoda of the Oman Sea decreased from east to west and from south to north but increased slightly in the northwest (near the Strait of Hormoz). Ostracoda of the genus Propontocypris were common in all sampling stations but the genera Cyprideis, Paradoxostom and Hemicytheridea were rare in the Oman Sea. Diversity and aboundance of ostracoda in northern regions were less than southern and were less than foraminifera too. The composition of ostracodal communities had a highly positive correlation with dept, salinity and grain size. Biodiversity and distribution pattern of benthic foraminifera and ostracoda were being different in various sampling stations, especially between northern and southern regions. Water depth, salinity and structure of the sediments were the most important abiotic factors controlling the distribution pattern of benthic foraminifera and ostracoda in the Omman Sea. None existence or rare observation of structural abnormalities and oil polluted individuals in the vicinity of all sampling stations, resulted to the "clean" benthic environment of the Omman Sea.

Study on effects of extracted probiotics from microbial flora of digestive system on growth indices in beluga (Huso huso) and Persian sturgeon (Acipenser persicus)

Isolation of Lactic Acid Bacteria (LAB) was carried out from gastro intestinal tract of beluga and Persian sturgeon at international sturgeon research institute and PCR has been used for bacteria Identification. Two species of LAB including Enterococcus seriolicida and Leuconostoc mesenteroides were isolated from Gastrointestinal tract (GI) of persian sturgeon in this study and the counts of Leu. mesenteroides (4.63×102 CFU/gr of GI) was significantly higher than other species. Lactobacillus curvatus, Lactococcus raffinolactis, Lactococcus lactis and Streptococcus sp. were also isolated from GI of beluga and maximum counts was belonged to Lb. curvatus (4.63×102 CFU/gr of GI) in this species. Dominant species were lyophilized and adding to the water since start of mix feeding of sturgeon with different counts including 2×109, 5×109 and 9×109 CFU/gr of live food, 4 times a day. The results revealed that the maximum and minimum growth rate and protease, amylase, and lipase activity in beluga was gained by using of Lb. curvatus with total viable count of 9×10 9 CFU/gr of live food and Leu. mesenteroides with total viable count of 9×109 CFU/gr of live food. According to the results of this study, the maximum and minimum growth rate and protease, amylase, and lipase activity in Persian sturgeon was gained by using of Leu. mesenteroides with total viable count of 2×10 9 CFU/gr of live food and Lb. curvatus with total viable count of 9×109 CFU/gr of live food. Histological study showed that gastrointestinal development was same during larva rearing in control and other treatments but the size of liver was bigger in treatments that received nonspecific LAB in both species. According to the results, positive effects of using dominant specific LAB bacteria for larviculture of sturgeon has been proved in this study.

Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.