7 resultados para Multi-instance and multi-sample fusion
em Aquatic Commons
Resumo:
For most fisheries applications, the shape of a length-frequency distribution is much more important than its mean length or variance. This makes it difficult to evaluate at which point a sample size is adequate. By estimating the coefficient of variation of the counts in each length class and taking a weighted mean of these, a measure of precision was obtained that takes the precision in all length classes into account. The precision estimates were closely associated with the ratio of the sample size to the number of size classes in each sample. As a rule-of-thumb, a minimum sample size of 10 times the number of length classes in the sample is suggested because the precision deteriorates rapidly for smaller sample sizes. In absence of such a rule-of-thumb, samplers have previously under-estimated the required sample size for samples with large fish, while over-sampling small fish of the same species.
Resumo:
This report describes the proximate compositions (protein, moisture, fat, and ash) and major fatty acid profiles for raw and cooked samples of 40 southeastern finfish species. All samples (fillets) were cooked by a standard procedure in laminated plastic bags to an internal temperature of 70'C (lS8'F). Both summarized compositional data, with means and ranges for each species, and individual sample data including harvest dates and average lengths and weights are presented. When compared with raw samples, cooked samples exhibited an increase in protein content with an accompanying decrease in moisture content. Fat content either remained approximately the same or increased due to moisture loss during cooking. Our results are discussed in reference to compositional data previously published by others on some of the same species. Although additional data are needed to adequately describe the seasonal and geographic variations in the chemical compositions of many of these fish species, the results presented here should be useful to nutritionists, seafood marketers, and consumers.(PDF file contains 28 pages.)
Resumo:
Length-weight relationship parameters of Heterobranchus longifilis males, females and combined sexes are given. The samples were collected from Idodo River, with size ranging from 123 mm total length, L, to 936 mm L. The values obtained for the mean L by sex show that males were significantly (p<0.05) larger than females. The results show that the slope (b) is significantly (p<0.05) below 3.0 for the male, female and pooled sample. The species exhibit a negative allometric growth pattern. The relative condition of fish shows seasonal variation, with females generally being in better condition than the males.
Resumo:
A mail survey of tournament shark anglers and party boat shark anglers was completed to examine their fishing activity, attitudes, trip expenditures, and consumer surplus. A sample of 700 shark anglers was selected from tournaments in the Gulf of Mexico during 1990, and a sample of party boat shark anglers was drawn from Port Aransas, Tex., party boat anglers during the summer of 1991. A response rate of 58% (excluding nondeliverables) was obtained from tournament anglers. The sample of party boat shark anglers was too small to provide useful results. Tournament shark anglers reported fishing an average of 58 days per year and targeted sharks and other large marine species. Tournaments occupy a small portion of their fishing effort. If this group of anglers were not able to fish for sharks, one-third indicated no other species would be an acceptable substitute, while others were willing to substitute other large marine species. Shark trip expenditures averaged $197 per trip with a consumer surplus of $111 per trip. Based on MRFSS estimates of the number of shark fishing trips, we estimate a total of $43,355,000 was spent by shark anglers in the Gulf of Mexico with a consumer surplus of $23,865,000 for a total gross value of the shark fishery of $66,220,000. MRFSS estimates of the number of sharks landed indicate an equivalent use value of $183 per shark.
Resumo:
The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.
Resumo:
The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.
Resumo:
Population assessments seldom incorporate habitat information or use previously observed distributions of fish density. Because habitat affects the spatial distribution of fish density and overall abundance, the use of habitat information and previous estimates of fish density can produce more precise and less biased population estimates. In this study, we describe how poststratification can be applied as an unbiased estimator to data sets that were collected under a probability sampling design, typical of many multispecies trawl surveys. With data from a multispecies survey of juvenile flatfish, we show how poststratification can be applied to a data set that was not collected under a probability sampling design, where both the precision and the bias are unknown. For each of four species, three estimates of total abundance were compared: 1) unstratified; 2) poststratified by habitat; and 3) poststratified by habitat and fish density (high fish density and low fish density) in nearby years. Poststratification by habitat gave more precise and (or) less design-biased estimates than an unstratified estimator for all species in all years. Poststratification by habitat and fish density produced the most precise and representative estimates when the sample size in the high fish-density and low fish-density strata were sufficient (in this study, n≥20 in the high fish-density stratum, n≥9 in the low fish-density stratum). Because of the complexities of statistically testing the annual stratified data, we compared three indices of abundance for determining statistically significant changes in annual abundance. Each of the indices closely approximated the annual differences of the poststratified estimates. Selection of the most appropriate index was dependent upon the species’ density distribution within habitat and the sample size in the different habitat areas. The methods used in this study are particularly useful for estimating individual species abundance from multispecies surveys and for retrospective st