Effect of fish meal in formulated diet on the growth of Heterotis niloticus in semi-intensive pond culture system

The aim of the investigation is to know the percentage of fish meal required to support the best growth of Heterotis niloticus in a semi intensive pond culture system. To achieve this, feed was formulated with equal percentages of blood meal, and corn meal and varying levels of fish meal. The experiment was in four treatments. Results showed that the mean weight gained was directly proportional to the quantity of fish meal made available to the fish fence 31.58g, 33.79g, 45.15g and 51.24g were recorded for treatments I, II, III and IV respectively. Result from this study when compared with previous works, shows that size of the water body to a greater extent affects the growth. The availability of fish meal in the feed made it more acceptable to the fish and hence a commensurate conversion in to flesh. The analysis of variance showed that there is significant difference in the growth performance in the treatments

Behavior ecology of the Humboldt squid, Dosidicus gigas: insights from an animal-borne video and data logging system

Dosidicus gigas is a large pelagic cephalopod of the eastern Pacific that has recently undergone an unexpected, significant range expansion up the coast of North America. The impact that such a range expansion is expected to have on local fisheries and marine ecosystems has motivated a thorough study of this top predator, a squid whose lifestyle has been quite mysterious until recently. Unfortunately, Dosidicus spends daylight hours at depths prohibitive to making observations without significant artificial interference. Observations of this squid‟s natural behaviors have thus far been considerably limited by the bright illumination and loud noises of remotely-operated-vehicles, or else the presence of humans from boats or with SCUBA. However, recent technological innovations have allowed for observations to take place in the absence of humans, or significant human intrusion, through the use of animal-borne devices such as National Geographic‟s CRITTERCAM. Utilizing the advanced video recording and data logging technology of this device, this study seeks to characterize unknown components of Dosidicus gigas behavior at depth. Data from two successful CRITTERCAM deployments reveal an assortment of new observations concerning Dosidicus lifestyle. Tri-axial accelerometers enable a confident description of Dosidicus orientation during ascents, descents, and depth maintenance behavior - previously not possible with simple depth tags. Video documentation of intraspecific interactions between Dosidicus permits the identification of ten chromatic components, a previously undescribed basal chromatic behavior, and multiple distinct body postures. And finally, based on visualizations of spermatophore release by D. gigas and repetitive behavior patterns between squid pairs, this thesis proposes the existence of a new mating behavior in Dosidicus. This study intends to provide the first glimpse into the natural behavior of Dosidicus, establishing the groundwork for a comprehensive ethogram to be supported with data from future CRITTERCAM deployments. Cataloguing these behaviors will be useful in accounting for Dosidicus‟ current range expansion in the northeast Pacific, as well as to inform public interest in the impacts this expansion will have on local fisheries and marine ecosystems.

Food preference and intake pattern of Penaeus monodon (Fab.) in semi-intensive culture system

P. monodon juveniles prefer natural food than artificial feed in their initial stage of rearing. However, the percentage preference towards artificial feed increases as the days of culture/average body weight increases. Consumption of artificial feed was high during evening meal (1700h) and low during night meal (2200h). The index of intestine fullness was high (8.4±0.7) during initial stage of rearing, compared to that of final stage of rearing (4.9±0.4), probably due to low nutritional value of intake material and low water depth at initial stage. At all stage of rearing omnivorous feeding habit was established and no evidence of diet periodicity in feeding activity was observed.

Effect of stocking density on growth and yield of GIFT tilapia under rice-fish production system

The study was conducted at the Central Experimental Station, Philippine Rice Research Institute, Maligaya, Science City of Munoz, Nueva Ecija, Philippines during the wet season to determine the suitable stocking density(s) for better growth and yield of fish under rice-fish production systems. Recovery rate of GIFT tilapia in different stocking densities ranged from 75.74 to 83.47%. Among different treatments, rice +5,000 fingerlings/ha and rice +10,000 fingerlings/ha resulted in the highest recovery rate of 83.33% and 83.47%, respectively. The lowest recovery rate of 75.75% was obtained from rice +20,000 fingerlings/ha, but similar to that was obtained (78.56%) from rice +15,000 fingerlings/ha. Significantly higher rate of gain in body weight and that of specific growth rate were recorded in the treatment from rice +5,000 fingerlings/ha, while other treatments resulted in similar absolute and specific growth rate. Fish yield increased significantly with relatively higher stocking densities, but higher densities produced maximum number of smaller fishes and also lower recovery rate.

Effects of different levels of energy and protein sources on the growth performance, feeding, survival rate and the chemical body composition of juvenile Pacific white shrimp (Litopenaeus vannamei)

The present study was carried out in order to establish an economical effective diet for the pacific white shrimp in the southern part conditions of Iran. With the consideration of three dietary energy levels (E1=262, E2=312, E3=362 kcal 100 g-1 diet) and six ratios of fish meal (FM) to soybean meal (SBM) [(P1=100%FM+0%SBM, P2=80%FM+20%SBM, P3=60%FM+40%SBM, P4=40%FM+60%SBM, P5=20%FM+80%SBM, P6=0%FM+100%SBM)], 18 experimental diets (with 36% crude protein) were prepared. Completely randomized design was used to assign 54 polyethylene 300 litre round tanks provided by aeration and flow through water system and was stocked by 19 juvenile as 3 replicates to each treatment. Shrimps average weight was about 0.77 grams at the start. After 56 days culture period, maximum growth and nutritional performances were observed in the P6E1 treatment (containing 100% soybean meal and 262 kcal 100 g-1 diet) and P5E1 treatment (containing 80% soybean meal and 262 kcal 100 g-1 diet). Also the highest survival rate of the shrimps was observed in the P1E1, P1E2, P3E3 and P5E3 treatments. Additionally interactive effect of different protein ratios and energy levels had significant difference on body protein, fat, fiber and ash contents (P<0.05). Results of the present study suggest the possibility replacement of at least 80% of dietary fish meal by soybean meal in the diet of pacific white shrimp in the conditions of southern part of Iran.

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.