10 resultados para Mining and Construction Automation
em Aquatic Commons
Resumo:
The maintenance of adequate dissolved oxygen level is very important in the economy of any aquaculture system. An easy to construct aerating device was created using 0.5 hp water-pump, shower rose, Styrofoam, and rubber hose. The aerator works by drawing water from below and discharging it into the atmosphere as a spray. The spray is aerated as it splashes into the water surface. The aerating device has an average spray of 1.2 unit and doubles the dissolved oxygen content of 37.8 m super(3) tank in one hour
Resumo:
The findings are presented of a search conducted on traditional fishing gear design and construction using the ASFA database (1971-90) and the ICLARM Library and professional staff collections.
Resumo:
The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.
Resumo:
Fishing boats and canoes varied very little in Uganda from the middle of the 19th century umil 1949. types in use being the Dug Out Canoe. up to 40 ft. in length with 4 ft. beam hollowed from trees, and "Sesse" canoes which were used on Lake Victoria; these had an obvious Arab influence. The length of the "Sesse" in recent years as from about 1912 is 28 ft., and it is used as an open fishing craft.
Resumo:
The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.
Resumo:
As part of an overall desire to maintain and improve the migratory salmonid population in the River Wyre, a project was commissioned to investigate remedial action which may improve and enhance spawning success and lead to an eventual improvement in the status of adult stocks. The report, titled "River Wyre Salmon and Sea Trout Spawning Habitat Restoration/Creation Project", concluded that usable spawning gravels appeared to be in short supply in the River Wyre catchment and may be the limiting factor influencing the returning adult stock, as juvenile nursery habitat was not found to be limiting. This report looks at gravel enhancement schemes to improve River Wyre salmon and sea trout spawning habitat restoration. It examines methods for gravel enhancement schemes: mechanical cleaning and construction of gravel addition structures. Includes sites figures of sites identified for enhancement.
Resumo:
The deteriorating condition of one of the most magnificent lakes of India, the Dal Lake, has provoked a lot of research interest from the biological and ecological points of view. However, the impact of deterioration of the ecology on the inhabitant fisher folk around Dal Lake has not been given much importance. In this study, the three major beats of the lake, namely, Hazratbal, Nishat and Nehru Park, were surveyed, randomly taking 10% of the fishermen families. It was observed that the summer mean catch per day (5.18 ± 0.69 kg) was more than the mean winter catch per day (2.85 ± 0.40 kg). However, the total annual catch per person was only 1195.56 ± 211.63 kg. Moreover, marketing through middlemen, especially, during summer, was observed to be very low fetching in terms of mean price per kilogram fish, amounting to Rs 37.50 ± 2.54 for local fish and Rs 22.50 ± 2.88 for the carp. It was also observed that the fisher folk had borrowed a good amount of money for the repair and construction of their houses and boats. Therefore, on the whole, the fishing business around Dal Lake was observed to be under severe stress. In this context, this paper has come out with recommendations to uplift the socio-economic conditions of the fishers.
Resumo:
A study was conducted in Tebuwana Wathurana Wetland ecosystem to understand its vegetation structure and faunal composition in order to assess its conservation needs. As there are no published records on the flora and fauna of Wathurana Wetlands in Tebuwana, it is necessary to understand the ecological and other relevant features in order to develop strategies to conserve this wetland. These objectives were pursued by surveying the vegetation of the wetland and by identifying fish and bird species present. A total of 66 species of flora and 61 species of fauna were identified in the survey. Of the 27 fish species recorded from the Tebuwana Wetland, 9 species were endemic and 17 species belonged to the indigenous category. With regard to the flora in the wetlands, the dominant families were Rubaceae, Fabaceae and Arecaceae. The 66 species belonged to 39 families and 61 genera while 12 species were endemic and 4 species were considered highly threatened. These flora were found in four layers. Of the 22 species of birds recorded, two species were endemic. This study revealed that these Wathurana Wetlands have a high species diversity but that they face many threats including encroachments, extraction of forest products mainly as timber, land filling, mining and occurrence of invasive species. It is essential to minimize the exploitation of natural resources from this wetland in the future and in particular to mark the boundary, conduct awareness programmes and continue research.