Instrument for the measurement of the fore and aft tilt of otterboards

A portable self-contained instrument has been designed and developed for the measurement of the Fore and Aft tilt of otter boards within the range —22° to + 22° with an accuracy of ± 1°. An underwater transducer fitted on the otter board converts its tilt into corresponding electrical resistance which is measured in an ohmmeter on board, both being connected by electric cable.

Myxobolus aeglefini in Wittlingen (Merlangius merlangus)der Nordsee und der lrischen See

In June 1994 and 1995 stations in the North, Irish, Celtic Seas and the Channel were studied for the occurrence of Myxobolus aeglefini in whiting (Merlangius merlangus). The disease was visible externally as either white nodules of a few millimeters diameter in the upper mouth cavity, gill arches and the basis of pelvic fins and in severe cases also on the lower jaws or in the cornea and sclera of the eye. It was verified morphometrically in histological sections of infected eyes by size and shape of spores. Myxobolus aeglefini was present in low prevalences at two North Sea stations and high prevalences of up to 49 % in the Irish Sea (Solway Firth) during both cruises. Whiting between 23 and 55 cm were found to be infected. Neither length-age prevalences nor condition factors and gonado, spleen, liver somatic indices differed in diseased and healthy fishes.

Description of early life history stages of the northern sculpin (Icelinus borealis Gilbert) (Teleostei: Cottidae)

Larvae of the genus Icelinus are collected more frequently than any other sculpin larvae in ichthyoplankton surveys in the Gulf of Alaska and Bering Sea, and larvae of the northern sculpin (Icelinus borealis) are commonly found in the ichthyofauna in both regions. Northern sculpin are geographically isolated north of the Aleutian Islands, Alaska, which allows for a definitive description of its early life history development in the Bering Sea. A combination of morphological characters, pigmentation, preopercular spine pattern, meristic counts, and squamation in later developmental stages is essential to identify Icelinus to the species level. Larvae of northern sculpin have 35–36 myomeres, pelvic fins with one spine and two rays, a bony preopercular shelf, four preopercular spines, 3–14 irregular postanal ventral melanophores, few, if any, melanophores ventrally on the gut, and in larger specimens, two rows of ctenoid scales directly beneath the dorsal fins extending onto the caudal peduncle. The taxonomic characters of the larvae of northern sculpin in this study may help differentiate northern sculpin larvae from its congeners, and other sympatric sculpin larvae, and further aid in solving complex systematic relationships within the family Cottidae.

Descriptions of larval, prejuvenile, and juvenile finescale menhaden (Brevoortia gunteri) (family Clupeidae), and comparisons to gulf menhaden (B. patronus)

Larval and juvenile development of finescale menhaden (Brevoortia gunteri) is described for the first time by using wild-caught individuals from Nueces Bay, Texas, and is compared with larval and juvenile development of co-occurring gulf menhaden (B. patronus). Meristics, morphometrics, and pigmentation patterns were examined as development proceeded. An illustrated series of finescale menhaden is presented to show changes that occurred during development. For finescale menhaden, transformation to the juvenile stage was completed by 17−19 mm standard length (SL). By contrast, transformation to the juvenile stage for gulf menhaden was not complete until 23−25 mm SL. Characteristics useful for separating larval and juvenile finescale menhaden from gulf menhaden included 1) the presence or absence of pigment at the base of the insertion of the pelvic fins; 2) the standard length at which medial predorsal pigment occurs; 3) differences in the number of dorsal fin ray elements; and, 4) the number of vertebrae.

Larval development of the southern sea garfish (Hyporhamphus melanochir) and the river garfish (H. regularis) (Beloniformes: Hemiramphidae) from South Australian waters

Larval development of the southern sea garfish (Hyporhamphus melanochir) and the river garfish (H. regularis) is described from specimens from South Australian waters. Larvae of H. melanochir and H. regularis have completed notochord flexion at hatching and are characterized by an elongate body with distinct rows of melanophores along the dorsal, lateral, and ventral surfaces; a small to moderate head; a heavily pigmented and long straight gut; a persistent pre-anal finfold; and an extended lower jaw. Fin formation occurs in the following sequence: caudal, dorsal and anal (almost simultaneously), pectoral, and pelvic. Despite the similarities between both species and among hemiramphid larvae in general, H. melanochir larvae are distinguishable from H. regularis by 1) having 58–61 vertebrae (vs. 51–54 for H. regularis); 2) having 12–15 melanophore pairs in longitudinal rows along the dorsal margin between the head and origin of the dorsal fin (vs. 19–22 for H. regularis); and 3) the absence of a large ventral pigment blotch anteriorly on the gut and isthmus (present in H. regularis). Both species can be distinguished from similar larvae of southern Australia (other hemiramphids and a scomberosocid) by differences in meristic counts and pigmentation.

A preliminary account and review of the simple methods for determining the operational parameters of fishing gear, underwater, with notes on its application

An account and review of the simple methods for determining the operational parameters of fishing gear, underwater, such a tilt of otter boards (outwards or inwards, forwards or afterwards), vertical height of net, its horizontal spread, angle of divergence at bosom, spread between wing tips, angle of inclination of danlenos, butterfly, slope of legs and sweep-line has been given. The relationship of distance between the otter boards spread and the vertical height of net has been obtained as generally linear. The possibilities of regulating the vertical height of net (dependent variate) and spread of otter boards (independent variate) for increasing the fishing efficiency has been discussed. The angle of attack of oval shaped otter boards used during the operations still remain undetermined, however, it has been explained how the best angle of attack for increasing the efficiency of gear can be obtained by regulating the ratio of depth to warp for a given net. The inadequacy of the mere indices of catch per hour of trawling in comparing the relative efficiency of trawls in gear research studies has been indicated. The importance of estimating the operational parameters and its application to commercial fisheries depending upon the distribution pattern of fish and in gear research has been discussed. The efficiency of the jelly bottle method has been compared statistically with the observations made on the trawl gear underwater with instruments.

Larval ontogeny of a percichthyid fish, Synagrops philippinensis (Günther) in Kagoshima Bay, southern Japan

The larval ontogeny of a developmental series (1.2-8.3mm body length, BL) of Synagrops philippinensis from Kagoshima Bay, southern Japan is described and illustrated. The yolk was completely absorbed in larva of ≥1.5 mm BL. Notochord flexion commenced at about 3.5mm BL and was completed by about 4.0-4.5mm BL. S. philippinensis larvae were distinguished from their congeners based on melanophore patterns, head spination and fin spines and rays. Larvae of 7.5-8.3 mm BL were characterized by anteriorly serrated pelvic spine, two anal spines, nine inner preopercular spines and no melanophore on lateral side of the caudal peduncle; 7.0 to 7.5mm BL larvae by the above characters except serration on pelvic spine; and yolk-sac, pre-flexion, flexing and post-flexion larvae up to 7.0mm BL by unique melanophores on lower lobe of pectoral finfold/fin.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Early developmental stages of Nandus nandus (Ham.)

In order to study the early developmental stages of Nandus nandus an experiment was conducted, where eggs and milt were obtained from the laboratory reared N nandus by stripping after 15 hours of 150 mg/kg body weight of carp PG extract injection. Then the eggs were fertilized in the laboratory and subsequent developmental stages were studied. First cleavage (two cell), four cell, eight cell, sixteen cell and multi cell stages were found 30, 50, 70, 105 and 160 minutes after fertilization respectively. Morula, early gastrula, middle gastrula, late gastrula and yolk plug stages were found 5, 8, 9, 11 and 13 hours after fertilization respectively. Hatching occurred within 20±2 hours after fertilization, and larvae were measured 1.60 mm in diameter. After one hour of hatching two melanophore bands were found at the caudal region of the body of the larvae. Eyes were first observed in l 0 hours, pectoral and pelvic fin buds appeared in 22 hours and well developed in 38 hours old larvae. Mouth cleft and brain lobes were visible when the larvae were 34 and 38 hours old respectively. Myomeres partially appeared in 16 hours, which were clearly visible in 74 hours old larvae. Larvae started wandering and searching for food after 56 hours of hatching. The yolk sac was completely absorbed when larvae became 62 hours old.

Morphometric characteristics and meristic traits of Tilapia zillii from three major dams of a southwestern state, Nigeria

Tilapia zillii was examined in three major dams in Ekiti State, Nigeria (Ureje dam, Ado, Egbe dam and Ero dam) for their morphometric characteristics and meristic traits. The results showed that the average body weight of the fish sampled were 145.86±50.06g in Ado, 30.19±9.35g in Egbe and 40.58±52.30g in Ero dam. Average total lengths were 21.29±3.20cm, 12.32±1.74cm and 11.24±1.56cm for Ado, Egbe and Ero dam respectively. The relationship between average weight and length of T. zillii showed that Y=15.202X-179.33 (R2=0.7181), Y=4.40049±-24.075 (R2=0.6708) and Y=2.6676X10.596 (R2=0.0063) for Ado, Egbe and Ero dam respectively. The results on headlength, total length, body weight and standard length and pre-pelvic distance are significantly different at 95% among the T.zillii of the three dams. There was no significant difference in the meristic traits of the T. zillii of the three dams. The population size of T.zillii in the three dams was just too small compared to other species of fish hence the need to assess the stock of fish in these dams critically for the encouragement of proper fishing activities in these dams.

Optomotor reaction of milkfish larvae and juveniles

The development of the optomotor reaction (OMR) in milkfish (Chanos chanos), from the larval, through the metamorphic, to the juvenile stage was observed. The period from the appearance of the pelvic fins until the complete disappearance of the finfold was named ”metamorphic stage”. While the larvae showed strong rheotactic responses, their OMR was somewhat weak. It was clear that the OMR underwent a big change through the metamorphic stage, and became strong and almost perfect in the juveniles.