Design and construction of portable surface aeration pump for tanks and small ponds

The maintenance of adequate dissolved oxygen level is very important in the economy of any aquaculture system. An easy to construct aerating device was created using 0.5 hp water-pump, shower rose, Styrofoam, and rubber hose. The aerator works by drawing water from below and discharging it into the atmosphere as a spray. The spray is aerated as it splashes into the water surface. The aerating device has an average spray of 1.2 unit and doubles the dissolved oxygen content of 37.8 m super(3) tank in one hour

Who's working on fishing gear design and construction for small-scale fisheries?

The findings are presented of a search conducted on traditional fishing gear design and construction using the ASFA database (1971-90) and the ICLARM Library and professional staff collections.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Development of design and construction of fishing boats in Uganda

Fishing boats and canoes varied very little in Uganda from the middle of the 19th century umil 1949. types in use being the Dug Out Canoe. up to 40 ft. in length with 4 ft. beam hollowed from trees, and "Sesse" canoes which were used on Lake Victoria; these had an obvious Arab influence. The length of the "Sesse" in recent years as from about 1912 is 28 ft., and it is used as an open fishing craft.

Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.

Pond construction: design and layout of ponds

(4pp.)

Fish pass design - criteria for the design and approval of fish passes and other structures to facilitate the passage of migratory fish in rivers

Many of British rivers hold stocks of salmon (Salmo salar L.) and sea trout (Salmo trutta L.) and during most of the year some of the adult fish migrate upstream to the head waters where, with the advent of winter, they will eventually spawn. For a variety of reasons, including the generation of power for milling, improving navigation and measuring water flow, man has put obstacles in the way of migratory fish which have added to those already provided by nature in the shape of rapids and waterfalls. While both salmon and sea trout, particularly the former, are capable of spectacular leaps the movement of fish over man-made and natural obstacles can be helped, or even made possible, by the judicious use of fish passes. These are designed to give the fish an easier route over or round an obstacle by allowing it to overcome the water head difference in a series of stages ('pool and traverse' fish pass) or by reducing the water velocity in a sloping channel (Denil fish pass). Salmon and sea trout make their spawning runs at different flow conditions, salmon preferring much higher water flows than sea trout. Hence the design of fish passes requires an understanding of the swimming ability of fish (speed and endurance) and the effect of water temperature on this ability. Also the unique features of each site must be appreciated to enable the pass to be positioned so that its entrance is readily located. As well as salmon and sea trout, rivers often have stocks of coarse fish and eels. Coarse fish migrations are generally local in character and although some obstructions such as weirs may allow downstream passages only, they do not cause a significant problem. Eels, like salmon and sea trout, travel both up and down river during the course of their life histories. However, the climbing power of elvers is legendary and it is not normally necessary to offer them help, while adult silver eels migrate at times of high water flow when downstream movement is comparatively easy: for these reasons neither coarse fish nor eels are considered further. The provision of fish passes is, in many instances, mandatory under the Salmon and Freshwater Fisheries Act 1975. This report is intended for those involved in the planning, siting, construction and operation of fish passes and is written to clarify the hydraulic problems for the biologist and the biological problems for the engineer. It is also intended to explain the criteria by which the design of an individual pass is assessed for Ministerial Approval.

Design and implementation of fishery modules in integrated household surveys in developing countries

Fish and other aquatic animals contribute to the food security of citizens of developing countries, both as a source of income and as a component of healthy diets, yet fishing is not currently captured in most integrated household surveys. This sourcebook provides essential technical guidance on the design of statistical modules and questionnaires aimed at collecting fishery data at the household level. Background on the main policies important to the fishery sector, information on the data needed to analyze issues of policy relevance, and methodology on the construction of survey questions to collect necessary data are also provided. The document is organized to provide essential technical guidance on how to design statistical modules and questionnaires aimed at collecting fishery data at the household level. It includes an overview of the main technical and statistical challenges related to sampling fishery-dependent households. The document starts with an introductory section identifying the potential reasons why fisheries and in particular small-scale fisheries have not been adequately included in national statistical systems in a large number of countries. The report then proposes a succinct review of what is known (and what remains unknown) about small-scale fisheries and their contribution to the livelihoods of households in sub-Saharan Africa. It also provides readers with background on the main policies that are important to the fishery sector, information on the data needed to analyze issues of policy relevance, and methodology on the construction of survey questions to collect necessary data.

Chief Kerry's moose : a guidebook to land use and occupancy mapping, research design, and data collection

Aboriginal peoples in Canada have been mapping aspects of their cultures for more than a generation. Indians, Inuit, Métis, non-status Indians and others have called their maps by different names at various times and places: land use and occupancy; land occupancy and use; traditional use; traditional land use and occupancy; current use; cultural sensitive areas; and so on. I use “land use and occupancy mapping” in a generic sense to include all the above. The term refers to the collection of interview data about traditional use of resources and occupancy of lands by First Nation persons, and the presentation of those data in map form. Think of it as the geography of oral tradition, or as the mapping of cultural and resource geography. (PDF contains 81 pages.)

The design and development of the Windermere Profiler. An instrument for measuring how various environmental parameters vary with depth in lakes, reservoirs and rivers

A review article detailing the background, development and functionality of the Windermere Profiler, a multi parameter environmental monitoring instrument for use in lakes, reservoirs and rivers. The article explains the requirement for regular data collection by the Freshwater Biological Association at Windermere. The article covers the requirements of a profiling instrument, the design considerations, the electronic circuitry, the computer program, the operation of the computer software, the profiler in use and further developments to the design. A number of figures and images accompany the article.

Workshop on turtle bycatch mitigation for longline fisheries: experimental design and data analysis, 7-8 November 2007, San Ramón de Alajuela, Costa Rica

Large numbers of fishing vessels operating from ports in Latin America participate in surface longline fisheries in the eastern Pacific Ocean (EPO), and several species of sea turtles inhabit the grounds where these fleets operate. The endangered status of several sea turtle species, and the success of circle hooks (‘treatment’ hooks) in reducing turtle hookings in other ocean areas, as compared to J-hooks and Japanese-style tuna hooks (‘control’ hooks), prompted the initiation of a hook exchange program on the west coast of Latin America, the Eastern Pacific Regional Sea Turtle Program (EPRSTP)1. One of the goals of the EPRSTP is to determine if circle hooks would be effective at reducing turtle bycatch in artisanal fisheries of the EPO without significantly reducing the catch of marketable fish species. Participating fishers were provided with circle hooks at no cost and asked to replace the J/Japanese-style tuna hooks on their longlines with circle hooks in an alternating manner. Data collected by the EPRSTP show differences in longline gear and operational characteristics within and among countries. These aspects of the data, in addition to difficulties encountered with implementation of the alternating-hook design, pose challenges for analysis of these data.

A standard format for design and evaluation of pond experiments

Details are given of a standard format used by the Pond Dynamics/Aquaculture Collaborative Research Support Program of the US Agency for International Development for the communication of experimental ideas. An example is given of the "Preliminary Proposal Format," which contains a list of information categories or headings as follows: Title; Objectives: Significance; Experimental design; Pond facilities; Stocking rate; Other inputs; Sampling plan; Hypotheses; Statistical methods; Duration; Water management; and Schedule.