Quality of cured fish on the west coast: comparative study with the IS specifications

Moisture and salt content in cured fish products from various centres on the west coast of India are compared. The moisture contents varied in samples from different centres, whereas the salt content remained more or less uniform. The deviations from the Indian standard specification were highly significant in both cases. The high mean moisture values and low salt values with respect to accepted standards are indicative of the improper drying and poor salting.

Survey of exist specifications morphometric, meristic and inter species molecular genetic on Bream (Abramis brava orientalis) in Anzali wetland, southern coast of Caspian Sea, Aras Dam Lake and Azerbijan Republic

Bream (Abramis brava orientalis) is one of Cyprindae the Caspian Sea and its basin which has a special ecological, biological and economical role. Stock of this fish in the Caspian Sea has reduced during several years for different reason the over fishing, different industrial, agriculture, urban pollution and destroy of the spawning habitat. So that fishery company decided to recover the stock of this fish by the way of artificial reproduction of a Bream couple hunted from south coast of the Caspian Sea (Iran) and setting the fingerling to the rivers and inflow wetlands of the Caspian Sea.This activity has due to 20 tons Bream annual fishing in the Iranian South coast of the Caspian Sea (Gilan province coast and Anzali wetland), The artificial reproduction has decreased Bream population diversity of Caspian sea and Anzali wetland.So it has been declined to improve Braem population diversity by the entrance of Azerbijan republic Bream and encounter to the Caspian sea Bream. Meanwhile there is Bream in the Aras Dam Lake which had been forgotten by the Fishery Company of Iran .For this reason specifications morphometric, meristic and inter species Molecular Genetic have been surveyed in Anzali wetland,Southern coast of Caspian Sea ,Aras Darn Lake and Azerbijan republic during 2003-2005. According to the research on specifications of Morphometric and Meristic of Anzali wetland(120 species),Southern coast of Caspian Sea(90 species), Aras Dam Lake(110 species) and Azerbijan Republic(125 species)has Morphometric and Meristic differences. So that average weight and total length of Anzali wetland Bream respectively was 167 g and 23/76 cm, 102 g and 27/62 cm in Caspian Sea , 461 g and 3 5/38 cm in Aras Darn Lake and 3 4189 g and 15/21 cm in Azerbijan republic (We forced to use 1 year Bream of artificial reproduction in Iran). Also variation coefficient average Morphometric, Morphometric specification Ration and meristic in Anzali wetland Bream was 17/45, 21/56 and 4/63, in Caspian Sea bream 22/58, 15/27 and 3124, in Aras Dam lake Lake 17145. 1.5/27 and 3/57 and Azerbaijan republic Bream 22/29, 19/66 and 4/22. Also Bream of these four regions in general status had Morphometric significant differences based on One Way ANOVA Analysis. Meanwhile Anzali wetland Bream with Caspian Sea Bream from 41 Morphometric surveyed factors in 33 factors, with Aras Darn Lake Bream in 41 factors, with Azerbkjan republic Bream in 41 factors,Caspian Sea Bream with Aras Darn Lake Bream in 36 factors,with Azerbijan republic B ream in 40 factors and A ras Dam L ake Bream with Azerbijan republic Bream in 38 factors had significant statistical differences. These four regions Bream had differences according to the Morphomertric specification ration based on One Way ANOVA Analysis. Also Anzali wetland Bream was surveyed with Caspian Sea Bream from 37 factors i n 27 factors, Anzali wetland Bream with Aras Dam 1ake in 37 factors Anzali wetland Bream with Azerbijan republic Bream in 32 factors,Caspian sea bream with Arsa Dam Lake Bream in 26 factors, Caspian Sea Bream with Azerbijan republic Bream in 29 factors and Aras Dam Lake Bream with Azerbijan republic Bream in 34 factor had significant statistical differences. Based on Meristic factor of four regions bream in 16 surveyed factors in 10 factors had meaningful differences according to the One Way ANOVA Analysis. While Anzali wetland Bream was surveyed with Caspian Sea Bream from in 3 factors,Anzali wetland Bream with Aras Dam lake in 8 factors,Anzali wetland Bream with Azerbijan republic B ream in 6 factors,Caspian Sea bream with Arsa Dam Lake Bream in 6 factors,Caspian sea Bream with Azerbijan republic Bream in 3 factors and Aras Dam Lake Bream with Azerijan republic Bream in 8 factor had significant statistical differences.Meanwihle based on Factor Analysis and Discriminant Breams had differences. Also according to the resrarchs Anzali wetland Bream in 0+ age group till 5+ (6 age groups),Caspian Sea bream in 1+ - 5+(5 age groups),Aras Darn Lake Bream in 1+ - 7+ (7 age groups) and Azerbijan republic Bream for Morphometric and Meristic studies in 1+age group and for molecular Genetic reaserch were in 8+and 9+ age groups. According to the research 4 ecosystems Bream in status of same age, Aras lake Bream were bigger according to weight and length.Also in this research genetic diversity between four population was researched by PCR-RFLP technic on a piece of mitochondrion genome with the length of 3500bp contain of tRNA-leu,tRNA-glu,ND5/6,Cytb. Between 17 used enzyme. 4 enzyme, Dral, Bc11, Haefll and Banff showed diversity in totally 6 composite haplotype was detected. Maximum nucleotide diversity by the value% 0/58 in Azerbijan republic Bream by all haplotype. Aras darn Lake Bream had 2 haplotype and nucleotide diversity of %0/35.Anzali wetland and Caspian Sea Bream had no diversity. Statistical analysis by the usage of Monte Carlo with 1000 repeat showed significant differences between Azerbaijan Bream and other Bream(P<0/0001) but there was no significant difference between 3 regions Bream(P>0/5).

Informational report: Bycatch reduction devices used in the Pink Shrimp trawl fishery

The California Fish and Game Commission (Commission) has the authority to require one or any combination of Bycatch Reduction Device (BRD) types in the trawl fishery within California waters for Pacific ocean shrimp (Pandalus jordani), most commonly referred to as pink shrimp. The purpose of this report is to provide the Commission with the best available information about the BRDs used in the pink shrimp trawl fishery. The mandatory requirement for BRDs occurred in California in 2002, and in Oregon and Washington in 2003, resulting from an effort to minimize bycatch of overfished and quota managed groundfish species. Three types of BRDs currently satisfy the requirement for this device in the California fishery: 1) the Nordmøre grate (rigid-grate excluder); 2) soft-panel excluder; and 3) fisheye excluder; however, the design, specifications, and efficacy differ by BRD type. Although no data has been collected on BRDs directly from the California pink shrimp fishery, extensive research on the efficacy and differences among BRD types has been conducted by the Oregon Department of Fish and Wildlife (ODFW) since the mid-1990s. Rigid-grate excluders are widely considered to be the most effective of the three BRD types at reducing groundfish bycatch. Over 90 percent of the Oregon pink shrimp fleet use rigid-grate excluders. The majority of the current California pink shrimp fleet also uses rigid-grate excluders, according to a telephone survey conducted by the California Department of Fish and Game (Department) in 2007-2008 of pink shrimp fishermen who have been active in the California fishery in recent years. Hinged rigid-grate excluders have been developed in recent years to reduce the bending of the BRD on vessels that employ net reels to stow and deploy their trawl nets, and they have been used successfully on both single- and double-rig vessels in Oregon. Soft-panel excluders have been demonstrated to be effective at reducing groundfish bycatch, although excessive shrimp loss and other problems have also been associated with this design. Fisheye excluders have been used in the California fishery in the past, but they were disapproved in Oregon and Washington in 2003 because they were found to be less effective at reducing groundfish bycatch than other designs. The reputation of the United States west coast pink shrimp fishery as one of the cleanest shrimp fisheries in the world is largely attributed to the effectiveness of BRDs at reducing groundfish bycatch. Nevertheless, BRD research and development is still a relatively new field and additional modifications and methods may further reduce bycatch rates in the pink shrimp fishery.(PDF contains 12 pages.)

Currents observed in Panama Bay during September-October 1958

ENGLISH: During the period extending from late August to early October 1958 the United States Navy Hydrographic Office (now the United States Oceanographic Office) undertook a program of current observations in the western part of Panama Bay. The specifications of the survey called for half-hourly monitoring of currents at three depths at each of six locations, one for thirty days and five for five days. Although not all these objectives were realized because of instrument malfunctions and failures, sufficient data were collected at five stations to provide a fairly detailed description of the current pattern as it existed at the times of observation. This report is concerned first with a discussion of those data and the procedures used to reduce them to the tidal and net current components and second, with the effects on the current pattern of tidal amplitude, bottom topography and bottom friction. SPANISH: Durante el período entre fines de agosto y principios de octubre de 1958, la United States Navy Hydrographic Office (ahora la United States Navy Oceanographic Office) tomó a su cargo un programa para observar las corrientes en la parte occidental de la Bahía de Panamá. De acuerdo con las especificaciones del proyecto, las observaciones de las corrientes debían hacerse cada media hora a tres profundidades en cada una de seis localidades; en una de ellas durante treinta días yen las otras cinco durante cinco días. A pesar de que no todos estos objetivos fueron cumplidos a causa del mal funcionamiento y fallas instrumentales, se recogieron suficientes datos en cinco estaciones, como para proporcionar una descripción bastante detallada de la pauta de las corrientes, tal como existía durante las observaciones. Este informe se refiere, primero, al análisis y examen de dichos datos y a los procedimientos empleados para reducir éstos a los componentes de las corrientes netas y a los componentes de las corrientes durante la mareas, y segundo, al efecto que tienen sobre la pauta de las corrientes la fluctuación de las mareas, la topografía del fondo y la fricción del fondo.

Hydrocarbon sensors for oil spill prevention and response, Seward, Alaska, April 8th-10th, 2008: workshop proceedings

During April 8th-10th, 2008, the Aliance for Coastal Technology (ACT) partner institutions, University of Alaska Fairbanks (UAF), Alaska SeaLife Center (ASLC), and the Oil Spill Recovery Institute (OSRI) hosted a workshop entitled: "Hydrocarbon sensors for oil spill prevention and response" in Seward, Alaska. The main focus was to bring together 29 workshop participants-representing workshop managers, scientists, and technology developers - together to discuss current and future hydrocarbon in-situ, laboratory, and remote sensors as they apply to oil spill prevention and response. [PDF contains 28 pages] Hydrocarbons and their derivatives still remain one of the most important energy sources in the world. To effectively manage these energy sources, proper protocol must be implemented to ensure prevention and responses to oil spills, as there are significant economic and environmental costs when oil spills occur. Hydrocarbon sensors provide the means to detect and monitor oil spills before, during, and after they occur. Capitalizing on the properties of oil, developers have designed in-situ, laboratory, and remote sensors that absorb or reflect the electromagnetic energy at different spectral bands. Workshop participants identified current hydrocarbon sensors (in-situ, laboratory, and remote sensors) and their overall performance. To achieve the most comprehensive understanding of oil spills, multiple sensors will be needed to gather oil spill extent, location, movement, thickness, condition, and classification. No single hydrocarbon sensor has the capability to collect all this information. Participants, therefore, suggested the development of means to combine sensor equipment to effectively and rapidly establish a spill response. As the exploration of oil continues at polar latitudes, sensor equipment must be developed to withstand harsh arctic climates, be able to detect oil under ice, and reduce the need for ground teams because ice extent is far too large of an area to cover. Participants also recognized the need for ground teams because ice extent is far too large of an area to cover. Participants also recognized the need for the U.S. to adopt a multi-agency cooperation for oil spill response, as the majority of issues surounding oil spill response focuses not on the hydrocarbon sensors but on an effective contingency plan adopted by all agencies. It is recommended that the U.S. could model contingency planning based on other nations such as Germany and Norway. Workshop participants were asked to make recommendations at the conclusion of the workshop and are summarized below without prioritization: *Outreach materials must be delivered to funding sources and Congressional delegates regarding the importance of oil spill prevention and response and the development of proper sensors to achieve effective response. *Develop protocols for training resource managers as new sensors become available. *Develop or adopt standard instrument specifications and testing protocols to assist manufacturers in further developing new sensor technology. *As oil exploration continues at polar latitudes, more research and development should be allocated to develop a suite of instruments that are applicable to oil detection under ice.

The BACOMA cod-end. History and recent developments in BACOMA cod-end regulations and a proposal for abetter specification of the BACOMA cod-end for Baltic Sea cod fishery

To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.

Measures of turbidity in coastal waters, Coconut Island, Oahu, Hawaii, August 31 - September 2, 2005: workshop proceedings

A three day workshop on turbidity measurements was held at the Hawaii Institute of Marine Biology from August 3 1 to September 2, 2005. The workshop was attended by 30 participants from industry, coastal management agencies, and academic institutions. All groups recognized common issues regarding the definition of turbidity, limitations of consistent calibration, and the large variety of instrumentation that nominally measure "turbidity." The major recommendations, in order of importance for the coastal monitoring community are listed below: 1. The community of users in coastal ecosystems should tighten instrument design configurations to minimize inter-instrument variability, choosing a set of specifications that are best suited for coastal waters. The IS0 7027 design standard is not tight enough. Advice on these design criteria should be solicited through the ASTM as well as Federal and State regulatory agencies representing the majority of turbidity sensor end users. Parties interested in making turbidity measurements in coastal waters should develop design specifications for these water types rather than relying on design standards made for the analysis of drinking water. 2. The coastal observing groups should assemble a community database relating output of specific sensors to different environmental parameters, so that the entire community of users can benefit from shared information. This would include an unbiased, parallel study of different turbidity sensors, employing a variety of designs and configuration in the broadest range of coastal environments. 3. Turbidity should be used as a measure of relative change in water quality rather than an absolute measure of water quality. Thus, this is a recommendation for managers to develop their own local calibrations. See next recommendation. 4. If the end user specifically wants to use a turbidity sensor to measure a specific water quality parameter such as suspended particle concentration, then direct measurement of that water quality parameter is necessary to correlate with 'turbidity1 for a particular environment. These correlations, however, will be specific to the environment in which they are measured. This works because there are many environments in which water composition is relatively stable but varies in magnitude or concentration. (pdf contains 22 pages)

On the classification of lakes and lake-like bodies of the Ukraine [Translation from: Gidrobiologicheskie Zhurnal, Kiev 19(2) 100-101, 1983]

In the Ukraine there are several thousand large, medium and small lakes and lake-like reservoirs, distinguished by origin, salinity, regional position, productivity and by construction a significant number of large and small water bodies, ponds and industrial reservoirs of variable designation. The problem of national systems necessitates the creation of specific schemes and classifications. Classifying into specific types of reservoir by means of suitable specifications is required for planning national measures with the objective of the rational utilisation of natural resources. It is now necessary to consider the present-day characteristics of Ukranian lakes. In the case of the Ukraine it is possible to use two approaches - genetical and ecological. This paper uses the genetical system to classify the lake-like water bodies of the Ukraine.

A prior for steepness in stock-recruitment relationships, based on an evolutionary persistence principle

Priors are existing information or beliefs that are needed in Bayesian analysis. Informative priors are important in obtaining the Bayesian posterior distributions for estimated parameters in stock assessment. In the case of the steepness parameter (h), the need for an informative prior is particularly important because it determines the stock-recruitment relationships in the model. However, specifications of the priors for the h parameter are often subjective. We used a simple population model to derive h priors based on life history considerations. The model was based on the evolutionary principle that persistence of any species, given its life history (i.e., natural mortality rate) and its exposure to recruitment variability, requires a minimum recruitment compensation that enables the species to rebound consistently from low critical abundances (Nc). Using the model, we derived the prior probability distributions of the h parameter for fish species that have a range of natural mortality, recruitment variabilities, and Nt values.

Estimates of commercial longline selectivity for Pacific halibut (Hippoglossus stenolepis) from multiple marking experiments

The term “selectivity” refers to the relationship between the size (or age) of a fish and its vulnerability to a given kind of fishing gear. A selectivity schedule, along with other parameters, is normally estimated in the course of fitting a stock assessment model, and the estimated schedule can have a large effect on both the estimate of present stock abundance and the choice of an appropriate harvest rate. The form of the relationship is usually not known and not well determined by the data, and equally good model fits can often be obtained with different plausible specifications of selectivity. Choosing among the model fits and associated abundance estimates in this situation is problematic (Sigler, 1999; Sullivan et al., 19

Effect of different media on the determination of the number of micro organisms in frozen prawns (shrimp)

The Indian standards Institution have recently laid down specifications for the grading of frozen shrimp of which the bacterial examination of the product forms a significant part. Work carried out in this regard in our laboratories have shown that various improvements could be made in the composition of the medium to obtain a more true picture of the total bacterial count. Changes in the medium for total bacterial count have, therefore, been suggested and the reasons for the same discussed.

Preliminary observations of the use of under-water light in fish catch

Experiments with drift gill net with under-water lights were carried out in the sea and estuarine region along with a control net of the same specifications without any light in the same fishing ground for comparison. The experimental net caught more fish in number and weight than the control. Fishes like pomfrets (Pampus chinensis, Parastromafeus niger), seer (Scomberomorus spp), hilsa (Ilisha spp) etc showed positive phototaxis and were gilled encircling the point of illumination. Young skates (Mobula spp) and Polynemus tetradactylus were antiphototactic. The number of fishes caught increased with increase in period of illumination. The catch of larger fishes was maximum at 60 mts of illumination and the total catch increased with increase in intensity of light. Additional cost of operation with under-water light was Rs 1-25 per hr but the catch was 4 to 5 times greater than that of the control net.

A survey on the quality of Indian fish meal of commerce

Data on proximate composition, total volatile bases, total non-protein nitrogen and bacterial quality of commercial samples of Indian fish meal are presented in this communication. The samples vary very much in quality depending on the type of raw material used and method of processing followed. The data are discussed in relation to the Indian standard Specifications for fish meal as livestock feed.

Selectivity of gill nets for Scomberomorus commersoni

Selectivity of gill nets for S. commersoni was studied with nets made of 4 different mesh sizes fabricated with 4 different specifications of nylon twines. Fishing operations were conducted off Cochin through the fishing seasons 1968-72. The commercially significant size group of S. commersoni was found to fall in the length range of 850-950 mm. The optimum mesh size required for the capture of this group of S. commersoni was estimated as 76 mm. bar in nylon twine 210/12/3. The relationship between the twine size and mesh size was also worked out.

A pilot scale set up for the manufacture of fish hydrolysate

This paper describes a set up for a pilot plant with a capacity of 50 kg raw material per batch for the production of fish hydrolysate by enzymatic hydrolysis. Process flow sheet and complete specifications and functions of individual equipment have been described. Multifunctional equipment designed for this pilot plant set up has reduced the number of equipment considerably.