On Selecting the excess temperature to minimize the entrainment mortality rate

In selecting an excess temperature at which to operate a power plant cooling system it has been customary to consider only thermal stresses and to use the ratio of the number of organisms killed to the number of organisms entrained. This frequently leads to the selection of a low excess temperature, AT, which, in turn, requires a large volume flow of cooling water. When mortalities due to physical and chemical stresses are included and the total number of entrained organisms killed is taken as the measure of the environmental damage, it becomes evident that the choice of a low excess temperature is seldom, if ever, best.

Statistics of the Eastern Pacific Ocean tuna fishery, 1979 to 1992

ENGLISH: This report, published in response to the large volume of requests for information received by the IATTC, provides information on the catches, effort, and composition of the purse-seine and baitboat fleets which fished for tunas and tuna-like species in the eastern Pacific Ocean (EPO) in the 1979-1992 period. It does not include data for longline fisheries operating in the EPO; that information may be found in the IATTC's Annual and other reports. The IATIC has published similar data for other periods in its Bulletin series (Shimada, 1958; Alverson, 1959, 1960, ~963; Martin, 1962; Calkins and Chatwin, 1967, 1971; Calkins, 1975; Orange and Calkins, 1981) and in its weekly, quarterly, and annual reports. SPANISH: El presente informe, publicado como resultado del gran volumen de solicitudes de información recibidas por la CIAT, presenta información sobre las capturas, el esfuerzo, y la composición de las flotas que pescaron atunes y especies afines con red de cerco o carnada en el Océano Pacífico oriental (OPa) en el período de 1979-1992. La CIATha publicado datos similares para otros períodos en su serie de Boletines (Shímada, 1958; Alverson, 1959, 1960, 1963; Martin, 1962; Calkins y Chatwin, 1967, 1971; Calkins, 1975; Orange y Calkins, 1981) y en sus informes semales, trimestrales, y anuales. (PDF contains 102 pages.)

Geographic and economic setting of Lake Victoria

Lake Victoria, besides being the second largest in the world after Lake Superior, is the largest tropical lake. Its waters are shared by Kenya (6% of the surface area), Uganda (43%), and Tanzania (51%). Before dramatic structural and functional changes manifested in the lake's ecosystem especially in the 1980s, fish life flourished in the lake's entire water column at all times of the year. Currently, the situation is much more different from what it was in the past. The exponential increase in the introduced Nile perch (Lates niloticus) and Nile tilapia (Oreochromis niloticus) stocks, siltation, wetland degradation and eutrophication have characterised the lake ecosystem. The two exotic species and the small native cyprinid (Rastrineobola argentea) form the basis of the commercial fishery that was once dominated by two native tilapiines (Oreochromis esculentus and Oreochromis variabilis) and five other large-bodied endemic fishes. Severe deoxygenation observed at shallow depths (Ochumba 1990; Hecky et al., 1994) indicates that a large volume of the lake is unable to sustain fish life. The Lake Victoria catchment is one of the most densely populated areas in East Africa, encompassing a population of about 30 million people. Widespread poverty resulting from high inflation rates, lack of opportunities and general unemployment have characterised the lakeside communities over much of the last two decades. The biophysical environment in which Lake Victoria exists makes the lake particularly susceptible to changes that occur as a result of human modification to the watershed or the lake itself, thus rendering benefits from the lake unsustainable.

Adsorption of aromatic compound by multi-walled carbon nanotube from sea water

It is global concern that soil and water were contaminated with organic substances such as BTEX (benzene) (B), toluene (T) and xylene (x) .The presence of excessive amounts of BTEX in aqueous surroundings may have a greatly adverse impact on water quality and thus endanger public health and welfare. Carbon nanotubes (CNT) have aroused widespread attention as a new type of adsorptions due to their outstanding ability for the removal of various inorganic and organic pollutants from large volume of wastewater. Due to variety of adsorbent and their ability to adsorb pollutant, it is possible to reduce expenses and completely omit pollutant. In this CNT is used as a new adsorbent for removal pollutant such as benzene, toluene, and xylene. The result in the area of adsorbing benzene, toluene, and xylene is as follows: the changes of pH don’t affect the capacity of adsorption and the greatest amount of adsorption occurs in pH. The greatest amount of adsorption occurs when using 0.01gr CNT oxidized. Comparing CNT with CNT oxidized in term of adsorption capacity, it is proved that the adsorption capacity of CNT oxidized is much more than CNT. The result of comparing the percentage of adsorption of mentioned elements (B, X, T) is as follows; the amount of adsorption of xylene is more than toluene and toluene is more than benzene. It should be mentioned that in this research the percentage of adsorption to measure is between to 70-80.

Science-based restoration monitoring of coastal habitats, Volume One: A framework for monitoring plans under the Estuaries and Clean Waters Act of 2000 (Public Law 160-457)

Executive Summary: The Estuary Restoration Act of 2000 (ERA), Title I of the Estuaries and Clean Waters Act of 2000, was created to promote the restoration of habitats along the coast of the United States (including the US protectorates and the Great Lakes). The NOAA National Centers for Coastal Ocean Science was charged with the development of a guidance manual for monitoring plans under this Act. This guidance manual, titled Science-Based Restoration Monitoring of Coastal Habitats, is written in two volumes. It provides technical assistance, outlines necessary steps, and provides useful tools for the development and implementation of sound scientific monitoring of coastal restoration efforts. In addition, this manual offers a means to detect early warnings that the restoration is on track or not, to gauge how well a restoration site is functioning, to coordinate projects and efforts for consistent and successful restoration, and to evaluate the ecological health of specific coastal habitats both before and after project completion (Galatowitsch et al. 1998). The following habitats have been selected for discussion in this manual: water column, rock bottom, coral reefs, oyster reefs, soft bottom, kelp and other macroalgae, rocky shoreline, soft shoreline, submerged aquatic vegetation, marshes, mangrove swamps, deepwater swamps, and riverine forests. The classification of habitats used in this document is generally based on that of Cowardin et al. (1979) in their Classification of Wetlands and Deepwater Habitats of the United States, as called for in the ERA Estuary Habitat Restoration Strategy. This manual is not intended to be a restoration monitoring “cookbook” that provides templates of monitoring plans for specific habitats. The interdependence of a large number of site-specific factors causes habitat types to vary in physical and biological structure within and between regions and geographic locations (Kusler and Kentula 1990). Monitoring approaches used should be tailored to these differences. However, even with the diversity of habitats that may need to be restored and the extreme geographic range across which these habitats occur, there are consistent principles and approaches that form a common basis for effective monitoring. Volume One, titled A Framework for Monitoring Plans under the Estuaries and Clean Waters Act of 2000, begins with definitions and background information. Topics such as restoration, restoration monitoring, estuaries, and the role of socioeconomics in restoration are discussed. In addition, the habitats selected for discussion in this manual are briefly described. (PDF contains 116 pages)

The History, Present Condition, and Future of the Molluscan Fisheries of North and Central America and Europe: Volume 2, Pacific Coast and Supplemental Topics

Over 100 molluscan species are landed in Mexico. About 30% are harvested on the Pacific coast and 70% on the Atlantic coast. Clams, scallops, and squid predominate on the Pacific coast (abalone, limpets, and mussels are landed there exclusively). Conchs and oysters predominate on the Atlantic coast. In 1988, some 95,000 metric tons (t) of mollusks were landed, with a value of $33 million. Mollusks were used extensively in prehispanic Mexico as food, tools, and jewelry. Their use as food and jewelry continues. Except in the States of Baja California and Baja California Sur, where abalone, clams, and scallops provide fishermen with year-round employment, mollusk fishing is done part time. On both the Pacific and Atlantic coasts, many fishermen are nomads, harvesting mollusks wherever they find abundant stocks. Upon finding such beds, they build camps, begin harvesting, and continue until the mollusks become so scarce that it no longer pays to continue. They then look for productive beds in other areas and rebuild their camps. Fishermen harvest abalones, mussels, scallops, and clams by free-diving and using scuba and hooka. Landings of clams and cockles have been growing, and 22,000 t were landed in 1988. Fishermen harvest intertidal clams by hand at wading depths, finding them with their feet. In waters up to 5 m, they harvest them by free-diving. In deeper water, they use scuba and hooka. Many species of gastropods have commercial importance on both coasts. All species with a large detachable muscle are sold as scallops. On the Pacific coast, hatchery culture of oysters prevails. Oyster culture in Atlantic coast lagoons began in the 1950's, when beds were enhanced by spreading shells as cultch for spat. (PDF file contains 228 pages.)