Developing alternatives for optimal representation of seafloor habitats and associated communities in Stellwagen Bank National Marine Sanctuary

The implementation of various types of marine protected areas is one of several management tools available for conserving representative examples of the biological diversity within marine ecosystems in general and National Marine Sanctuaries in particular. However, deciding where and how many sites to establish within a given area is frequently hampered by incomplete knowledge of the distribution of organisms and an understanding of the potential tradeoffs that would allow planners to address frequently competing interests in an objective manner. Fortunately, this is beginning to change. Recent studies on the continental shelf of the northeastern United States suggest that substrate and water mass characteristics are highly correlated with the composition of benthic communities and may therefore, serve as proxies for the distribution of biological biodiversity. A detailed geo-referenced interpretative map of major sediment types within Stellwagen Bank National Marine Sanctuary (SBNMS) has recently been developed, and computer-aided decision support tools have reached new levels of sophistication. We demonstrate the use of simulated annealing, a type of mathematical optimization, to identify suites of potential conservation sites within SBNMS that equally represent 1) all major sediment types and 2) derived habitat types based on both sediment and depth in the smallest amount of space. The Sanctuary was divided into 3610 0.5 min2 sampling units. Simulations incorporated constraints on the physical dispersion of sampling units to varying degrees such that solutions included between one and four site clusters. Target representation goals were set at 5, 10, 15, 20, and 25 percent of each sediment type, and 10 and 20 percent of each habitat type. Simulations consisted of 100 runs, from which we identified the best solution (i.e., smallest total area) and four nearoptimal alternates. We also plotted total instances in which each sampling unit occurred in solution sets of the 100 runs as a means of gauging the variety of spatial configurations available under each scenario. Results suggested that the total combined area needed to represent each of the sediment types in equal proportions was equal to the percent representation level sought. Slightly larger areas were required to represent all habitat types at the same representation levels. Total boundary length increased in direct proportion to the number of sites at all levels of representation for simulations involving sediment and habitat classes, but increased more rapidly with number of sites at higher representation levels. There were a large number of alternate spatial configurations at all representation levels, although generally fewer among one and two versus three- and four-site solutions. These differences were less pronounced among simulations targeting habitat representation, suggesting that a similar degree of flexibility is inherent in the spatial arrangement of potential protected area systems containing one versus several sites for similar levels of habitat representation. We attribute these results to the distribution of sediment and depth zones within the Sanctuary, and to the fact that even levels of representation were sought in each scenario. (PDF contains 33 pages.)

Challenges in using science-based shoreline setbacks: Examples from South Carolina

Beachfront jurisdictional lines were established by the South Carolina Beachfront Management Act (SC Code §48- 39-250 et seq.) in 1988 to regulate the new construction, repair, or reconstruction of buildings and erosion control structures along the state’s ocean shorelines. Building within the state’s beachfront “setback area” is allowed, but is subject to special regulations. For “standard beaches” (those not influenced by tidal inlets or associated shoals), a baseline is established at the crest of the primary oceanfront sand dune; for “unstabilized inlet zones,” the baseline is drawn at the most landward point of erosion during the past forty years. The parallel setback line is then established landward of the baseline a distance of forty times the long-term average annual erosion rate (not less than twenty feet from the baseline in stable or accreting areas). The positions of the baseline and setback line are updated every 8-10 years using the best available scientific and historical data, including aerial imagery, LiDAR, historical shorelines, beach profiles, and long-term erosion rates. One advantage of science-based setbacks is that, by using actual historical and current shoreline positions and beach profile data, they reflect the general erosion threat to beachfront structures. However, recent experiences with revising the baseline and setback line indicate that significant challenges and management implications also exist. (PDF contains 3 pages)

Shoal manipulation as an effective solution to site specific beach management, examples from three South Carolina beaches

Soft engineering solutions are the current standard for addressing coastal erosion in the US. In South Carolina, beach nourishment from offshore sand deposits and navigation channels has mostly replaced construction of seawalls and groins, which were common occurrences in earlier decades. Soft engineering solutions typically provide a more natural product than hard solutions, and also eliminate negative impacts to adjacent areas which are often associated with hard solutions. A soft engineering solution which may be underutilized in certain areas is shoal manipulation. (PDF contains 4 pages)

Effect of type of otolith and preparation technique on age estimation of larval and juvenile spot (Leiostomus xanthurus)

Otoliths of larval and juvenile fish provide a record of age, size, growth, and development (Campana and Neilson, 1985; Thorrold and Hare, 2002). However, determining the time of first increment formation in otoliths (Campana, 2001) and assessing the accuracy (deviation from real age) and precision (repeatability of increment counts from the same otolith) of increment counts are prerequisites for using otoliths to study the life history of fish (Campana and Moksness, 1991). For most fish species, first increment deposition occurs either at hatching, a day after hatching, or after first feeding and yolksac absorption (Jones, 1986; Thorrold and Hare, 2002). Increment deposition before hatching also occurs (Barkmann and Beck, 1976; Radtke and Dean, 1982). If first increment deposition does not occur at hatching, the standard procedure is to add a predetermined number to increment counts to estimate fish age (Campana and Neilson, 1985).

Chalk rivers: nature conservation and management

This is a handbook about Chalk Rivers Nature Conservation and Management from March 1999 by the Water Research Centre and commissioned by English Nature and the Environment Agency, primarly provides an objective basis for formulating conservation strategies for relevant Site of Special Scientific Interest (SSSIs) and Special Areas of Conservation (SACs). It was also seen as being applicable to chalk rivers more generally and has increasingly been regarded as important to the work of the Biodiversity Action Plan Steering Group on chalk rivers, which is led by the Environment Agency. This report contains information on characteristic wildlife communities, their habitat requirements and the ecological impact of activities that are relevant to the chalk river environment. It provides guidance on setting management objectives, options for mitigating impacts, and measures for the maintaining and enhancing the river channel, riparian and floodplain areas associated. The term `chalk river’ is used to describe watercourses dominated by groundwater discharge from chalk geology, including those that flow over a range of non-chalk surface geologies at various points along their length. England contains numerous examples of this river type, located in and downstream of areas of outcropping chalk in the south, East Anglia and up into Lincolnshire and Yorkshire. Indeed, England has the major part of the chalk river resource of Europe. A number of chalk rivers have been designated as Sites of Special Scientific Interest (SSSIs) and English Nature and Environment Agency work drawing up joint conservation strategies.

Sampling design tool for ArcGIS: Instruction manual.[for ESRI ArcGIS 10.0 Service Pack 3 or higher]

The Biogeography Branch’s Sampling Design Tool for ArcGIS provides a means to effectively develop sampling strategies in a geographic information system (GIS) environment. The tool was produced as part of an iterative process of sampling design development, whereby existing data informs new design decisions. The objective of this process, and hence a product of this tool, is an optimal sampling design which can be used to achieve accurate, highprecision estimates of population metrics at a minimum of cost. Although NOAA’s Biogeography Branch focuses on marine habitats and some examples reflects this, the tool can be used to sample any type of population defined in space, be it coral reefs or corn fields.

Manual for the Sampling Design Tool for ArcGIS

The Biogeography Branch’s Sampling Design Tool for ArcGIS provides a means to effectively develop sampling strategies in a geographic information system (GIS) environment. The tool was produced as part of an iterative process of sampling design development, whereby existing data informs new design decisions. The objective of this process, and hence a product of this tool, is an optimal sampling design which can be used to achieve accurate, high-precision estimates of population metrics at a minimum of cost. Although NOAA’s Biogeography Branch focuses on marine habitats and some examples reflects this, the tool can be used to sample any type of population defined in space, be it coral reefs or corn fields.

River salinity variations in response to discharge: examples from the western United States during the early 1900s

Major controls on river salinity (total dissolved solids) in the western United States are climate, geology, and human activity. Climate, in general, influences soil-river salinity via salt-balance variations. When climate becomes wetter, river discharge increases and soil-river salinity decreases; when climate becomes drier river discharge decreases and soil-river salinity increases. This study characterizes the river salinity response to discharge using statistical-dynamic methods. An exploratory analysis of river salinity, using early 1900s water quality surveys in the western United States, shows much river salinity variability is in response to storm and annual discharge. Presumably this is because river discharge is largely supported by surface flow.

Risk analysis in aquaculture: A step-by-step introduction with worked examples

This publication is based on materials covered and outputs generated during the Workshop on Risk Assessment Methodologies and Tools for Aquaculture in Sub-Saharan Africa, which was jointly held by WorldFish and FAO in Siavonga, Zambia on 28 June - 2 July 2010. The workshop was delivered as a training exercise to 17 participants from seven sub-Saharan countries and was designed to highlight current methodologies and tools available for environmental risk analysis in aquaculture development. A key focus of the workshop was to encourage participants to consider hypothetical but realistic scenarios and to discuss issues relevant to evaluating the environmental risks of a given activity or scenario. This publication presents selected scenarios from the workshop and the outcomes of the deliberative process as developed by the participants. This publication is factual but not comprehensive, therefore any statements or estimations of risk do not represent the actual risks arising from the described scenario. It is intended to serve as an easily readable introduction to risk analysis, highlighting worked examples that will provide guidance on how a risk analysis may be approached in a similar situation.

Studies on the preparation of fish silage. 1. Effect of quality of raw material and type of acid

An experiment was undertaken in which silver bellies (Leiognathus splendens) of different quality were used to produce silages using different concentrations of hydrochloric acid and formic acid. The quality and storage life of the various preparations are reported. Silages which keep for at least 30 days can be produced from silver belly held for 3 or 12 hours at 28°C by: 1) reducing the pH by addition of hydrochloric acid; 2) adding 0.5% formic acid and reducing the pH to 3.5 with hydrochloric acid; or 3) adding 2.5% formic acid.

Incidence of ulcer type of disease in wild fishes of Bangladesh

Disease occurred in wild fish species investigated in different water bodies like canals, ditches, beel, haor, flood plain in 17 districts of Dhaka division. Haemorrhagic lesions were observed on the body surface of affected fishes. Incidence of the disease in the investigated water bodies ranged from 0 to 100%. In total 19 fish species were found to be affected and prevalence of infection ranged from 0.0 to 100.0%. Channa punctatus and Puntius ticto were severely affected in all locations. Percentage of infection in these fishes ranged from 0.0 to 100.0. The highest infection was observed in Netrokona, Kishoreganj, and Mymensingh districts. Bacterial genera isolated from the lesions of these affected fishes were Aeromonas, Pseudomonas, Flavobacterium, Micrococcus, and Staphylococcus. Among these isolates Aeromonas was the dominant. Abundance of Aeromonas in the lesions among the investigated bacteria ranged from 75 to 90%. Five identified Aero monas lrydrophila were examined for their pathogenicity and were able to infect the experimental fish, silver barb (Puntius gonionotus). The pathogen Aeromonas hydrophila was thus considered to have an association with the outbreak of ulcer type of disease in the investigated fish species.

Modification to the bilge and sea water pumps fitted in 17.5 metre Jingha type trawlers

This paper brings out the difficulties encountered with the Bilge and sea water circulating pumps which are fitted and drawn in series along with a fresh water pump in the 17.5 m fishing trawlers.