Mechanization of fishing craft and the use of improved fishing gear

Since the year 1925, attention has been focused periodically on the stagnation in the local fishing industry, and those who have studied the subject have been unanimous about the need to introduce modern fishing craft which are capable of working more fishing gear. This report outlines the stages through which the evolution of more effective fishing operations has progressed, both in the gradually increasing use of mechanical propulsion for boats and in the adoption of more modern gear and techniques by local fishermen. No reference is made in this report to the operation of deep-sea trawlers (Sivalingam, 1956) a phase of development which has hitherto not influenced the local fishing industry to any appreciable extent.

Comparative efficiencies of mechanized fishing crafts introduced in India

India started mechanization of fishing craft in early 1950. The traditional craft was subjected to technical scrutiny and some of them mechanized with good results. However, due to limitations inherent in the traditional craft, it was found necessary to develop new series of crafts suitable for the operation of modern fishing gears in areas hitherto unexplored. The impetus given to the development of infrastructure like freezing, canning and ice plants, and quickly expanding export market, increased the demand for marine products, hence craft for immediate, as well as long-term needs had to be introduced. In this article the author discusses design of fishing vessels, information from experience used in development of vessels, designs of distant water vessels, productivity studies, income and expenditure, economic values, production cost, and productivity.

Development of design and construction of fishing boats in Uganda

Fishing boats and canoes varied very little in Uganda from the middle of the 19th century umil 1949. types in use being the Dug Out Canoe. up to 40 ft. in length with 4 ft. beam hollowed from trees, and "Sesse" canoes which were used on Lake Victoria; these had an obvious Arab influence. The length of the "Sesse" in recent years as from about 1912 is 28 ft., and it is used as an open fishing craft.

Energy analysis of the ring seine operations, off Cochin, Kerala

Ring seines are lightly constructed purse seines adapted for operation in the traditional sector. Fish production and energy requirement in the ring seine operations, off Cochin, Kerala, India are discussed in this paper, based on data collected during 1997- 1998. The results reflect the Gross Energy Requirement (GER) situation that existed during 1997-1998. Mean catch per ring seiner per year worked out to be 211.9 t of which sardines (Sardinella spp.) constituted 44.3%, followed by Indian mackerel (Rastrelliger kanagurta) 29.7%, carangids 11.4%, penaeid prawns 2.2%, pomfrets 1.1% and miscellaneous fish 11.3%. Total energy inputs into the ring seine operations were estimated to be 1300.8 GJ. Output by way of fish production was determined to be 931.85 GJ. GER is the sum of all non-renewable energy resources consumed in making available a product or service and is a measure of intensity of non-renewable resource use. GER per tonne of fish landed by ring seiners was estimated to be 6.14. Among the operational inputs, kerosene constituted 73.4% of the GER, followed by petrol (12.7%), diesel (6.7%) and lubricating oil (2.4%). Fishing gear contributed 3.8%, engine 0.8% and fishing craft 0.3% of the GER. Energy ratio for ring seining was 0.72 and energy intensity 1.40.

Biodeterioration of wooden boats: a major problem facing marine fisheries

In India, the fishing industry alone incurs an annual loss of over 120 million rupees on account of biodeterioration of wooden fishing craft. None of the timber species, currently in demand for boat-building, possesses an natural bioresistance and will be completely destroyed within 6 to 12 months. Preventive measures against biodeterioration range from application of several indigenous formulations to metallic sheathings and pressure impregnation of wood with preservative chemicals. These methods do not provide lasting protection, as each has its own short-comings and inadequacies. The need for long-term research in the field of marine biodeterioration for improving the efficiency of currently known control measures, with emphasis on application of non-polluting biological methods, is stressed.

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear

Gears and craft of Karwar: an overview

An account is given of the different types of gears and craft used to catch the pelagic and demersal fish in the inshore and estuary waters of Karwar, India. The main types of craft used during the fishing season September-May are: rampani boats, yendi boats, out-rigger boats, plank-built and dug-out canoes; important gears include: rampani, yendi, shore-seines, gill nets, boat seines, drift nets and hook and lines. Mechanized fishing, introduced during the sixties and seventies, included trawling and purse-seining. The types of gears used by the traditional fishermen depend on local conditions, seasons and distance covered from the shore. The major share to the total landings of fish in Karwar coast is brought mainly by the mechanized craft.

Fishing gear research at the Central Institute of Fisheries Technology

The Craft and Gear Wing of the Central Institute of Fisheries Technology was established to develop the country's fishing boats and implements scientifically and systematically. The Wing was organized in the year 1957 as a part of the fisheries development schemes included under the Second Five Year Plan.

On the troll line investigations off Cochin during five fishing seasons. Pt. 1. Investigations during 1960-61 and 1961-62 seasons

There is apparently great scope for improvement of the design and operational aspects of the gear particularly for the effective exploitation of seasonal fisheries like that of seer, tuna, barracuda etc. In order to evolve improved, yet cheap trolling gear regular investigations were undertaken by the Craft & Gear Wing of the Central Institute of Fisheries Technology, off Cochin for five fishing seasons and the results of these studies are incorporated in this paper.

Problems facing the deep-sea fishing industry in Sri Lanka

Fishing in Sri Lanka has been carried on largely with the use of traditional methods and in recent years there has been a marked increase in the use of mechanized craft for fishing. Although some effort has been made in the sphere of deep-sea fishing both by trawlers and long line tuna boats, such efforts have not made a significant contribution towards improving the industry. The progress of deep-sea fishing in Sri Lanka has been hindered due to a number of reasons described by the author.

Development of a fishing log for use in trawlers

The paper describes the technical and operational features of a composite equipment for simultaneous measurement of five important parameters, warp load, boat speed, water temperature, water salinity and air temperature pertaining to the craft, gear and the environment. The equipment is designed for continuous measurement in small and medium crafts easily without disturbance to routine fishing operations. The system operated on 9V supply, is suitable for portable operations from one vessel to another. The compact electronic meter kept in the wheel-house displays the data one by one in engineering units.

Commercial small craft pair trawling trials Lake Chilwa, Malawi 1971

The results are reported of commercial small craft pair trawling trials conducted on Lake Chilwa from May to August 1971. Type of vessels and equipment used and the fishing method and operation employed are described and design data given for the different trawls used. The effects on catching efficiency of varying amounts of small mesh netting trawls are dealt with and recommendations made for trawls design modifications.

Proposal for improving fishing opportunities off Pt. Loma by construction of an artificial reef

(Document pdf contains 42 pages)