Fishers’ perception on livelihood strategies, adaptation and mitigation measures to cope with changes in climate variables around Lake Wamala, Uganda

Fisheries support livelihoods but are threatened by climate variability and change which intensified since the 1970s. This study used quantitative and qualitative methods to determine the extent to which fishers around Lake Wamala in Uganda were copying with perceived changes in climate variables and the impacts on their livelihoods, to generate knowledge to enable the fishers increase resilience and sustain their livelihoods. Fishers were aware of changes in climate manifested by unpredictable seasons, floods and droughts. Fishing was the main livelihood activity. The African catfish had replaced Nile tilapia as the dominant fish species. There was damage and loss of gear, boats, landing sites and lives, and changes in fish catches and sizes, income and fish consumption during the perceived floods and droughts. The fishers adapted to the changes through increasing time on fishing grounds and changing target species and fishing gears but innovative ones diversified to high value crops and livestock which increased their income beyond what was earned from fishing thus acting as an incentive for some of them to quit fishing. Diversification to non-fishery activities as a form of adaptation was enhanced by membership to social groups, weekly fishing days, fishing experience and age of fishers but its benefits were not equally shared among men and women. Mitigation measures included planting trees, mulching gardens and protecting wetlands. Adaptation and mitigation measures were constrained by limited credit, awareness and land. The required interventions included improving access to credit, irrigation facilities and appropriate planting materials and raising awareness. The study showed that the fishers were aware of changes in climatic variables and the impacts on their livelihoods. There were also adaptation and mitigation measures practiced by the fishers which if promoted and their constraints addressed, could increase resilience of fishers to climatic change and sustain their livelihoods.

Climate change and fisheries: perspectives from small-scale fishing communities in India on measures to protect life and livelihood

Through consultations with key fisheries-based stakeholders in four States of India, this study attempts to assess perceptions of fishing communities about the impact of climate change on their lives and livelihoods. It also evaluates the traditional knowledge, institutions and practices of fishing communities that are relevant to climate-change preparedness. The study identifies adaptation and mitigation measures that may need to be adopted by fishing communities and the State in relation to climate change. Based on this overall analysis, the study proposes measures to protect the lives and livelihoods of small-scale fishing communities in the context of climate-change policies and programmes at different levels. This study will be useful for researchers, policymakers, students and anyone interested in climate change and its potential effects on the lives and livelihoods of small-scale fishing communities.

Effects of commercial fishing regulations on stranding rates of bottlenose dolphin (Tursiops truncatus).

Fisheries management actions taken to protect one species can have unintended, and sometimes positive, consequences on other species. For example, regulatory measures to reduce fishing effort in the winter gillnet fishery for spiny dogfish (Squalus acanthias) off North Carolina (NC) also led to decreases in the number of bycaught bottlenose dolphins (Tursiops truncatus). This study found that a marked decrease in fishing effort for spiny dogfish in NC also corresponded with a marked decrease in winter stranding rates of bottlenose dolphins with entanglement lesions (P= 0.002). Furthermore, from 1997 through 2002, there was a significant positive correlation (r2 = 0.79; P= 0.0003) between seasonal bycatch estimates of bottlenose dolphins in gill nets and rates of stranded dolphins with entanglement lesions. With this information, stranding thresholds were developed that would enable the detection of those increases in bycatch in near real-time. This approach is valuable because updated bycatch estimates from observer data usually have a time-lag of two or more years. Threshold values could be used to detect increases in stranding rates, triggering managers immediately to direct observer effort to areas of potentially high bycatch or to institute mitigation measures. Thus, observer coverage and stranding investigations can be used in concert for more effective fishery management.

Waste minimisation in fishing operations

Sources of wastes in fishing operations mainly include bycatch discards; processing wastes where catch is processed onboard; plastic wastes due to abandoned, lost and discarded fishing gear; bilges and other wastes from the vessel operations. Fishing systems in general have an associated catch of nontargeted organisms known as bycatch. Non-selective fishing gear that is not modified or equipped to exclude non-targeted organisms, may take a significant quantity of bycatch of non-targeted finfish, juvenile fish, benthic animals, marine mammals, marine birds and vulnerable or endangered species that are often discarded. Average annual global discards, has been estimated to be 7.3 million t, based on a weighted discard rate of 8%, during 1992-2001 period. Trawl fisheries for shrimp and demersal finfish account for over 50% of the total estimated global discards. Plastic materials are extensively used in fisheries, owing to their durability and other desirable properties, contributing to the efficiency and catchability of the fishing gear. However, plastics biodegrade at an extremely slow rate compared to other organic materials. Abandoned, lost or otherwise discarded fishing gear (ALDFG) and related marine debris have been recognized as a critical problem in the marine environment and for living marine resources. Prevention of excess fishing capacity by appropriate management measures could lead to enormous savings in terms of fuel consumption, emissions and bycatch discards from the excess fishing fleet, capital and operational investments and labour deployment in capture fisheries, with significant economic gains. In this paper, wastes originating from fishing operations are reviewed, along with their environmental impacts and possible mitigation measures

Life after Catch and Release

Since 1988 regulations have required U.S. longline fishermen to release all Atlantic white marlin, Tetrapturus albidus. By the late 1990’s, approximately 99% of Atlantic white marlin caught by U.S. recreational fishermen were released. Recent studies using PSAT technology indicate that not all released fish survive and that a minor change in hook type, 0–5° offset circle hooks rather than straight-shank “J” hooks, may have a profound effect on post release mortality. Beginning in 2004, sea turtle mitigation measures have required U.S. longline fishermen to use circle hooks. Estimates of total catch, releases, and post release mortality of Atlantic white marlin caught by U.S. recreational fishermen were made in order to evaluate the potential reduction in mortality that may be realized by requiring the use of circle hooks rather than straight-shank “J” hooks by U.S. recreational fishermen. These estimates were compared to estimates of Atlantic white marlin caught by the U.S. longline fishery

Measures of Plant Surface-areas for Eurasian Watermilfoil and Water Stargrass

Plant surface areas were measured from samples of two common submersed aquatics with widely diverging morphologies: Eurasian watermilfoil ( Myriophyllum spicatum L.) and water stargrass ( Heteranthera dubia (Jacq.) MacM.). Measures for the highly dissected leaves of Eurasian watermilfoil involved development of a regression equation relating leaf length to direct measures of a subsample of leaf parts. Measures for the simple leaves of the stargrass were sums of measured triangles. Stem surfaces for both species were calculated as measured cylinders. Though the means of the stem length and leaf length were larger for stargrass samples, their mean surface area was 95 cm 2 which was less than the 108 cm 2 recorded for Eurasian watermilfoil samples. Relating surface area to dry weight for the stargrass was straightforward, with 1 mg of dry weight yielding an average 0.678 cm 2 of surface area. Biomass measures for the water milfoil were confounded by the additional weight of epiphytic algae persisting on cleaned samples. The results suggest that a lesstime consuming method for surface area measures of plants with highly dissected leaves and a caveat for using biomass measures to estimate surface area in such plants.

Stock assessment of protogynous fish: evaluating measures of spawning biomass used to estimate biological reference points

In stock assessments, recruitment is typically modeled as a function of females only. For protogynous stocks, however, disproportionate fishing on males increases the possibility of reduced fertilization rates. To incorporate the importance of males in protogynous stocks, assessment models have been used to predict recruitment not just from female spawning biomass (Sf), but also from that of males (Sm) or both sexes (Sb). We conducted a simulation study to evaluate the ability of these three measures to estimate biological reference points used in fishery management. Of the three, Sf provides best estimates if the potential for decreased fertilization is weak, whereas Sm is best only if the potential is very strong. In general, Sb estimates the true reference points most closely, which indicates that if the potential for decreased fertilization is moderate or unknown, Sb should be used in assessments of protogynous stocks. Moreover, for a broad range of scenarios, relative errors from Sf and Sb occur in opposite directions, indicating that estimates from these measures could be used to bound uncertainty.

A study of measures of population density and of concentration of fishing effort in the fishery for yellowfin tuna, Neothunnus macropterus, in the Eastern Tropical Pacific Ocean, from 1951 to 1956

ENGLISH: This study shows how the catch and effort statistics, from 1951 to 1956, of the fishery for yellowfin tuna, Neothunnus macropterus, in the Eastern Tropical Pacific Ocean, have been used to compute: (i) two indices of average population density; (ii) an index of concentration of effort on areas of greatest density of available yellowfin. These three indices were then used to determine: (i) quarterly and annual variation in each of them; (ii) the relationship between the two indices of density; (iii) the relationship of each of the indices to the number of exploited one-degree rectangles. To remove extreme sampling variation at low levels of effort, the data from all one-degree rectangles subjected to less than five logged days' fishing in a quarter were eliminated, and the computations were repeated for comparison with those of the original data. SPANISH: Este estudio da a conocer cómo las estadísticas sobre la pesca y el esfuerzo de pesca de la pesquería del atún aleta amarilla, Neothunnus macropterus, en el Océano Pacífico Oriental Tropical, durante 1951 a 1956, han servido para computar: (i) dos índices del promedio de la densidad de la población; (ií) un índice de la concentración del esfuerzo en las áreas de mayor densidad de atún aleta amarilla disponible. Estos tres índices han sido luego usados para determinar: (i) la variación trimestral y anual en cada uno de ellos; (ií) la relación entre los dos índices de densidad; (iii) la relación de cada uno de los índices con el número de rectángulos de un grado explotados. Para evitar la extrema variación del muestreo a bajos niveles de esfuerzo, se eliminaron los datos de todos los rectángulos de un grado sujetos a menos de cinco días de actividad pesquera durante un trimestre según los registros de los cuadernos de bitácora, y las computaciones se repitieron para compararlas con las de los datos originales.

Measures of population density and concentration of fishing effort for yellowfin and skipjack tuna in the eastern Tropical Pacific Ocean 1951-1959

ENGLISH: In a previous Bulletin of this Commission, Griffiths (1960) discussed two indices of population density and an index of concentration of fishing effort of bait boats for yellowfin tuna in the Eastern Tropical Pacific for the 1951-1956 period. Yellowfin and skipjack tuna occur in the same general fishing areas and many of the commercial catches are composed of a mixture of the two species. It is desirable, therefore, to extend the investigation to skipjack and to the two species combined. SPANISH:En un Boletín anterior de esta Comisión, Griffiths (1960) se refiere a dos índices de la densidad de la población y a un índice de la concentración del esfuerzo de pesca de los barcos de carnada sobre el atún aleta amarilla en el Pacífico Oriental Tropical, correspondientes al período 1951-1956. Los atunes aleta amarilla y barrilete se encuentran en las mismas áreas generales de pesca y muchas de las pescas comerciales están compuestas de una mezcla de las dos especies. Es deseable, por lo tanto, ampliar la investigación en lo que se refiere al barrilete y a las dos especies combinadas.

State of Technology for In Situ Measures of Salinity Using Conductive Temperature Sensors, Savannah, Georgia, December 3-5, 2007: workshop proceedings

This Alliance for Coastal Technologies (ACT) workshop was convened to assess the availability and state of development of conductivity-temperature sensors that can meet the needs of coastal monitoring and management communities. Rased on the discussion, there are presently a number of commercial sensor options available, with a wide range of package configurations suitable for deployment in a range of coastal environments. However, some of the central questions posed in the workshop planning documents were left somewhat unresolved. The workshop description emphasized coastal management requirements and, in particular, whether less expensive, easily deployed, lower-resolution instruments might serve many management needs. While several participants expressed interest in this class of conductivity-temperature sensors, based on input from the manufacturers, it is not clear that simply relaxing the present level of resolution of existing instruments will result in instruments of significantly lower unit cost. Conductivity-temperature sensors are available near or under the $1,000 unit cost that was operationally defined at the workshop as a breakpoint for what might be considered to be a "low cost" sensor. For the manufacturers, a key consideration before undertaking the effort to develop lower cost sensors is whether there will be a significant market. In terms of defining "low cost," it was also emphasized that the "life cycle costs" for a given instrument must be considered (e.g., including personnel costs for deployment and maintenance). An adequate market survey to demonstrate likely applications and a viable market for lower cost sensors is needed. Another topic for the workshop was the introduction to the proposed ACT verification for conductivity-temperature sensors. Following a summary of the process as envisioned by ACT, initial feedback was solicited. Protocol development will be pursued further in a workshop involving ACT personnel and conductivity-temperature sensor manufacturers.[PDF contains 28 pages]

Measures of turbidity in coastal waters, Coconut Island, Oahu, Hawaii, August 31 - September 2, 2005: workshop proceedings

A three day workshop on turbidity measurements was held at the Hawaii Institute of Marine Biology from August 3 1 to September 2, 2005. The workshop was attended by 30 participants from industry, coastal management agencies, and academic institutions. All groups recognized common issues regarding the definition of turbidity, limitations of consistent calibration, and the large variety of instrumentation that nominally measure "turbidity." The major recommendations, in order of importance for the coastal monitoring community are listed below: 1. The community of users in coastal ecosystems should tighten instrument design configurations to minimize inter-instrument variability, choosing a set of specifications that are best suited for coastal waters. The IS0 7027 design standard is not tight enough. Advice on these design criteria should be solicited through the ASTM as well as Federal and State regulatory agencies representing the majority of turbidity sensor end users. Parties interested in making turbidity measurements in coastal waters should develop design specifications for these water types rather than relying on design standards made for the analysis of drinking water. 2. The coastal observing groups should assemble a community database relating output of specific sensors to different environmental parameters, so that the entire community of users can benefit from shared information. This would include an unbiased, parallel study of different turbidity sensors, employing a variety of designs and configuration in the broadest range of coastal environments. 3. Turbidity should be used as a measure of relative change in water quality rather than an absolute measure of water quality. Thus, this is a recommendation for managers to develop their own local calibrations. See next recommendation. 4. If the end user specifically wants to use a turbidity sensor to measure a specific water quality parameter such as suspended particle concentration, then direct measurement of that water quality parameter is necessary to correlate with 'turbidity1 for a particular environment. These correlations, however, will be specific to the environment in which they are measured. This works because there are many environments in which water composition is relatively stable but varies in magnitude or concentration. (pdf contains 22 pages)

Measures of tuna abundance from purse-seine operations in the Eastern Pacific Ocean, adjusted for fleet-wide evolution of increased fishing power, 1960-1971

ENGLISH: The fishing power of the tuna purse-seine fleet of the eastern Pacific Ocean has increased since the early 1960's. Because the entire fleet seems to have adopted equipment and techniques to increase its efficiency in capturing tunas, traditional methods of adjusting catch rates to a reference vessel type of fixed efficiency to index tuna abundance from fishing success are inapplicable. Instead, a methodology for such adjustment based on a mathematical representation of purse seining activities is developed. Observed changes in efficiency in subprocesses of purse seining are then used to adjust catch rates when computing abundance histories for yellowfin and skipjack in large regions of the eastern Pacific Ocean. SPANISH: La eficacia de pesca de la flota de cerco atunera en el Océano Pacífico oriental ha aumentado desde el comienzo del decenio de 1960. Como toda la flota parece haber adoptado equipo y métodos para incrementar su eficaciaen capturar atunes, no se pueden aplicar los métodos tradicionales de ajustar los índices de captura a un tipo normalizado de barco (es decir de eficacia fija) para indicar la abundancia del atún según los resultados de pesca. En su lugar se ha desarrollado un método para realizar tal ajuste basado en una representación matemática de las actividades de las embarcaciones de cerco. Cuando se calcula la abundancia histórica del atún aleta amarilla y barrilete en grandes regiones del Océano Pacífico oriental, se usan entonces los cambios observados en la eficacia de los subprocesos cerqueros para ajustar los índices de captura. (PDF contains 120 pages.)

Compensating restrictive fisheries management measures: distribution of improved cocks to Kainji Lake communities 1997-2001

The Nigeria-German Kainji Lake Fisheries Promotion Project (KLFPP) promoted the distribution of genetically improved cocks to the Kainji Lake (Nigeria) fishing communities aiming to compensate for possible short-term income losses due to the implementation of fisheries management measures restricting the use of the Lake's resources and to provide alternative sources for income generation, especially for the women. Out of 5,075 cocks produced, 4,171 cocks were distributed at subsidized prices mainly to women in 116 fishing villages of Kainji Lake. During an impact survey carried out in 12 villages, 6-24 months after distribution, only 25% of the cocks distributed were seen. However, potential income for each beneficiary from the hybrid offspring was estimated at minimum 1,000 Naira per year

Enforcement of associated protected measures in particularly sensitive sea areas

The distinguished character of Particularly Sensitive Sea Areas (PSSAs) is that every application for PSSAs must be accompanied by Associated Protected Measures (APMs) which can make PSSAs efficient in practice.1 That is why APMs are regarded as the core feature of every PSSA.2 APM is “an international rule or standard that falls within the purview of an international maritime organization (IMO) and regulates international maritime activities for the protection of the area at risk.” So far, APMs have been approved by IMO as following: -Compulsory or recommended pilotage -Mandatory ship reporting -An area to be avoided -Traffic separation schemes -Discharge prohibition or regulations -Mandatory no anchoring areas -Deep water routes -Emission control areas (PDF contains 5 pages)