Economic analysis of utilizing Kainji gas kiln for fish smoking in the Kainji Lake Basin of Nigeria

Marketing of smoked fish in the Kainji Lake Basin (Nigeria) has been found to be complex, traditional and inefficient. It is also said to be limited in scope due to poor handling and processing techniques, lack of storage facilities and inadequate marketing informations. The invention of Kainji gas kiln has been found suitable to overcoming poor handling and processing techniques. This paper discusses the feasibility of operating Kainji gas kiln commercially supported with adequate storage facilities and competent management hands. The financial indicators of net present value (NPV), 47,481.11, Internal rate of return (IRR) 24% and payback period of 2.3 years that are calculated confirmed that the commercial use of Kainji gas kiln is indeed profitably feasible

Construction, extension and evaluation of the improved smoking kiln (Banda) in Kainji Lake area

Fish smoking, as a traditional occupation of fishermen and women in Kainji Lake Area (Nigeria) is done using simple traditional ovens called 'Banda', the fuel for the smoking being almost hundred percent dependent on wood. A simple modification was made to the traditional 'Banda' oven using a damper to prevent burning of the fish. A comparison of the improved and the traditional 'Banda' was made. The results indicate that fuel wood consumption was reduced 52 percent by using the improved 'Banda', which implied that 50 percent of fish processor's income could be saved through the adoption of this technology. The most important advantage of the improved kiln, fuel wood conservation, represents for fishers a problem of an economic importance. Whilst they are aware that it is becoming much more difficult to get the needed fuel wood, the children can still conveniently collect enough wood for both home use and processing activities. The cost of the components of the improved kiln, when compared with the traditional version may be considered quite significant, and hence the reluctance of the fish processors in constructing similar ones. Selected blacksmiths were trained to continue the fabrication of the kiln component. The training was carried out to assure that the improved kiln will be constructed even after the project will end to support the fabrication

Making kippers from local herring (Sardinella spp.) smoke-cured in the Torry Kiln

(Sardinella) are available all year round in Sierra Leone. The best time to use them for baiting herrings is during the dry season when they are fattest and feeding well. The most common method of processing herring locally is hot smoking to give either soft, moist and cooked product or a dry, brittle product with very low moisture content. The author describes a curing method intended to add variety to the types of products that can be obtained from local herring. It is only mildly preservative, the product cannot be kept more than 24 hours without refrigeration. Particular attention is paid to the source and quality of the raw material used, and the processing method is detailed with attention to washing, splitting, brining, smoking, and the application of the Torry fish smoking kiln to the process.

The Gjerstad kiln: a combined hot and cold smoking kiln

A combined hot and cold smoking kiln has been constructed for use at Lake Turkana, Kenya. Used for cold smoking, the kiln's main advantages over the traditional kilns used in this area are its greater smoking capacity and lower firewood consumption. Having the option of using the same smoke house for cold and hot smoking reduces the total construction costs for an operator producing both types of smoke cured product. The hot smoking process was found to require markedly less firewood than cold smoking, a fact of considerable importance in desert or semi-desert areas with sparse vegetation.

How to construct a fish smoking kiln

As interest increases in fish production, fish farming is on the rise as more fish is produced in ponds, cages and tanks. However not all fish can be sold out and consumed at the same time, in addition to this, different consumers show different preference. Some individua Is tend to prefer smoked fish to fresh and fried fish. Apart from satisfying the different consumer preferences, fish smoking is important because it in creases the self life of fish, there by reducing post harvest losses. It also adds value to the fish and in this way the farmer can fetch more money from farmed products. Although the technology has been around for several years amongst the fishing communities, it is not well known amongst fish farmers. There is need to bring fish fanners on board to know how to construct the smoking kiln through the stapes out lined below.

Improved cement block fish smoking kiln

The kiln described below is based on a portable sheet steel kiln designed by Beny in 1964. Improvement of quality of the final product, increased operating efficiency and reduction in firewood consumption were the reasons prompting the design. The design discussed was evolved by the author after a number of experimental prototypes were built, in order to reduce first cost and heat losses, both high with the all-steel kiln. Traditionally, a simple pit and table is used, around the shures of Lake Kyoga, for smoking fish.

Sustainability of indigenous technology in postharvest fisheries operations in Edo and Delta states, Nigeria

The study examined the sustainability of various indigenous technologies in post-harvest fishery operation in Edo and Delta States (Nigeria). A total of seventy processors were interviewed during the survey through a random selection. The data obtained were analysed by descriptive statistics. The results obtained revealed that the majority of the fish processors within the study areas were married with women who were not educated beyond the first Leaving School Certificate. Most of the fish processed were bought fresh, while the commonest method of preservation/processing practiced was smoking. The type of processing equipment used was the Chorkor smoking kiln and the drum smoker while the commonest source of energy is firewood. The processing activities within the communities were found to be profitable. However it was observed that due to the high cost of processing materials and equipment, the economic growth and the living standard is quite low. Some recommendations were made to improve the traditional method of fish preservation and processing

Assessment of post-harvest losses in Nigeria fishery: the Kainji Lake model

The paper provides a description of a methodology used for quantitative assessment of post harvest losses in the Kainji Lake Fishery (Nigeria). The sample population was made up of 314 fisherfolk, 115 processors, 125 fish buyers and 111 fish sellers. For the determination of handling losses, 24,839 fishes weighing 2,389.31 kg belonging to 43 species were examined of which 10% by number and 9% by weight deteriorated at checking and 4% by number and 3% by weight at landing. Processing losses recorded 22% by number and 16% by weight deteriorated prior to and during smoking with the traditional 'Banda' kiln. During marketing, 16% of fish sold had deteriorated and 6% by weight of fish bought also deteriorated, mainly due to insect infestation during storage. Based on the 1995 yield estimate for Kainji Lake fishery, approximately 1000 tons of fish estimated at 80 million Naira were lost during handling alone. This figure would be much higher if the level of losses during processing and marketing are included. This assessment technique is recommended for use in obtaining quantifiable data on post harvest losses from other water bodies in Nigeria

Effect of locally available spices on the organoleptic and storage periods of Heterotis niloticus

Investigation were carried out on the effect of some locally available species in the enhancement of the organoleptic quality and the storage periods of smoked Heterotis niloticus using Pprosopis africana as common smoke sources. Samples of fresh H. niloticus were bought, cut into chunks while extract juice from pepper, ginger rhizomes, garlic, onion bulb were used as sources of spices. Samples of fish were divided randomly into five (5) batches dipped into spice extract juices for 10 minutes drained and smoked with common firewood. Treatment without spice extract juice served as control. Each batch of fish was smoked for 7 hours on a drum-made smoking kiln products were individually packaged in polythene bag stored at room temperature and used for sensory evaluation and microbial analysis. Results of the sensory evaluation indicated that there was significant difference (P<0.005) for taste, appearance, colour and overall acceptance for the treatments. Ginger juice extract had the best overall acceptance. Similarly there was significant difference (P>0.05) in the microbial analysis. The garlic juice extract had the longest storage period with minimum total plate and mould count after 8 weeks

Investment opportunity in improved fish smoker (IFS) as food security for artisanal women fish processors (AWOFPS) in Nigeria: a case study of Kainji Lake area

The Improved Fish Smoker (IFS) was designed and constructed by NIFFR in collaboration with GTZ in 1997. After the on-station trials, five fishing villages with pronounced fishing activities were selected for the demonstration. The IFS and the traditional Smoking Kiln were compared in one of the fishing villages using Gross Margin analysis (GM) and productivity index to determine the profitability and productivity of the two kilns. It was found that the average income of IFS users at fully capacity was N5, 555.50 per day in a year N1.3 million would be realized. Conversely, the average income of the users of Traditional Smoking Kiln (TSK) was N649.00 per day and about N152, 150.50 would be realized in a year. From this estimate, it is evident that the IFS are more profitable than the TSK. Productivity index of the two kilns also revealed that the productivity of IFS is higher than the TSK. Thus, using the IFS would enhance the income of artisanal women Fish Processors (AWOFPS) and ensure food security for the household

Comparative evaluation of the proximate composition of smoked and salted-dried Oreochromis niloticus

This study was carried out to evaluate and compare the shelf life of smoked and salted-dried Oreochromis niloticus over a relative time period. Improved traditional smoking kiln and salting were employed respectively. The smoking kiln was constructed with iron metal with a dimension of 120cm x 70cm and consisting of three smoking racks with dimension of 30 x 30cm each. Table salt was used for preservation of some of the specimens. A total of 30 samples weighing 7.1kg were used. Fifteen (15) samples each were used respectively for smoking and salting. Satisfactory smoking was achieved in two days while salting to dryness was accomplished in four days. The initial percentage proximate compositions of the smoked products were 7.94%, 66. 97%, 8.`84% and 2.96% for moisture, protein, lipid and ash respectively, while that of the salted products were 8.37%, 63.93%, 12.91% and 3.95% for moisture, protein, lipid and ash. Preliminary results of the proximate compositions of the two products at the end of the fifth week of storage were as follows; 8.23%, 65.70%, 10.63% and 2.23% for moisture, protein, lipid and ash respectively of the smoked products, while 6.33%, 64.25%, 11.28% and 2.38% represent the values of moisture, protein, lipid and ash of the salted-dried products. By the individual product proximate characterization, it was discovered that both products were still relatively in good and acceptable condition. However, the protein and moisture values of the smoked products were relatively greater than those of the salted-dried products, while on the other hand, lipid and ash were relatively greater in salted-dried products. The prevailed relative higher moisture in the smoked products constitutes a predisposing condition for microbial activity and spoilage of the products, while the relative higher percentage lipid in the salted-dried products predisposes the products to lipid oxidation and rancidity.

Aquaculture technology transfer to smallholder farmers in Malawi, Southern Africa

Details are given of activities conducted in Zomba, Malawi, in order to demonstrate new aquaculture technologies and encourage their use by smallholder fish farmers. The following technologies were introduced: napier grass as a pond output; use of a reed fence for harvesting fish; developing a high-quality compost as a pond input; vegetable-pond integration; chicken-pond integration; smoking kiln; pond stirring; and rice-fish integration. The reactions of the farmers to these technologies and their testing by the farmers are outlined briefly.