Leistungsmessung an Bord von Fischereifahrzeugen zur Kontrolle der 300-PS-Begrenzung in der Schollenbox

For monitoring of the engine power of fishing vessels permitted for fishery in the plaice box with engine power of 300 HP or less at sea three different portable power measurement systems are developed and tested. A system measuring the twist of the propeller shaft by two divisible gearwheels mounted on the shaft worked well at shafts with roller bearing at both sides of the measured interval of 100–300 mm length. Only at a very few fishing vessels this system is applicable and therefore for monitoring purposes not suitable. The application of a commercial available system measuring the stress at the surface of the shaft was simplified for application by non experts. The torque is measured by strain gauges. The calibration of the system, measuring and recording of the power is done by a PC automatically. A small polished facet on the shaft protected against oxidation is needed for easy and quick application. In this case the system can be used by technical personnel of supervision boats for monitoring of the engine power at sea in a short time. A third power measurement system determinates the torque by measuring the displacement of two supports clamped on the shaft at a distance of 100 mm. The displacement is measured by a micrometer gauge mounted on one of the supports. Readout of the rotating gauge display is possible taking advantage of stroboscopic effect. The system needs no conditioning of the shaft and can be used by non technicians. The development is not finished until now and some additional investigations and tests are required. Additional measures for monitoring of the power on fishing vessels by self recording power measurement systems and sealed fuel racks with limited injection are reported and discussed.

On the ecology and explorations of the fisheries of an East African rift valley lake, Part 1: On the bionomics and population structure of Tilapia nilotica Linnaeus 1757 in Lake Baringo, Kenya

An ecological survey of the fisheries of Lake Baringo, Kenya was carried out between August, 1972 and August, 1973. The bionomics and population structure of T. nilotica is described. Sampling was done with multifilament gillnets of graded mesh sizes from 51 mm to 178 mm in approximately 12.5 mm increments. The Lake was divided into three sampling and ecologically different zones - the south, central and north zones. The size range of T. nilotica of both sexes caught was between 5 and 27 cm (mode 16 cm) with a mean length of 16.07 cm. For all the collections, males dominated (55.3%) and a higher proportion of males were caught in January, August and November. The smallest mature male and female was 9 and 10 cm respectively. Males grow faster and mature at larger sizes than females. 50% of all males and females mature at 17.4 and 16:4 cm respectively. The periods of intense spawning were between August and October and January to April. The Tilapia were feeding best in central and north zones and the feeding intensity was reduced in January. Two endoparasites Contracaecum sp. and Clinostomum sp. were isolated from the Tilapia. The "condition" of the fish was better in the north than in the other two zones.