Stray current corrosion of copper sheathing and keel cooling pipe of a 36' trawler

The results of investigations into the cause of an accelerated corrosion of copper sheathing and keel cooling pipe of a 36' wooden trawler are reported. The corrosion is attributed to the stray electric currents originating from the electrical wiring system. The sources of stray currents and the remedial measures have been suggested.

Artificial Habitats for Fisheries Enhancement in the Australian Region

This paper outlines developments over about 20 years in the construction of and ecological research on artificial reefs, fish aggregation devices (FAD's), and other artificial habitats designed to enhance fish populations and fisheries in the Australian region (including New Zealand and Papua New Guinea). Work was initially carried out on multicomponent reefs using a variety of waste materials, as well as some specially constructed concrete and steel structures. Later studies concentrated on single-component reefs, again mainly using waste materials. Although no definitive conclusions were reached on the relative effectiveness of the different materials used, waste motor vehicle tires and derelict ships were generally judged to be the best all-around materials for single-component reef construction in sheltered estuarine and offshore marine environments, respectively, in this region. FAD's comprising polyvinylchloride pipe sparbuoys (or in some areas polyurethane foam floats) attached to railroad car wheel anchors by polyethylene rope and chain, and supporting attractor drapes of synthetic mesh webbing, also provedtobegenerallysuccessfulin thisarea. Overall conclusions for the Australian region include the predominant use of waste materials in artificial reef construction, which has been primarily aimed at recreational fisheries enhancement; the successful use of FAD's for both recreational and commercial fisheries enhancement; the need for further and better planned research into and monitoring of the effectiveness of both of these enhancement methods; and the need for future research into the effectiveness of unfished "artificial habitat reserves" in enhancing fisheries production from surrounding fished areas.

South & West Cumberland Fisheries Advisory Committee 13th October, 1975.

This is the report from the South and West Cumberland Fisheries Advisory Committee meeting, which was held on the 13th October 1975. The report contains information on the impact of work on the A66 Penrith to Workington road, brown trout fishing, the development of the Ehen as a fishery, reports of fisheries activities, Holmwrangle hatchery, land drainage representation, new fishery byelaws and fishing licence duties. The section on fisheries activities includes runs of fish, stocking, poaching and biological work. The section on Holmwrangle hatchery includes mortality numbers and possible solutions to avoid future pipe chokes and to improve the pumping system. The section on land drainage is purely for an up-to-date picture of developments. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Lune, Wyre & Furness Fisheries Advisory Committee 20th October, 1975.

This is the report from the Lune, Wyre and Furness Fisheries Advisory Committee meeting, which was held on the 20th October 1975. The report contains information on water resources for the post 1981 period, fisheries activities, protection of fisheries and pipe crossing of the River Leven near Newby Bridge, land drainage representation on local committees, new byelaws and fishing licence duties. The section on fisheries activities looks at poaching, biological work to assess the effects of Frigg-Warrington pipeline, fish mortalities, eels netting, and migratory runs in the River Lune and Leven. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Reproductive biology, artificial propagation and larval rearing of two freshwater eels, Monopterus cuchia and Mastacembelus armatus

Studies on reproductive biology and artificial propagation including larval rearing of freshwater mud eel, Monopterus cuchia and spiny eel, Mastacembelus armatus were attempted. The gonadosomatic index (GSI) of mud eel ranged from 0.41 (August) to 5.52 (June) in males and 0.53 (August) to 7.61 (June) in females. In both cases the GSI showed a peak in June. Fecundity ranged from 228 (TL - 396 mm; W - 78g) to 5510 (TL - 865 mm; W - 630 g). In case of spiny eel, the GSI varied from 0.65 (August) to 8.30 (July) in males and 0.70 (August) to 10.46 (July) in females. GSI showed single peak in July. Fecundity ranged from 570 (TL - 240 mm; W - 30 g) to 10870 (TL - 601; W - 350g). Histology of the testes and ovaries of the eels were carried out to investigate the gonadal development stages during the reproductive months (August to November 2003). In case of male M. cuchia, the secondary primordial germ cells, primary spermatogonium, some spermatogonia A and clone of spermatogonium B in testis were observed in September. In October-males different sized lobules having spermatogonia, spermatocytes and spermatids were observed. In the ovary of M. cuchia, polygonal shaped oocytes were seen during September. The oogonia were reduced with dense and irregular shaped during October. Numerous pycnotic cells were visible during November. In male M. armatus numerous broken lobule walls were found in testes during September. In October, abundant primary germ cells, pycnotic nests of degenerating cells, spermatogonia and spermatids were observed. In females, ovaries had distinct yolk vesicles stage and yolk granules stages in August. In September, the follicular cells of the oogonia were ruptured, shrunk forming irregular shaped in October. Oogonia were also shrunk with thin, irregular shaped structure but broken parts of the ruptured follicular cells were scattered in case of M. armatus. Experimental attempts on artificial propagation indicated that both freshwater eels were difficult to breed using inducing agents like pituitary glands (PG) of 10, 20, 50, 100 and 150 mg per kg of body weight. Same doses were used for both sexes with equal sex-ratio. In both cases, brood fish died at higher doses of injection given at 100 and 150 mg PG/kg bodyweight. However, M. cuchia breed naturally in cisterns when provided with water hyacinths and tunnel in muddy bottom. M. cuchia fed with chopped cooked fish attained a mean weight of 18.75 ± 2.3 g and cent percent survival. While in case of M. armatus best growth by weight (12.0 ± 2.48 g) and cent percent survival were achieved using chopped raw fish. Car tyre was observed as best shelter for attaining the mean weight gain 22.53 ± 2.24 g and cent percent survival of M. cuchia. While PVC pipe was found to be the best shelter for M. armatus, where it attained the mean weight of 12.73 ± 1.88 g and cent percent survival.

Modified water spray chumming system for pole and line fishing of tuna

A water spray chumming system consisting of a 65 x 50 mm centrifugal pump driven by the propulsion engine through a PTO clutch and 'V' pulley power transmission system has been developed for the pole and line fishing of tuna. Water is sprayed through pipe loop system fitted on the edge of the fishing platform of the boat through small holes. The distance of the spray length can be adjusted by controlling the flow of the pump discharge water through a wheel valve.

Technology for the community: SEAFDEC-designed artificial reefs

An account is given of the fabrication and deployment of artificial reefs used in the SEAFDEC/AQD's Community Fishery Resource Management project, which focused on Malalison Island located in west Central Philippines. The project aimed to apply community-based techniques of fishery resource management through the collaboration of community organizations, biologists and social scientists. The 3 types of reefs (building blocks, concrete pipe culvert, and modified concrete pipe culvert) were deployed at Gui-ob reef covering an area of less than 1 ha.

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.