STREAM Journal, Vol. 5, No. 2, pp 1-17. April-June 2006

CONTENTS: First one-stop aqua shop in Pakistan, by Syed Nadeem Sharib and Muhammad Junaid Wattoo. Dad Karim: a fisherman of Gwadar, by Abdul Rahim. Learning to fish in the deep sea of Sindh Province, by Muhammad Alam. Freshwater prawn fishery of Pakistan, by Muhammad Yaqoob. Cephalopod fishery: a local technique to catch cuttlefish in the coastal waters of Pakistan, by Shabir Ali Amir. Grouper culture in Pakistan, by S. Makhdoom Hussain and Zakia Khatoon.

Liver genomic responses to ciguatoxin: evidence for activation of Phase I and Phase II detoxification pathways following an acute hypothermic response in mice

Ciguatoxins (CTX) are polyether neurotoxins that target voltage-gated sodium channels and are responsible for ciguatera, the most common fish-borne food poisoning in humans. This study characterizes the global transcriptional response of mouse liver to a symptomatic dose (0.26 ng/g) of the highly potent Pacific ciguatoxin-1 (P-CTX-1). At 1 h post-exposure 2.4% of features on a 44K whole genome array were differentially expressed (p ≤ 0.0001), increasing to 5.2% at 4 h and decreasing to 1.4% by 24 h post-CTX exposure. Data were filtered (|fold change| ≥ 1.5 and p ≤ 0.0001 in at least one time point) and a trend set of 1550 genes were used for further analysis. Early gene expression was likely influenced prominently by an acute 4°C decline in core body temperature by 1 h, which resolved by 8 h following exposure. An initial downregulation of 32 different solute carriers, many involved in sodium transport, was observed. Differential gene expression in pathways involving eicosanoid biosynthesis and cholesterol homeostasis was also noted. Cytochrome P450s (Cyps) were of particular interest due to their role in xenobiotic metabolism. Twenty-seven genes, mostly members of Cyp2 and Cyp4 families, showed significant changes in expression. Many Cyps underwent an initial downregulation at 1 h but were quickly and strongly upregulated at 4 and 24 h post-exposure. In addition to Cyps, increases in several glutathione S-transferases were observed, an indication that both phase I and phase II metabolic reactions are involved in the hepatic response to CTX in mice.

Aquaculture and food security, poverty alleviation and nutrition in Ghana: Case study prepared for the Aquaculture for Food Security, Poverty Alleviation and Nutrition project

This study provides an overview of the aquaculture sector in Ghana. It assesses the actual and potential contribution of aquaculture to poverty reduction and food security, and identifies enabling conditions for and drivers of the development of Ghana’s aquaculture sector. The study uses data collected from a variety of primary and secondary sources, including key informant interviews with actors within the aquaculture sector and relevant secondary literature.

Salt-tolerance in mangrove soil bacteria

A total of sixteen bacterial species were isolated from mangrove soils of Karachi, Pakistan. Twelve of the isolates were gram positive while four were gram negative. All sixteen species showed resistance to high concentration of streptomycin, however, resistance to chloramphenicol and tetracycline was variable. The isolates tolerated up to 110‰ salinity and accumulated sodium form the media.

Percentage composition of Brachyuran larvae collected during 1994 in Manora Channel, Karachi, Pakistan

Brachyuran larvae are the most common zooplankton component of the Manora Channel, Karachi, Pakistan. The identification of these larvae would assist in the assessment of brachyuran species and provide information on percentage composition, occurrence, abundance and breeding habits of the brachyuran species in the Manora Channel area. However plankton caught larvae is not easily identified. An accurate identification of such material is only possible by the comparison with larvae reared under laboratory conditions and documented with illustrations. The identifications for this present study were based on the works of Gurney (1938); Atkins (1954); Chhapgar (1955); Raja Bai (1960); Hashmi (1969, 1970a, b); Baba and Miyata (1971); Kakati and Sankolli (1975); Rice (1975); Kakati (1977); Lim and Tan (1981); Yatsuzuka and Sakai (1984); Fielder, et al (1984); Amir (1989, M. Phil thesis unpublished); Ingle (1992); Siddiqui and Tirmizi (1992); Tirmizi et al (1993); Bano (1999, M. Phil thesis unpublished); Ghory and Siddiqui (2001); Ghory (2002, M. Phil thesis unpublished); Ghory and Siddiqui (2002).

The study of the ergosan and vibromax effects on growth performances, survival rate and increase of the resistance to some of the environmental stresses in post larvae stage of the Indian white shrimp

In this study, which has been done in Hormoz larve Hatchery at Kohestak in Minab at 1385, the efficiency of Ergosen and Vibromax vaccine and the effect of them on growth factors such as total length, Carapase, dry weight and the number of upper mordents of rostrum and survival of the stages of larvae and post larvae of Indian white shrimp was studied. Thus in order to comparison the effects of Vibromax and Ergosen, each of them separately, in one treatment, and in another simultaneously with one control treatment was used. Vaccination against larvae shrimps was done through Artemia. This study used four treatments with three replicates in a completely randomized design and comparison of means was done through Duncan test. Breeding larvae and post larvae of Indian white shrimp from zoa I stage to PL 15 was done in 20 litter plastic buckets. Present results indicated that the highest amount of growth and survival factors in larvae stage (from zoa to PL1), and also in stages of PL5 and PL15, in the treatment of Ergoson effect + vaccine and it was with a little difference from that treatment of Ergoson effect which was in high significance difference in regard to control treatment at α<0.01 level and treatment of vaccine effect and control treatment at α<0.01 level often have no significant difference. This research used environmental stress tests to study the quality of post larvae under experiment. Studying in this field showed that feeding vaccine to larvae of Indian shrimps which was done through Artemia nauplii enrichment ,and ergosen , in treatment of ergosen vaccine lead to more resistance of post larvaes against salinity stress tests and formalin .This case was observed in every three stages ,so that in stress formalin test 100 parts per million and also 10 and 20 salinity parts in thousands the most survival was observed in treatment of Ergosan effect+vaccine and after that in treatment of Ergoson effect and with a little difference in treatment of vaccine effect. Of course this case, in treatment of Ergoson effect + vaccine due to the synergistic properties vaccine with Ergoson was more than to other treatments, while every three treatments, in most stages had significant difference toward control treatment at α<0.01 level and the control treatment because of not having Ergoson and nauplii artemia with vaccine, having the least survival rate in this stages.

Preparation of Ni-P electroless and its corrosion resistance against sea water

Electroless coating is much appropriate process at engineering surface. Since the discovery of electroless nickel-phosphorus coating in 3996, due to technical and economic advantages as well as desirable characteristics such as resistance to corrosion, abrasion and a high hardness has found wide application at engineering industries. Properties of electroless nickel-phosphorus coating depend on the characteristics of the used bath and heat treatment. In this study, optimal conditions and concentration of sodium citrate, sodium acetate and lactic acid in the bath of electroless nickel-phosphorus coating to the steel ck67 surface was determined. Structure, chemical composition and phases occurring in the coating were investigated using Scanning Electron Microscope (SEM) and X-ray diffraction analysis (XRD). The corrosion behavior of coatings in solution 3.5٪ NaCl was studied using electrochemical. The results showed that corrosion resistance of the coating with composition sodium citrate, sodium acetate and lactic acid decreased respectively.

Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.