Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.

Overcoming hurdles to sustainable industrial fisheries production

(PDF has 25 pages.)

Studies of the effects of industrial pollution in the lower Patapsco river area: 1. Curtis Bay Region 1941

Industrial effluents in the lower Patapsco area, which constitutes the navigable portion of the river and includes Baltimore Harbor, are many and include waste acid, distillery waters, tannery wastes and copper as (ferrous sulphate) from pigment and steel industries. (PDF contains 22 pages (2 on 1)

Problems of industrial fisheries development in the Cross River State

The industrial fisheries as opposed to artisanal fisheries in Cross River State, Nigeria, is discussed, considering the prospect of industrial fisheries in the State and identifying the major fish and shrimp resources within the coastal waters. Industrial fishing was introduced in 1973 when the state government invited a Japaneese company to carry out a joint exploratory shrimp fishing venture. The contributions made by the Seastate Seafoods Company, the Eyib's Nutritional Food and the Arawak Fishing Companies towards the increase in the number of fishing fleet in the state are noted.

Utilization of agro-industrial wastes as fish feedstuffs in Nigeria

Fish feeding accounts for a substantial amount in the variable expenditure of a fish farming enterprises. There is a need to examine closely the potentials and advantages of locally available agro-industrial by-products, as possible substitutes for the conventional feedstuffs which are dwindling in supply, and escalating in their cost. A wide range of by products from plant, animal and industrial processes have been studied and posses nutrient composition which can be exploited as dietary ingredients for warm water species as the Tilapia and Clarias sp. Such useful by-products include poultry feathers, rice bran, soybean hulls and cocoa husks which are discarded as wastes. However, some processing treatments might be required to alleviate the toxic effects of possible anti-nutritional factors in the by-products, for the achievement of optimum benefit

A database for the industrial trawl fishery of Cote d'Ivoire

Fishery statistics for the industrial trawl fishery of Cote d'Ivoire have been well documented since 1968. However, data processing has changed significantly with time and some of the data files have been lost. In 1997, the Centre de Recherches Oceanologiques d'Abidjan decided to retrieve and process all trawl data available from different sources. This paper gives an overview of the database covering the period 1968 to 1997 and describes its coverage, format, structure and use. The database was developed using MS ACCESS and is a powerful tool for storing information about this fishery, and for analysis of its dynamics over a period of 30 years.

Escalation in shrimp production in the Sierra Leone industrial fishery

Applying Turkey's jackknife method on MSY estimates from the surplus production models of Schaefer and Fox showed that the optimum yield for shrimps in industrial fishery in Sierra Leone is estimated at 2,686.8 t with 15,822 fishing days. Annual catch for 1996 was 2,788 t, indicating an escalation in exploitation which, if prolonged, could bring reduced productivity as experienced in the fishery some years ago.