A pilot scale set up for the manufacture of fish hydrolysate

This paper describes a set up for a pilot plant with a capacity of 50 kg raw material per batch for the production of fish hydrolysate by enzymatic hydrolysis. Process flow sheet and complete specifications and functions of individual equipment have been described. Multifunctional equipment designed for this pilot plant set up has reduced the number of equipment considerably.

Interim report on the progress of an inventory of artesian wells in Florida: leading to the enforcement of sections 370.051 - 370.54, Florida statues

One of the causes of lower artesian pressure, water waste and aquifer contamination is the misuse and insufficient care of artesian wells. In 1953, Senate Bill No. 57, entitled "An Act to Protect and Control the Artesian Waters of the State" (see Appendix) became a law. This law was passed through the efforts exerted by leading members of the Senate and the House of Representatives, who understood the need for a wise and controlled expenditure of our most valuable natural resource. The State Geologist and his authorized representatives were designated by this law to enforce this conservation measure; however, no financial provision was included for the 1953-55 biennium. The proposed program of the Florida Geological Survey for this biennium did not include the funds nor provide any full-time personnel for the enforcement of this statute. As a result, little actual work was accomplished during these two years, although much time was given to planning and discussion of the problem. Realizing that this program could provide additional basic data needed in the analysis of the water-supply problem, the State Geologist sought and was granted by the 1955 Legislature adequate funds with which to activate the first phase of the enforcement of Florida Statute No. 370.051-054. Enumerated below is a summary of the progress made on this investigation as outlined previously: 1. Data have been collected on 967 wildly flowing wells in 22 counties. 2. Chloride determinations have been run on 850 of the 967 wells. 3. Of the 967 wells, 554 have chlorides in excess of the 250 ppm, the upper limit assigned by the State Board of Health for public consumption. 4. Water escapes at the rate of 37, 762 gallons per minute from these 967 wells. This amounts to 54, 377, 280 gallons per day. The investigation is incomplete at this time; therefore, no final conclusions can be reached. However, from data already collected, the following recommendations are proposed: 1. That the present inventory of wildly flowing wells be completed for the entire State. 2. That the current inventory of wildly flowing wells be expanded at the conclusion of the present inventory to include all flowing wells. 3. That a complete statewide inventory program be established and conducted in cooperation with the Ground Water Branchof the U.S. Geological Survey. 4. That the enforcement functions as set down in Sections 370.051/.054, Florida Statutes, be separated from the program to collect water-resource data and that these functions be given to the Water Resources Department, if such is created (to be recommended by the Water Resources Study Commission in a water policy law presented to the 1957 Legislature). 5. That the research phase (well inventory) of the program remain under the direction of the Florida Geological Survey. (PDF contains 204 pages.)

User’s Guide to ADMB2R: A Set of AD Model Builder Output Routines Compatible with the R Statistics Language

ADMB2R is a collection of AD Model Builder routines for saving complex data structures into a file that can be read in the R statistics environment with a single command.1 ADMB2R provides both the means to transfer data structures significantly more complex than simple tables, and an archive mechanism to store data for future reference. We developed this software because we write and run computationally intensive numerical models in Fortran, C++, and AD Model Builder. We then analyse results with R. We desired to automate data transfer to speed diagnostics during working-group meetings. We thus developed the ADMB2R interface to write an R data object (of type list) to a plain-text file. The master list can contain any number of matrices, values, dataframes, vectors or lists, all of which can be read into R with a single call to the dget function. This allows easy transfer of structured data from compiled models to R. Having the capacity to transfer model data, metadata, and results has sharply reduced the time spent on diagnostics, and at the same time, our diagnostic capabilities have improved tremendously. The simplicity of this interface and the capabilities of R have enabled us to automate graph and table creation for formal reports. Finally, the persistent storage in files makes it easier to treat model results in analyses or meta-analyses devised months—or even years—later. We offer ADMB2R to others in the hope that they will find it useful. (PDF contains 30 pages)

User’s Guide to C2R: A Set of C Language Output Routines Compatible with the R Statistics Language

C2R is a collection of C routines for saving complex data structures into a file that can be read in the R statistics environment with a single command.1 C2R provides both the means to transfer data structures significantly more complex than simple tables, and an archive mechanism to store data for future reference. We developed this software because we write and run computationally intensive numerical models in Fortran, C++, and AD Model Builder. We then analyse results with R. We desired to automate data transfer to speed diagnostics during working-group meetings. We thus developed the C2R interface to write an R data object (of type list) to a plain-text file. The master list can contain any number of matrices, values, dataframes, vectors or lists, all of which can be read into R with a single call to the dget function. This allows easy transfer of structured data from compiled models to R. Having the capacity to transfer model data, metadata, and results has sharply reduced the time spent on diagnostics, and at the same time, our diagnostic capabilities have improved tremendously. The simplicity of this interface and the capabilities of R have enabled us to automate graph and table creation for formal reports. Finally, the persistent storage in files makes it easier to treat model results in analyses or meta-analyses devised months—or even years—later. We offer C2R to others in the hope that they will find it useful. (PDF contains 27 pages)

Policy analysis of shoreline restoration options on private shorelines of Puget Sound

Puget Sound shorelines have historically provided a diversity of habitats that support a variety of aquatic resources throughout the region. These valued natural resources are iconic to the region and remain central to both the economic vitality and community appreciation of Puget Sound. Deterioration of upland and nearshore shoreline habitats, have placed severe stress on many aquatic resources within the region (PSAT, 2007). Since a majority of Washington State shorelines are privately owned, regulatory authority to legislate restoration on private property is limited in scope and frequency. Washington States’ Shoreline Management Act (RCW 90.58) requires local jurisdictions to plan for appropriate future shoreline uses. Under the Act, future development can be regulated to protect existing ecological functions, but lost functions cannot be restored without purchase or compensation of restored areas. Therefore, questions remains as to the ecological resilience of the region when considering cumulative effect of existing/ongoing shoreline development constrained by limited shoreline restoration opportunities. In light of these questions, this analysis will explore opportunities to promote restoration on privately owned shorelines within Puget Sound. These efforts are intended to promote more efficient ecosystem management and improve ecosystem-wide ecological functions. From an economics perspective, results of past shoreline management can generally be characterized as both market and government failure in effectively protecting the publics’ interest in maintaining healthy shoreline resources. Therefore coastal development has proceeded in spite of negative externalities and market imbalances resulting in inefficient resource management driven by the individual ambitions of private shoreline property owners to develop their property to their highest and best use. Federally derived property rights will protect continuation of existing uses along privately owned shorelines; therefore, a fundamental challenge remains in sustainable management of existing shoreline resources while also restoring ecological functions lost to past mistakes in an effort to increase the ecologic resiliency within the region. (PDF contains 5 pages)

Oyster spat set on natural clutch in the Maryland portion of the Chesapeake Bay (1939 - 1975)

Basically this report is an attempt to document trends in oyster recruitment since 1939 and to relate those trends to the actual oyster harvest throughout the Maryland portion of the Chesapeake Bay. It is also hoped that the data as well as the charts compiled in this report will serve as a reference to aid in future studies on Chesapeake Bay oysters. A few if the major biological factors that affect the natural reproduction of the oyster and environmental degradations that may possibly affect oyster reproduction or harvest in the Chesapeake Bay are also briefly discussed. (PDF contains 32 pages)

Upland hill farming for water, wildlife and food

The economic, environmental and social benefits of more sensitive land use practices that protect or restore the natural functions of river catchments have been widely discussed. Changing land use has implications for a wide range of other biological communities. Some studies have already been undertaken on the benefits of sensitive farming at the catchment scale in England and Wales. However, there is a gap in these studies at the local scale, and particularly for upland farms from which headwaters arise. This article documents a case study relating to a successful partnership in Cumbria, UK, set within the wider context of catchment management. Whilst the case study is not highly detailed, and some costs have been described in outline only to protect confidentiality and commercial sensitivity, it provides some generic lessons and may therefore be useful in informing more sustainable policy-making. High Hullockhowe Farm near Haweswater, which was used a the case study highlighting changes in farm practise, costs and benefits, water resources and biodiversity. The authors relate the case study to wider policy implications.

Observations on the behaviour of Polyphemus pediculus and functions of its extremities in the process of feeding. [Translation of: Materialy po biologii i gidrologii Volzhskikh vodokhranilishch, pp. 13-16. Moscow, 1965]

The author summarises observations on the behaviour of Polyphemus pediculus and functions of its extremities in the process of feeding. The crustacean Polyphemus pediculus seizes its prey, kills it and pulverises its food with the help of its extremities. Therefore for a study of its feeding method was necessary not only to have been acquainted in detail with the structure of its extremities, but also to have observed their interaction for the accomplishment of the stated functions.