Technologies for Measuring Currents in Coastal Environments, Portland, Maine, October 26-28, 2005:workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop entitled "Technologies for Measuring Currents in Coastal Environments" was held in Portland, Maine, October 26-28, 2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), an ACT partner organization. The primary goals of the event were to summarize recent trends in nearshore research and management applications for current meter technologies, identify how current meters can assist coastal managers to fulfill their regulatory and management objectives, and to recommend actions to overcome barriers to use of the technologies. The workshop was attended by 25 participants representing state and federal environmental management agencies, manufacturers of current meter technologies, and researchers from academic institutions and private industry. Common themes that were discussed during the workshop included 1) advantages and limitations of existing current measuring equipment, 2) reliability and ease of use with each instrument type, 3) data decoding and interpretation procedures, and 4) mechanisms to facilitate better training and guidance to a broad user group. Seven key recommendations, which were ranked in order of importance during the last day of the workshop are listed below. 1. Forums should be developed to facilitate the exchange of information among users and industry: a) On-line forums that not only provide information on specific instruments and technologies, but also provide an avenue for the exchange of user experiences with various instruments (i.e. problems encountered, cautions, tips, advantages, etc). (see References for manufacturer websites with links to application and technical forums at end of report) b) Regional training/meetings for operational managers to exchange ideas on methods for measuring currents and evaluating data. c) Organize mini-meetings or tutorial sessions within larger conference venues. 2. A committee of major stakeholders should be convened to develop common standards (similar to the Institute of Electrical and Electronics Engineers (IEEE) committee) that enable users to switch sensors without losing software or display capabilities. (pdf contains 28 pages)

FORTH for NOAA/MLML Instruments

This report describes FORTH software written for several instruments used in the NASA-sponsored project to design and build Marine Optical Buoy System (MOBS) and in the NOAA-sponsored project "EOS MODIS Execution: Oceanographic Profiling, Data Acquisition and Management for the Marine Optical Buoy System·'. In the NOAA project MLML and NOAA personnel will participate in quarterly cruises at the MOBS Hawaiian site to validate performance of SeaWiFS and will participate in several extended "process" cruises to provide wide geographic surface truthing investigations similar to those lead by Dennis Clark (NOAA) following the "launch of CZCS in 1979. In the NASA project we are designing and building MOBS, a high resolution spectroradiometer that will operate autonomously in a buoy moored west of Lanai in the Hawaiian Islands. That instrument, the "Marine Optical System" (MOS), will transmit by cellular phone in near real time observations of upwelled radiance and downwelled irradiance from three depths. [PDF contains 90 pages]

Wave Sensor Technologies, St Petersburg, Florida, March 7-9, 2007: workshop proceedings

The Alliance for Coastal Technologies (ACT) convened a workshop on "Wave Sensor Technologies" in St. Petersburg, Florida on March 7-9, 2007, hosted by the University of South Florida (USF) College of Marine Science, an ACT partner institution. The primary objectives of this workshop were to: 1) define the present state of wave measurement technologies, 2) identify the major impediments to their advancement, and 3) make strategic recommendations for future development and on the necessary steps to integrate wave measurement sensors into operational coastal ocean observing systems. The participants were from various sectors, including research scientists, technology developers and industry providers, and technology users, such as operational coastal managers and coastal decision makers. Waves consistently are ranked as a critical variable for numerous coastal issues, from maritime transportation to beach erosion to habitat restoration. For the purposes of this workshop, the participants focused on measuring "wind waves" (i.e., waves on the water surface, generated by the wind, restored by gravity and existing between approximately 3 and 30-second periods), although it was recognized that a wide range of both forced and free waves exist on and in the oceans. Also, whereas the workshop put emphasis on the nearshore coastal component of wave measurements, the participants also stressed the importance of open ocean surface waves measurement. Wave sensor technologies that are presently available for both environments include bottom-mounted pressure gauges, surface following buoys, wave staffs, acoustic Doppler current profilers, and shore-based remote sensing radar instruments. One of the recurring themes of workshop discussions was the dichotomous nature of wave data users. The two separate groups, open ocean wave data users and the nearshore/coastal wave data users, have different requirements. Generally, the user requirements increase both in spatial/temporal resolution and precision as one moves closer to shore. Most ocean going mariners are adequately satisfied with measurements of wave period and height and a wave general direction. However, most coastal and nearshore users require at least the first five Fourier parameters ("First 5"): wave energy and the first four directional Fourier coefficients. Furthermore, wave research scientists would like sensors capable of providing measurements beyond the first four Fourier coefficients. It was debated whether or not high precision wave observations in one location can take the place of a less precise measurement at a different location. This could be accomplished by advancing wave models and using wave models to extend data to nearby areas. However, the consensus was that models are no substitution for in situ wave data.[PDF contains 26 pages]

Dissolved oxygen probes: making oxygen measurements routine like temperature, St Petersburg, Florida, January 4-6, 2006: workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop "Making Oxygen Measurements Routine Like Temperature" was convened in St. Petersburg, Florida, January 4th - 6th, 2006. This event was sponsored by the University of South Florida (USF) College of Marine Science, an ACT partner institution and co-hosted by the Ocean Research Interactive Observatory Networks (ORION). Participants from researcldacademia, resource management, industry, and engineering sectors collaborated with the aim to foster ideas and information on how to make measuring dissolved oxygen a routine part of a coastal or open ocean observing system. Plans are in motion to develop large scale ocean observing systems as part of the US Integrated Ocean Observing System (100s; see http://ocean.us) and the NSF Ocean Observatory Initiative (001; see http://www.orionprogram.org/00I/default.hl). These systems will require biological and chemical sensors that can be deployed in large numbers, with high reliability, and for extended periods of time (years). It is also likely that the development cycle for new sensors is sufficiently long enough that completely new instruments, which operate on novel principles, cannot be developed before these complex observing systems will be deployed. The most likely path to development of robust, reliable, high endurance sensors in the near future is to move the current generation of sensors to a much greater degree of readiness. The ACT Oxygen Sensor Technology Evaluation demonstrated two important facts that are related to the need for sensors. There is a suite of commercially available sensors that can, in some circumstances, generate high quality data; however, the evaluation also showed that none of the sensors were able to generate high quality data in all circumstances for even one month time periods due to biofouling issues. Many groups are attempting to use oxygen sensors in large observing programs; however, there often seems to be limited communication between these groups and they often do not have access to sophisticated engineering resources. Instrument manufacturers also do not have sufficient resources to bring sensors, which are marketable, but of limited endurance or reliability, to a higher state of readiness. The goal of this ACT/ORION Oxygen Sensor Workshop was to bring together a group of experienced oceanographers who are now deploying oxygen sensors in extended arrays along with a core of experienced and interested academic and industrial engineers, and manufacturers. The intended direction for this workshop was for this group to exchange information accumulated through a variety of sensor deployments, examine failure mechanisms and explore a variety of potential solutions to these problems. One anticipated outcome was for there to be focused recommendations to funding agencies on development needs and potential solutions for 02 sensors. (pdf contains 19 pages)

Measuring Learning Outcomes in Library Instruction

The author uses clicker technology to incorporate polling and multiple choice question techniques into library instruction classes. Clickers can be used to give a keener understanding of how many students grasp the concepts presented in a specific class session. Typically, a student that aces a definition-type question will fail to answer an application-type question correctly. Immediate, electronic feedback helps to calibrate teaching approaches and gather data about learning outcomes. This presentation will analyze learning outcomes specific to scientific disciplines, and demonstrate the usefulness of clickers to engage and sustain student learning.

The design and development of the Windermere Profiler. An instrument for measuring how various environmental parameters vary with depth in lakes, reservoirs and rivers

A review article detailing the background, development and functionality of the Windermere Profiler, a multi parameter environmental monitoring instrument for use in lakes, reservoirs and rivers. The article explains the requirement for regular data collection by the Freshwater Biological Association at Windermere. The article covers the requirements of a profiling instrument, the design considerations, the electronic circuitry, the computer program, the operation of the computer software, the profiler in use and further developments to the design. A number of figures and images accompany the article.

Fisheries statutory instruments 1950-93 [collection of salmon and fisheries legislation with special respect to Cumbria]

This document is a collection of legislative documents relating to fisheries, especially Statutory Instruments, with special regards to the county Cumbria in the north of England. This includes Orders on salmon and trout spanning the years 1950-1993.

Measuring transaction costs of fisheries co-management in San Salvador Island, Philippines

It is generally accepted that co-management systems are more cost-effective than centralized management of natural resources. However, no attempts have been made to empirically verify the transaction costs involved in fisheries co-management. Some estimates of transaction costs of fisheries co-management in San Salvador Island, Philippines, are presented in this paper. These estimates are used to compare the various transaction costs in co-managed and in centrally managed fisheries in San Salvador Island.

Measuring ICLARM's impact on research and researchers

For a research organization such as ICLARM which carries out long-term basic research, justifying money spent can be a difficult exercise. This articles examines different ways by which impact of ICLARM research can be measured.

Comparison of Standard Length, Fork Length, and Total Length for Measuring West Coast Marine Fishes

Measurements of adult marine fishes on the U.S. west coast are usually made using one of three methods: standard length, fork length, or total length. Each method has advantages and disadvantages. In this paper we attempt to determine whether one method is faster and/or more reliable than the other methods. We found that all three methods were comparable. There was no appreciable difference in the time it took to measure fish using the different methods. Fork length had the most reproducible results; however, it had the highest level of bias between researchers. We therefore suggest that selection of measurement type be based on what other researchers have used for the species under study. The best improvement in measurement reliability probably occurs by adequate training of personnel and not type of measurement used.

Measuring Fishing Capacity and Utilization with Commonly Available Data: An Application to Alaska Fisheries

Due to a lack of data on vessel costs, earnings, and input use, many of the capacity assessment models developed in the economics literature cannot be applied in U.S. fisheries. This incongruity between available data and model requirements underscores the need for developing applicable methodologies. This paper presents a means of assessing fishing capacity and utilization (for both vessels and fish stocks) with commonly available data, while avoiding some of the shortcomings associated with competing “frontier” approaches (such as data envelopment analys

International legal instruments relevant to fisheries and fishing communities : a handbook. Introduction

This handbook provides detailed information for a wide range of legal instruments relevant to fisheries and fishworkers. It covers 114 legal instruments, categorized into the following seven themes: Theme I. Human Rights, Food Security, Women and Development. Theme II. Environment and Sustainable Development. Theme III. Oceans and Fisheries Management. Theme IV. Environmental Pollution Theme V. Fishing Vessels and Safety at Sea Theme VI. Labour Theme VII. Trade The handbook also includes the working of the instruments (decision-making bodies, monitoring and implementation agencies, periodicity of meetings, rules for participation in meetings of the decision-making bodies and implementation agencies for States and non-governmental organizations), regional instrument and agencies. Apart from being a ready reckoner to the instruments, it highlights the important sections of relevance to fisheries or small-scale fisheries and fishworkers. The companion CD-ROM provides the full texts of the instruments in a searchable database. The handbook will be useful for fishworker and non-governmental organizations, and also for researchers and others interested in fisheries issues.

International legal instruments relevant to fisheries and fishing communities : a handbook. Theme I. Human rights, food security, women and development

This handbook provides detailed information for a wide range of legal instruments relevant to fisheries and fishworkers. It covers 114 legal instruments, categorized into the following seven themes: Theme I. Human Rights, Food Security, Women and Development. Theme II. Environment and Sustainable Development. Theme III. Oceans and Fisheries Management. Theme IV. Environmental Pollution Theme V. Fishing Vessels and Safety at Sea Theme VI. Labour Theme VII. Trade The handbook also includes the working of the instruments (decision-making bodies, monitoring and implementation agencies, periodicity of meetings, rules for participation in meetings of the decision-making bodies and implementation agencies for States and non-governmental organizations), regional instrument and agencies. Apart from being a ready reckoner to the instruments, it highlights the important sections of relevance to fisheries or small-scale fisheries and fishworkers. The companion CD-ROM provides the full texts of the instruments in a searchable database. The handbook will be useful for fishworker and non-governmental organizations, and also for researchers and others interested in fisheries issues.

International legal instruments relevant to fisheries and fishing communities : a handbook. Theme II. Environment and sustainable development

This handbook provides detailed information for a wide range of legal instruments relevant to fisheries and fishworkers. It covers 114 legal instruments, categorized into the following seven themes: Theme I. Human Rights, Food Security, Women and Development. Theme II. Environment and Sustainable Development. Theme III. Oceans and Fisheries Management. Theme IV. Environmental Pollution Theme V. Fishing Vessels and Safety at Sea Theme VI. Labour Theme VII. Trade The handbook also includes the working of the instruments (decision-making bodies, monitoring and implementation agencies, periodicity of meetings, rules for participation in meetings of the decision-making bodies and implementation agencies for States and non-governmental organizations), regional instrument and agencies. Apart from being a ready reckoner to the instruments, it highlights the important sections of relevance to fisheries or small-scale fisheries and fishworkers. The companion CD-ROM provides the full texts of the instruments in a searchable database. The handbook will be useful for fishworker and non-governmental organizations, and also for researchers and others interested in fisheries issues.