Efficiency of two designs of trawls in Hirakud Reservoir

High opening trawl was found to be effective for the exploitation of bottom and off bottom fishes from Hirakud reservoir compared to bulged belly trawl.

Extent of trial of improved designs of lobster traps

The mean extent of trial of an improved design of lobster trap by 45 fishermen was 26.46. The cost of local traps and number of seasons used were both significantly negatively associated with the extent of trials; its relationship with the annual catch by indigenous trap approached significance. These three variables accounted for 59% of the variance in the extent of trial.

A scientific forum on the Gulf of Mexico: The Islands in the Stream Concept. Proceedings of the Forum: 23 January 2008, Keating Education Center, Mote Marine Laboratory, Sarasota, Florida

The Scientific Forum on the Gulf of Mexico: The Islands in the Stream Concept took place in January 2008 in Sarasota, Florida. The purpose of the meeting was to bring together scientists and managers from around the Gulf of Mexico to discuss a range of topics on our knowledge of the Gulf of Mexico, from its geology to larger-scale connectivity to the Caribbean region, and their applications to the concept of a more integrated approach to area-based management. The forum included six panels of invited experts who spoke on the oceanographic and biological features in the Gulf of Mexico, including connections with Mexico and the Mesoamerican barrier reef system, and the legal and regulatory structure currently in place. The charge to the group was to share information, identify gaps in our knowledge, identify additional potential areas for protection, and discuss available science about connectivity and the potential value of establishing a marine protected area network in the Gulf of Mexico. (PDF has 108 pages.)

Ecological factors related to the distribution of Bankia gouldi Bartsch in Chesapeake Bay

Organisms were collected on test panels, six inch lengths of dressed two by four inch pine, suspended in the water in a vertical position as described by Turner (1947). The panels were usually located at some convenient structure such as a dock-piling or sea-wall. Except where otherwise indicated by the data, the samples were collected from each station once a month between May 1950 and May 1953. During the three year period, seven hundred and nineteen panels were submerged in Chesapeake Bay. Approximately 14,000 organisms were encountered on these panels of which 20% or approximately 3,000 organisms could be identified from the dried pallets. Preliminary notes on the extent of fouling were made in the field after which the samples were removed to the laboratory for further study.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Comparative efficiencies of mechanized fishing crafts introduced in India

India started mechanization of fishing craft in early 1950. The traditional craft was subjected to technical scrutiny and some of them mechanized with good results. However, due to limitations inherent in the traditional craft, it was found necessary to develop new series of crafts suitable for the operation of modern fishing gears in areas hitherto unexplored. The impetus given to the development of infrastructure like freezing, canning and ice plants, and quickly expanding export market, increased the demand for marine products, hence craft for immediate, as well as long-term needs had to be introduced. In this article the author discusses design of fishing vessels, information from experience used in development of vessels, designs of distant water vessels, productivity studies, income and expenditure, economic values, production cost, and productivity.

Quality assessment of rotating and solar tunnel dried marine fish product

Studies were conducted to evaluate the quality aspects of marine dried fish i.e. silver jew fish (Johnius argentatus), Bombay duck (Harpodon nehereus) and ribbon fish (Trichiums haumela) products produced in rotating and solar tunnel dryers. On the basis of organoleptic characteristics such as colour, odour, texture, broken pieces, insect infestation and overall quality, four member panels of experts evaluated the quality of the dried products obtained from both rotating and solar tunnel dryers and all the products were found in acceptable quality. Reconstitutions properties of samples were in the range of 51.05 to 98.75% for the dried fish produced in rotating dryer, while 24.64 to 76.76% for dried fish produced in solar tunnel dryer. The highest reconstitution rate was found in dried silver jew fish and lowest in ribbon fish produced in rotating dryer. On the other hand, the highest reconstitution was observed in dried silver jew fish and lowest in dried Bombay duck produced in solar tunnel dryer. Proximate composition such as moisture, crude protein, lipid and ash content of the dried fish muscles produced in rotating dryer ranged from 16.36% to 19.1%, 62.35% to 67.37%, 6.37% to 10.75% and 7.00% to 8.05%, respectively and in solar tunnel dried fish products, they were in the range of 14.05% to 19.71%,57.64% to 69. 21%,6.92% to 15.40%and 7.69% to 8.80 %, respectively. The TVBN values of dried fish products obtained from rotating dryer were in the range of 15.02 to 19.05 mg/100g, while in solar tunnel dried fish products, the values were in the range of 15.46 to 19.21 mg/100g. The results of the studies indicated that dried fish produced from both rotating and solar tunnel drier were acceptable quality in terms of organoleptic and food quality aspects.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

Microsatellite multiplex panels for genetic studies of gray snapper (Lutjanus griseus) and lane snapper (Lutjanus synagris)

Microsatellites are codominantly inherited nuclear-DNA markers (Wright and Bentzen, 1994) that are now commonly used to assess both stock structure and the effective population size of exploited fishes (Turner et al., 2002; Chistiakov et al., 2006; Saillant and Gold, 2006). Multiplexing is the combination of polymerase chain reaction (PCR) amplification products from multiple loci into a single lane of an electrophoretic gel (Olsen et al., 1996; Neff et al., 2000) and is accomplished either by coamplification of multiple loci in a single reaction (Chamberlain et al., 1988) or by combination of products from multiple single-locus PCR amplifications (Olsen et al., 1996). The advantage of multiplexing micro-satellites lies in the significant reduction in both personnel time (labor) and consumable supplies generally required for large genotyping projects (Neff et al., 2000; Renshaw et al., 2006).

Development of lobster traps: preliminary experiments with three new designs of rectangular, Australian pot and ink-well traps

Result of experimental lobster fishing with three new designs, namely rectangular, Australian pot and ink-well traps at Muttam, Kadiapatnam, Colachal, Enayam and Vizhinjam, south-west coast of India during 1979-80 are reported. Preliminary studies show that Australian pot and rectangular traps as more efficient to the ink-well type.

Adoption of CIFT fishing boat designs

Information about the adoption of CIFT fishing boat designs was collected from 54 boat building yards of the country. The majority of the boats were built as per CIFT designs. The types of wood used and the designs were dependent upon each other. Other variables studied did not show significant effects upon the type of adoption. The CIFT designs were modified at some yards and these details are discussed.