Studying and measuring the amount of detergents in sea-water samples in order to eliminate with adsorbents and inorganic nano-adsorbents for the sake of securing the water for marine nourishment pools

Increasing the amount of detergent industries in world in spite of having abundant benefits; entering a new kind of contamination into environment and attract the attention of environment liable of different countries to itself. Entering detergents into an aqueous solution cause pollution of water sources and environment in respect of appearing e problem and charges like: nutritive phenomenon, decomposition of hard group of detergent and producing foam. After using Detergents, they were poured into rivers, seas and lakes and have destructive effect on environment. A lot of hygiene problems were attributed to the water having detergents more than allowed value. So, it is specified the importance of eliminating detergents from contaminated water and it is application for secondary use. In order to attain to this aim, we can use inorganic nano and micro-caolin. In this study the adsorptive properties of detergent on the micro and nano caolin adsorbents were studied and the effect of various parameters like the amount of adsorptive materials, initial concentration of detergent, speed of stirring, electrolyte, temperature, time and pH were determined. The surface area of micro- and nano-caoline was reported 11.867 and 49.1438 m2 g-1, respectively. That increasing in nano-caoline surface area confirms increasing in capacity and more rate of adsorption. The results gained by this research recommend using micro- and nano-caolin as a plentiful, available and effective adsorbents. Also in comparison, using nano-caoline was recommended in order to have more effectiveness.

Investigate the effect of antibacterial ingredients used in marine paints in sea water

In this study, consider to the mechanism of controlled depletion paint, has been made the Antifouling (A/F) paints that use these in a paint system which applied on the steel. As a first step, it is necessary to prove that the system subject to investigation does fit into the mechanisms proposed for the CDPs system. According to this, the machine was designed and built as for ASTM D5108-90, D4939-89. Specimens immersed in natural sea water and were rotating by 60 r/min rotor. Painted specimens were tested for 59 days. The main objective of this study was to investigate if new antifouling paint are less toxic than traditional paint and more efficient. For this reason, Zineb and Ziram which is an ingredient in antifouling paints, was also studied. Zineb and Ziram are known as booster biocides in A/P composition. We used the Zineb and Ziram and synthesis of these in a A/F paints. The concentration of booster biocides are 3% and 6% in paints. We use scanning electron microscopy (SEM) for evaluation of paint film. The settlement and the growth of living organism on immersed surfaces was observed during 59 days. According to reports, the growth of organism was observed for A/F paint contains, 3% Zineb after 20days,3%Ziram after 24days and 3% Zineb +Ziram after 30days. By measuring leached rate of the Zn in A/F paints, we figured out the effectiveness of booster biocides on the growth of organism, for example in the absence of booster biocides, the critical released rate for preventing biofilm for A/F paint with ZnO is 15 μg/cm2day. This despite the fact that this figure for A/F paint contain Zineb is 4 μg/cm2, Ziram is 3 μg/cm2 and Zineb +Ziram is 2 μg/cm2.