Auswirkungen von größeren Steertmaschen bei Grundschleppnetzen auf Plattfischfänge in der Nordsee

The present fishing effort regulation for bottom trawls in the North Sea (EU 40/2008) reduces the fishing effort with larger co-dend mesh sizes (> 100 mm mesh opening) to 86 fishing days per year. The aim of this technical measure is the protection of the weak cod stock usually harvested with this mesh opening. By combining the results of our selectivity investigations on plaice during a commercial fishing trip and the samples taken within the frame of the EU data collection regulation (DCR) we could draw conclusions on commercial and non-commercial fish species. When using codend meshes with larger mesh opening the discard was reduced remarkably. In the reference codend with 80 mm mesh opening the undersized bycatch was 47 % of the total catch of plaice, in the experimental codends with 120 mm mesh opening it was only 7 % and with 130 mm mesh opening just 3 %. On the other hand however, the applied mesh openings in the experimental codends let escape marketable plaice to some extent. The loss of catch was assessed on the basis of fish numbers per length class using a length-weight conversion rate from the DCR. The loss by weight of marketable fish with 120 mm codend mesh opening was 18 %, and 28 % with 130 mm codend mesh opening. To assure the protection of young round and flatfish with one general mesh size, a new regulation should prescribe a minimum mesh opening of 120 mm, accompanied by an expansion of the fishing effort.

Aquaculture in the Baltic Sea area – A concept for joint research of Baltic Sea abutters

A concept for joint research on aquaculture in the Baltic Sea area is presented. It consists of three major parts, the promotion of an aquaculture-based-fisheries, the development of low-output land-based aquaculture systems, and the search for sustainably produced substances from aquatic organisms to be used for different processes. They include substitutes for feeding stuffs or products of importance for medical, biotechnological and industrial applications.

T90-Steert: Letzte Untersuchungen vor der Übernahme ins EU-Regelwerk

After due consideration the EU Commission has decided in December 2005 to admit cod-ends made of netting turned 90 de-grees (T90) as an allowable alternative for the cod fishery of the Baltic. The construction was included as one of two admissibles versions into the newly issued EU regulation 2187/2005 on technical measures for the conservation of fishery resources of the Baltic. This contribution describes some of the investigations preceeding that decision with which some of the previous demurs could be dispelled. In the course of these experiments it was detected that the cod-end netting material plays an important role for the mesh selection of a T90 cod-end, whereas the netting twine diameter is negligible. Problems with modern twine mate-rial have to be taken in consideration for constructional changes of T90 cod-ends. A relation of 1 to 2 in the circumferences in meshes at the joining round between last row of the belly and extension/cod-end turned out to be acceptable. Both the hauling technique (sidetrawler or sterntrawler) and an extensive use in the commercial fishery proved to be of no relevance for to the selection of T90 cod-ends. Taken alone, the different hydrodynamic conditions in a cod-end are insufficient to fully explain the selection phenomena. This was demonstrates by the material-related differences in selectivity of T90 cod-ends.

Eine zusätzliche Möglichkeit für die Ostseedorsch-Fischerei: Steerte aus 90° gedrehtem Netztuch

In 2004, comparative selectivity investigations were made with the now legal BACOMA codend of 110 mm mesh opening and alternative codends made of netting turned 90° of similar mesh openings on both commercial boats and on research vessels. The results show a certain variability of the BACOMA results – depending on ship type and season (L50 varying between 36,8 and 40,6) – and a general equal efficiency of codends made of netting turned 90° of the same mesh opening. Underwater observations and reduced performance of codends of equal circumference in meshes as the joining round at the end of the tapered part of the trawl indicate the need to reduce the relation of the cir-cumferences of codend and extension to 1 to 0.7 to achieve optimum fit and selectivity.

Entwicklung einer einfachen und schnellen Analysenmethode für Kohlenmonoxid in Fisch und Durchführung orientierender Untersuchungen

Treatment with gases containing CO, misleadingly called “tasteless smoke” or “clear smoke”, prior to freezing of fish like tuna, tilapia and swordfish (to name only a few of these species that are characterised by an intensive coloration of flesh) stabilise the fresh red colour of muscle also after thawing and suggest consumers non-existing freshness. In the European Union, carbon monoxide is excluded from being a permitted additive and therefore this handling is not allowed. Notwithstanding of the clear legal position, producers and traders are trying to establish CO treated fish on the market. In the case of taking legal measures the food control laboratories have to provide evidence that fish has been treated by CO and therefore a respective method is necessary. The method of determination of carbon monoxide in fish flesh presently applied requires considerable material and mechanistic effort to detect CO by GC after catalytic transformation into methane. The aim of our work was a direct detection of CO using suitable sensor technology. Mechanistic requirements and results of preliminary investigations to detect carbon monoxide in fish flesh will be described.

Entwicklung einer einfachen und schnellen Analysenmethode für Kohlenmonoxid in Fisch – Teil 2: Methodenoptimierung

After having described in our first paper (Haase et al. 2005) the main features of an easy and fast method for determination of carbon monoxide in fish and the equipment and chemicals necessary as well as first results measured on fish samples, this part deals with the influence of sample preparation, variation of the size of samples, type of solvent, duration of extraction and further conditions on the result of analyses. Both variants of the method are evaluated with regard to measuring expected errors. The single components of the equipment, including prises, are listed to allow a reliable assessment of costs. Additional instrumental colour and DSC measurements on both untreated and CO-treated tuna illustrate the effects.

The BACOMA cod-end. History and recent developments in BACOMA cod-end regulations and a proposal for abetter specification of the BACOMA cod-end for Baltic Sea cod fishery

To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.

Aktuelle Planungen zur Regelung der Beifangproblematik in der Krabbenfischerei

At present the fishery for the brown shrimp (Crangon crangon L.) is one of the most economically rewarding fisheries in Europe. Due to the small size of the target objects this fishery has to be carried out with rather small meshes. As it is, however, performed on the nursing grounds of important fish species it encounters a severe bycatch problem. On this basis, EU Council regulation 850/98 demands the use of either sieve nets or sorting grids from 1 July, and to pass pertaining national bye-laws. Germany discusses to use either sieve nets of 70 mm mesh opening or sorting grids of 20 mm bar distance, and tries to achieve a harmonization of the byelaw with neighbouring countries of The Netherlands and Denmark to ensure equal conditions on the same fishing grounds.

Bearbeitung von Fangproben mit neuen elektronischen Messmethoden

For 10 years the Institute for Fishing Technology, Hamburg (IFH) has been carrying out experiments in the brown shrimp fishery with beam trawls aiming at a reduction of unwanted bycatches. When the tests were transferred to commercial fishery conditions the personnel effort and costs increased markedly. It became e.g. necessary to install a deep-freeze chain to make it possible to evaluate more samples in the laboratory. This again required to increase the number of technicians for measuring the fish and shrimp samples, but also made it necessary to perform this work in the most rational and time-saving way by applying modern electronic aids. Though all samples still have to be sorted by species and have to be weighed and measured the introduction of electronic aids, however, like electronic measuring board and computer-aided image processing system, all weight and length data are immediately and digitally recorded after processing. They are transferred via a network to a server PC which stores them into a purpose-designed database. This article describes the applicationof two electronic systems: the measuring board (FM 100, Fa. SCANTROL), iniated by a project in the Norwegian Institute for Fishing Technology, and a computer-aided image processing system, focussing on measuring shrimps in their naturally flexed shape, also developed in the Institute for Fishing Technology in close collaboration with the University of Duisburg. These electronic recording systems allow the consistent and reproducible record of data independent of the changing day-to-day personal form of the staff operating them. With the help of these systems the number of measurements the laboratory could be maximized to 250 000 per year. This made it possible to evaluate, in 1999, 525 catch samples from 75 commercial hauls taken during 15 days at sea. The time gain in measuring the samples is about one third of the time previously needed (i.e. one hour per sample). An additional advantage is the immediate availability of the digitally stored data which enables rapid analyses of all finished subexperiments. Both systems are applied today in several institutes of the Federal Research Centre. The image processing system is now the standard measuring method in an international research project.

Neues aus der Selektionsforschung am Ostseedorsch

In account of the decision of the IBSFC (International Baltic Sea Fisheries Commission) to admit alternative codend constructions to the presently legal of diamond meshes with 120 mm mesh opening, since seven years a vivid research activity is encouraged at the fishing technology institutions around the Baltic. Though a center of gravity in this field of research lies in the EUproject BACOMA (participants Finland Sweden, Denmark) also the corresponding national institutes of other Baltic countries (Germany, Poland, Russia) have been active with similar investigations. German experiments in 1999 dealt with the effect of the use of netting made of double instead of single yarn on the selectivity. Further research was done on modifications of codends made from netting turned 90° from its original orientation and on simplified versions of the so-called Multipanel codend which consists of three equal diamond and three square mesh panels. The experiments demonstrated on the one hand a definite deterioration of the selective properties in a codend made from double instead of single yarn. Constructional changes in codends made from netting turned 90° on the other hand brought a further improvement of the selectivity of such codends. Finally, the investigations on the Multipanel codend revealed the overwhelming influence of the square mesh panels on the selectivity success. If in a conventional diamond codend three windows are cut out starting 50 cm from the real end of the codend in such a way that the remaining parts have the same breadth as the square mesh panels to insert, the selective effect of such a codend is remarkably improved. According to further preliminary tests this seems to be nearly independent from the type of material used.

Analyse der Beifangreduktion durch Gitternetze in der kommerziellen Garnelenfischerei

Trials for the determination of the magnitude of bycatch reduction by sorting grids used in the commercial brown shrimp fishery were carried out from September to December 1997. Trawls with 9 m beam length were used on different fishing grounds in the estuary of the Elbe River near Cuxhaven. The sorting grids tested were made of stainless steel bars spaced at 18, 20, 22, 26 and 30 mm, built into a cylindrical stainless steel frame with a diameter of 65 cm at an angle of attack of 45 degrees. This frame was positioned between the forenet and codend. Simultaneous hauls were made with a trawl of equal construction but without a sorting grid, and the weighed catch components (fish, discard shrimps and commercial size shrimps) separated by means of a riddle were compared. The composition of the sorted out part of the catch of the sorting grid net could be calculated by comparise the corresponding catch components in both the standard trawl and the sorting grid trawl. According to this the total catch of the beam trawl with the sorting grid is reduced by 18 to 38 % depending on the space between the bars. 7 to 31 % of the sorted out part of the catch consists of fish. The use of the sorting grid, however, also leads to losses of 4 to 12 % in Oktober. Per hour of towing this means a loss of 10,3 % commerical size shrimps with a sorting grid of 18 mm space between the bars and of 12,4 % for a 26 mm grid.

Analyse der Beifangreduktion durch Trichternetze in der kommerziellen Garnelenfischerei

Trials for the determination of the magnitude of bycatch reduction by the sievenets used in the commercial brown shrimp fishery were carried out from September to December 1997. Trawls with 9 m beam length were the subjected to the investigation. They were used on different fishing grounds in the estuary of the Elbe near Cuxhaven. Sievenets with 50, 60 and 80 mm mesh opening were tested in 29 hauls and 31.6 h total duration. A trawl of equal construction without sievenets fished synchronously was used for comparison. The proportional catch composition in the codend was determined by weighing the catch components (fish, discard shrimps and commercial size shrimps) as separated by means of a riddle. The composition of the sorted out part of the catch could be calculated by comparison of the corresponding catch components both in standard trawl and sievenettrawl. According to this the total catch of a beam trawl with sievenet is diminished by 9 to 34 % depending on the mesh opening of the sievenet. 32 to 58 % of the sorted out part of the catch consists of fish. Use of a sievenet, however, also leads to a loss of 6 to 15 % of commercial size shrimps. Per hour of towing this means a loss of 8.7 kg commercial size shrimps with a sievenet of 60 mm mesh opening and of 1.8 kg for a mesh size of 80 mm.

Weitere Untersuchungen zur Selektion des Ostseedorsches mit neuartigen Steertkonstruktionen

Trotz der 1993 getroffenen Entscheidung der Internationalen Ostseefischereikommission, die Steertmaschenmindestöffnung von 105 auf 120 mm zu erhöhen, hat sich die allgemeine Situation der Dorschbestände in der zentralen Ostsee (Ernst 1998) bisher nicht verbessert. Man muß daher fragen, warum bisher keine wirksamen technischen Maßnahmen zum Schutz der Jungfische eingeführt und durchgesetzt worden sind. Die Entscheidung zur Einführung einer erhöhten Steertmaschenöffnung wurde 1993 bereits durch Einsprüche der Praxis relativiert. Es wurde von der Fischereipraxis verlangt, alternative Steertkonstruktionen zuzulassen, die es gestatten würden, die mit einem Steertwechsel verbundene Kosten zu minimieren. Dem war mit der Maßgabe zugestimmt worden, daß für solche alternativen Steerte der Nachweis geführt wird, daß mindestens 50 % der Dorsche von 38 cm Länge noch entkommen können. Zwei neuartige Steertformen, die sogenannte "schwedische" und die "dänische" (Dahm und Thiele 1996), wurden dann - allerdings ohne solchen gesicherten Nachweis - in das Regelwerk der Ostseefischereikommission aufgenommen und als zulässig erklärt.

Erster Einsatz von Trenngittern in der kommerziellen Garnelenfischerei

Comparative fishing trials were conducted in the river Elbe estuary using 9 m commercial brown shrimp beam trawls. To avoid the bycatch of fish a metal sorting grid of the Nordmöre type was used. The elliptical grid was constructed of 6 mm stainless steel bar with a spacing of 20 mm between the bars and housed in a cylindrical frame of 800 mm diameter. It was installed in the extension piece just in front of the codend. The inclination of the grid was 45 degrees. A fish outlet was provided in the upper panel of the trawl at the upper edge of the grid. A series of 8 tows of 15 min duration at a towing speed of 3 kns was done. For evaluation the catch of the main codend was compared to the portion of the catch escaped through the grid. The presence of the grid caused a 97.4 % reduction of the catch of lump sucker, a 90.6 % reduction of the catch of sea scorpion, a 79.3 % reduction of the catch of cod, a 58.8 % reduction of the catch of armed bullhead, a 39.6 % reduction of the catch of dab, a 34.7 % reduction of the catch of flounder, a 32.3 % reduction of the catch of smelt, a 19.8 % reduction of the catch of plaice and a 14.5 % reduction of the catch of brown shrimp.

Analyse des Fluchtverhaltens von Fischen auf Schiffsgeräusche mit hydroakustischen Methoden

Investigations on the avoidance reactions of pelagic schooling fish (herring and sprat) released by an approaching fishery vessel were carried out during the 378th cruise of FRC "Solea" from 25 September to 3 October 1995 in the Arkona Sea, southern Baltic. An echosounder system EK 500/BI500 with a 38 kHz transducer mounted on a towed body as weIl as a 120 kHz hull mounted transducer were used. Fish densities were measured synchronously as well as under the ship as at a laterally distances from the ship by the transducer of the towed body. By these means the variation of fish densities up to a certain distance from the ship is possible. The advantage of using an echo integrating system for these measurements is, that it works also for not schooling fish and under conditions where schooling fish disperse (e.g. at night).