High temperature processing of fish sausage 1. - An improved technique

An improved technique for the preparation of fish sausage (Nemipterus japonicus) over the conventional method (90°degree C for 1 h) has been evolved by processing at a temperature of 115.6°degree C (4.5 kg) for 20 min. The overall quality characteristics of fish sausage, particularly its colour, texture and appearance remained unchanged and the product was in good condition up to 9 days at ambient temperature in contrast to the shelf life of 3 days by conventional method. The design of the equipment used for the processing of fish sausage and the method of operation are described. The keeping quality of the product from an organoleptic stand point was also studied

High temperature processing of fish sausage 2. - Effect of certain preservatives on the shelf life

The effects of preservatives like fat coated sorbic acid (FCSA) and glucono-deltalactone (D-lactone), both separately and in combination, on the shelf life of high temperature (115.6°C for 20 min) processed fish sausage, stored at three different temperatures namely, ambient (28±2° C), cooler storage (2±2°C) and refrigerator (10±2° C) were studied. Whereas the control (without preservative), FCSA, D-lactone and FCSA + D-lactone treated samples could be stored for 9, 11 and 13 days respectively at ambient temperature, those stored at lower temperatures were found to be in acceptable condition for 70 and 80 days respectively. Organoleptic evaluation of taste, flavour the products carried out by panelists revealed that FCSA and FCSA + D-lactone treated samples were unacceptable with regard to the taste, flavour and texture. However, the taste flavour and texture of the control and D-lactone treated samples were in acceptable condition.

High temperature processing of fish sausage 3. - Studies on some of the storage characteristics

The proximate composition of the high temperature processed fish sausage was found to be 14.56% protein, 4.65% fat, 69.14% moisture, 2.12% ash and 8.12% carbohydrate. The quality of the product during storage was assessed on the basis of the changes observed in the physical, chemical and microbiological parameters. The results of the different tests such as pH, volatile base nitrogen (VBN), trimethyl amine nitrogen (TMA-N) and jelly strength are summarized and discussed. The total bacterial load increased gradually during storage but was not proportional to the initial load.

High temperature processing of fish sausage 4. - Heat penetration study

An examination was made of the rate of penetration of heat into fish sausage during processing at 115.6°C. Findings showed processing for 24 minutes to bring about complete destruction of Clostridium botulinum. A processing time of 30 minutes destroys almost all spoilage-causing organisms, thus prolonging the shelf life of the products.

Influence of the Azores high on sea level pressure and wind, and on precipitation, in the Eastern Tropical Pacific Ocean

ENGLISH: Intensification of the Azores high pressure cell in mid-year, with concomitant air flow from the Caribbean into the Pacific, is shown to be responsible for a secondary minimum of precipitation observed along the tropical Pacific coast of the Americas, and to have a measurable effect on wind and precipitation several hundred kilometers offshore. SPANISH: La intensificación de la célula de alta presión de las Azores a mediados del año, y la corriente de aire concomitante que entra al Pacífico procedente del Caribe, se demuestra que es la causante de un mínimo secundario de precipitación observado a lo largo de la costa tropical de las Américas en el Pacífico y que tiene un efecto mensurable sobre el viento y la precipitación varios cientos de kilómetros mar afuera. (PDF contains 23 pages.)

Evaluation of the contribution of fisheries and aquaculture to food security in developing countries

Fish contain important nutrients such as essential fatty acids, iron, zinc, calcium, vitamin A and vitamin C. Production of freshwater fish depends on the strategic application of various management techniques. The demand for fish products has increased beyond the natural supply, resulting in a high pressure on fisheries. Development of aquaculture is necessary for a rapid growth in fish production. A number of constraints hamper the development of aquaculture. Introduction of polyculture technologies in some countries is a way of maximizing production from different levels of the food chain. The roles of women in making fish products available to consumers is frequently over-looked by policy makers. Gender equity in policy-making and management of fisheries and in capacity building is an important issue. Fish production from inland waters and coastal areas can be increased by adopting cage and pen culture systems. Input subsidies and loans to resource poor farmers can boost fish production.

The California flooding rains during February, 1986 [abstract]

After an unusually strong and persistent pattern of atmospheric circulation over the United State[s] in Fall 1985, it became quite changeable (although high amplitude anomalies still prevailed). Following a fall that was cold in the West and warm in the East with heavy precipitation, a high pressure ridge set in over the West during December, with generally light precipitation over most of the country. Throughout the winter, the central North Pacific was very active, with large negative atmospheric pressure anomalies centered at about 45°N, l60°W. This activity may have been encouraged by an enhanced meridional eastern North Pacific sea surface temperature (SST) gradient, with positive SST anomalies in the subtropics and negative anomalies in midlatitudes. However, in January, the western high pressure ridge remained strong and temperatures were remarkably warm, increasing the threat of drought in California after the two previous dry winters. However, in February, storms from a greatly expanded and southerly displaced Aleutian Low broke into the West Coast. An unusual siege from February 11 to February 20 flooded central and northern California, with very heavy precipitation and record to near-record runoff. Upwards of 50 percent of annual average precipitation fell on locations from the upper San Joaquin to the Feather River drainage basins, and the largest flow since observations began in the early 1900's was recorded on the Sacramento River at Sacramento. The atmospheric pattern that was responsible for this remarkable stormy spell developed when the western high pressure retrograded to the northwest into the Aleutians, accompanied by the strengthened and southerly extended storm tract that moved into California. Although exact details vary from case to case, this episode displayed meteorological conditions similar to those in several other historical California winter flood events. These included a long duration of very strong westerly to southwesterly winds over a long subtropical fetch into California. Much of the precipitation during this series of storms was orographically induced by the moisture laden flow rising over the Sierra ranges. Due to the warm air mass, snow levels were relatively high (about 7500 feet) during the heaviest precipitation, resulting in copious runoff.

A mechanism for the link between solar-irradiance variations and regional precipitation

Although the mechanisms of climatic fluctuations are not completely understood, changes in global solar irradiance show a link with regional precipitation. A proposed mechanism for this linkage begins with absorption of varying amounts of solar energy by tropical oceans, which may aid in development of ocean temperature anomalies. These anomalies are then transported by major ocean currents to locations where the stored energy is released into the atmosphere, altering pressure and moisture patterns that can ultimately affect regional precipitation. Correlation coefficients between annual averages of monthly differences in empirically modeled solar-irradiance variations and annual state-divisional precipitation values in the United States for 1950 to 1988 were computed with lag times of 0 to 7 years. The highest correlations (R=0.65) occur in the Pacific Northwest with a lag time of 4 years, which is about equal to the travel time of water within the Pacific Gyre from the western tropical Pacific Ocean to the Gulf of Alaska. With positive correlations, droughts coincide with periods of negative irradiance differences (dry, high-pressure development), and wet periods coincide with periods of positive differences (moist, low-pressure development).

Pacific sea surface temperature associations with southwestern United States summer rainfall and atmospheric circulation

Pacific sea surface temperatures (SSTs) are examined for their associations with (1) summer rainfall, and (2) the latitude location of the mid-tropospheric subtropical high pressure ridge (STR) in the southwestern United States during 1945 to 1986. Extreme northward (southward) displacements of STR are associated with wet (dry) summers over Arizona and an enhanced (weakened) gradient of SST off the California and Baja coasts. These tend to follow winters marked by positive (negative) phases of the PNA, Pacific/North America, teleconnection pattern. Recent decadal variations of Arizona summer rainfall (1950s wet; 1970s dry) appear similarly related to southwestern United States synoptic circulation and eastern Pacific SSTs.

Feasibility study of biofuel production from freshwater fern, Azolla sp in Anzali Wetland

Production of bioethanol through acidic and enzymatic hydrolysis of aquatic Azolla sp., as a new source of bio-mass, has been performed, as a means to control increasing growth and reducing undesirable effects of this plant in Anzali lagoon. After sampling, drying and crushing, Azolla was hydrolyzed, using diluted acid and enzyme. Diluted acid hydrolysis was done using both autoclave and a high-pressure system (Batch Synth® Microwave synthesizer). The effects of temperature and time (in autoclave) and concentration of acid (in both) were compared. Cellubrix®, a ommercial cellulase source, was used for enzymatic hydrolysis process. The amounts of reducing sugars, glucose and furfural, released from hydrolyzate, were measured. To produce alcohol, Sacchromyces cerevisiae (to ferment sixcarbon sugars), Zygowilliopsis californica and Pichia stipitis (to ferment five-carbon and sixcarbon sugars) were used. Maximum amounts of glucose (4.83% w/w) and reducing sugars (14.15% w/w) were obtained using acid hydrolysis in autoclave. In the microwave oven, maximum glucose (5.04% w/w) and reducing sugars (13.27 w/w) were obtained at 180 and 200 °C, respectively. Under these conditions, maximum produced furfural was 1.54 g/L. The difference between amounts of furfural obtained from acid hydrolysis of Azolla in microwave oven compared to autoclave was statistically significant. Amounts of alcohol produced and its yields were 3.99 g/L and 33.13% for S. cerevisiae in 48 hours, 3.73 g/L and 30.45% for Pichia stipites in 48 hours, and 3.73 g/L and 30.45% for Z. californica in 24 hours after inoculation, respectively, with significant differences. Statistical comparison of results showed significant differences (P<0.05) in glucose production, at different conditions. Amounts of reducing sugars and glucose increased after optimization of levels of acid, time, and temperature. The overall optimum released sugar and glucose were obtained with 1.67% (w/v) acid using autoclave. Higher temperatures in microwave oven caused a significant increase (P<0.05) in furfural. Furfural severely inhibits fermentation. Hence, regarding the issues of energy consumption and time, amounts of inhibiting substances and sugar production, autoclave is found to be superior to the high temperature and pressure, generated in microwave oven, for hydrolyzing Azolla. Furthermore, given the amounts of Azolla in Anzali lagoon, it may be recommendable to use this plant as a biomass resource.

Marine Vertebrates and Low Frequency Sound: Technical Report for LFA EIS

Over the past 50 years, economic and technological developments have dramatically increased the human contribution to ambient noise in the ocean. The dominant frequencies of most human-made noise in the ocean is in the low-frequency range (defined as sound energy below 1000Hz), and low-frequency sound (LFS) may travel great distances in the ocean due to the unique propagation characteristics of the deep ocean (Munk et al. 1989). For example, in the Northern Hemisphere oceans low-frequency ambient noise levels have increased by as much as 10 dB during the period from 1950 to 1975 (Urick 1986; review by NRC 1994). Shipping is the overwhelmingly dominant source of low-frequency manmade noise in the ocean, but other sources of manmade LFS including sounds from oil and gas industrial development and production activities (seismic exploration, construction work, drilling, production platforms), and scientific research (e.g., acoustic tomography and thermography, underwater communication). The SURTASS LFA system is an additional source of human-produced LFS in the ocean, contributing sound energy in the 100-500 Hz band. When considering a document that addresses the potential effects of a low-frequency sound source on the marine environment, it is important to focus upon those species that are the most likely to be affected. Important criteria are: 1) the physics of sound as it relates to biological organisms; 2) the nature of the exposure (i.e. duration, frequency, and intensity); and 3) the geographic region in which the sound source will be operated (which, when considered with the distribution of the organisms will determine which species will be exposed). The goal in this section of the LFA/EIS is to examine the status, distribution, abundance, reproduction, foraging behavior, vocal behavior, and known impacts of human activity of those species may be impacted by LFA operations. To focus our efforts, we have examined species that may be physically affected and are found in the region where the LFA source will be operated. The large-scale geographic location of species in relation to the sound source can be determined from the distribution of each species. However, the physical ability for the organism to be impacted depends upon the nature of the sound source (i.e. explosive, impulsive, or non-impulsive); and the acoustic properties of the medium (i.e. seawater) and the organism. Non-impulsive sound is comprised of the movement of particles in a medium. Motion is imparted by a vibrating object (diaphragm of a speaker, vocal chords, etc.). Due to the proximity of the particles in the medium, this motion is transmitted from particle to particle in waves away from the sound source. Because the particle motion is along the same axis as the propagating wave, the waves are longitudinal. Particles move away from then back towards the vibrating source, creating areas of compression (high pressure) and areas of rarefaction (low pressure). As the motion is transferred from one particle to the next, the sound propagates away from the sound source. Wavelength is the distance from one pressure peak to the next. Frequency is the number of waves passing per unit time (Hz). Sound velocity (not to be confused with particle velocity) is the impedance is loosely equivalent to the resistance of a medium to the passage of sound waves (technically it is the ratio of acoustic pressure to particle velocity). A high impedance means that acoustic particle velocity is small for a given pressure (low impedance the opposite). When a sound strikes a boundary between media of different impedances, both reflection and refraction, and a transfer of energy can occur. The intensity of the reflection is a function of the intensity of the sound wave and the impedances of the two media. Two key factors in determining the potential for damage due to a sound source are the intensity of the sound wave and the impedance difference between the two media (impedance mis-match). The bodies of the vast majority of organisms in the ocean (particularly phytoplankton and zooplankton) have similar sound impedence values to that of seawater. As a result, the potential for sound damage is low; organisms are effectively transparent to the sound – it passes through them without transferring damage-causing energy. Due to the considerations above, we have undertaken a detailed analysis of species which met the following criteria: 1) Is the species capable of being physically affected by LFS? Are acoustic impedence mis-matches large enough to enable LFS to have a physical affect or allow the species to sense LFS? 2) Does the proposed SURTASS LFA geographical sphere of acoustic influence overlap the distribution of the species? Species that did not meet the above criteria were excluded from consideration. For example, phytoplankton and zooplankton species lack acoustic impedance mis-matches at low frequencies to expect them to be physically affected SURTASS LFA. Vertebrates are the organisms that fit these criteria and we have accordingly focused our analysis of the affected environment on these vertebrate groups in the world’s oceans: fishes, reptiles, seabirds, pinnipeds, cetaceans, pinnipeds, mustelids, sirenians (Table 1).