Turbidity and the suspended sediment load of the regulated River Tees

The physical effects of river regulation in the U.K. by impoundments have attracted most attention from hydrologists and engineers concerned with predicting and maintaining discharge regimes for water supply. Grimshaw & Lewin (1980) suggested two basic methods to investigate the effects of regulation on suspended sediment discharge: (i) Compare the river load before and after reservoir construction, and (ii) adopt a paired catchment approach. The former method assumes stationarity of process in the natural system. The latter method, involving selecting two adjacent catchments of similar physical attributes, one regulated and one unregulated, assumes constancy of process spatially. In this report both approaches are adopted to examine the turbidity and suspended sediment concentration regime of the regulated River Tees. Neither approach was entirely satisfactory in the present case. This report examines the discharge and turbidity record consisting of approximately 4000 paired data points, representative of an 11-year post-impoundment period, that has been examined for the River Tees at Broken Scar, Darlington. A small amount of suspended sediment concentration data was also processed: these data are representative of both the pre-impoundment and post-impoundment sediment regime.

Dividing population genetic distance data with the software Partitioning Optimization with Restricted Growth Strings (PORGS): an application for Chinook salmon (Oncorhynchus tshawytscha), Vancouver Island, British Columbia

A new method of finding the optimal group membership and number of groupings to partition population genetic distance data is presented. The software program Partitioning Optimization with Restricted Growth Strings (PORGS), visits all possible set partitions and deems acceptable partitions to be those that reduce mean intracluster distance. The optimal number of groups is determined with the gap statistic which compares PORGS results with a reference distribution. The PORGS method was validated by a simulated data set with a known distribution. For efficiency, where values of n were larger, restricted growth strings (RGS) were used to bipartition populations during a nested search (bi-PORGS). Bi-PORGS was applied to a set of genetic data from 18 Chinook salmon (Oncorhynchus tshawytscha) populations from the west coast of Vancouver Island. The optimal grouping of these populations corresponded to four geographic locations: 1) Quatsino Sound, 2) Nootka Sound, 3) Clayoquot +Barkley sounds, and 4) southwest Vancouver Island. However, assignment of populations to groups did not strictly reflect the geographical divisions; fish of Barkley Sound origin that had strayed into the Gold River and close genetic similarity between transferred and donor populations meant groupings crossed geographic boundaries. Overall, stock structure determined by this partitioning method was similar to that determined by the unweighted pair-group method with arithmetic averages (UPGMA), an agglomerative clustering algorithm.

A rapid procedure for the approximation of bacterial load in fishery products

The production of colour by homogenised fish material in a simplified sugar medium containing and acid indicator has been made use of for the rapid approximation of bacterial load in such products. The medium thus developed contains poptone, tryptone, yeast extract, sodium chloride and beef extract besides dextrose. The time of colour production is influenced to some extent by the level of sodium chloride in the medium and is almost always inversely proportional to the bacterial load in the homogenate.

Optimization of stocking density for environmental-friendly improved extensive shrimp farming system in south-west part of Bangladesh

An experimental culture practice of P. monodon on extension approach was conducted in two brackish water earthen ponds of Demonstration Farm and Training Center (DFTC), Kaliganj, Satkhira. The experiment was aimed to provide farmers with appropriate technology that can immediately improve pond yield with keeping the environment in friendly condition. For optimization of stocking density of a cost effective environmental friendly improved extensive shrimp farming, the ponds were stocked with coastal river post larvae of P. monodon at the stocking rates of 2 pls/m² and 2.5 pls/m² without supplementary feeding. To control experimental error another five farmer's gher were used as replicates of each demo-pond. Considering the farmers buying ability, cost of inputs and other facilities kept minimal. The impact of stocking density was evaluated on the basis of growth, survival rate, production and economic return. Better production (average 299.01 kg/ha) with same survival rate (39.33%) were found with a stocking density of 2.5 pls/m² without causing any deterioration in the culture environment.

Bacterial load in pond water and different organs of a Indian major carp Cirrhinus mrigala Ham.

During the study period (August, 1993 to July,l994) the mean bacterial load in surface water was found to vary from 1.39 xl05 (July'94) to 3.llxl07CFU/ml (September'93), while that of botrom water ranged from l.Olxl06 (May'94) to 5.90xl07CFU/ml (October '93). The mean total number of bacterial load in body slime, liver and kidney was found to vary from 0.58xl03 (July'94) to 2.37xl07CFU/g (March'94),from 0.22xl03(July'94)to 9.64xl06 CFU/g (March'94) from O.l5xl03 (July'94) to 9.36xl06 CFU/g (March'94), respectively. Bacterial load in slime was significantly correlated with bacterial load in liver, bacterial load in slime was significantly correlated with bacterial load in kidney and bacterial load in liver was significantly correlated with bacterial load in kidney.

Portable electronic warp load meter

A portable type warp load meter has been developed for the use in fishing trawlers. The instrument enables to monitor the warp load in fishing trawlers accurately and easily without disturbing the routine fishing operations. The instrument can be used in several other places like cranes, bollard tests for marine engines, dry docks etc. especially when the operation has to be conducted easily without disturbing the load system. The information displayed in micro ammeter in the range 0 to 1000 kg can be fed to continuous recorders for detailed analysis and permanent records.

Response of extract release volume to the variations in pH and microbial load during spoilage of fish at refrigeration temperature

This report briefly describes the microbial status and storage properties of fish raised under composite fish culture in sewage fed ponds.

Preservation of Sardinella longiceps in iced and chilled seawater. Part 1 - Changes during storage with particular reference to bacterial load and nitrogenous compounds

Oil sardines in prime condition were subjected to onboard chilling. Two lots were chilled in CSW (samples C and CI), a third lot was chilled in crushed ice (sample I) and a fourth lot left not iced on deck (Sample AI). Upon landing sample AI was iced and sample CI was removed from the CSW and iced. All the four samples were kept in a chilled room for storage studies. The fish chilled and stored in CSW recorded the least, and the fish subjected to delayed icing, the highest values for all the indices of spoilage namely, free amino nitrogen, trimethylamine (TMA) and total volatile base nitrogen (TVBN). The total psychrophilic bacterial number also showed a similar trend. The organoleptic assessment of the cooked samples revealed C I, CI, AI to be the order of preference throughout the storage. This assessment was found to hold good for the rest of the parameters as well. The CSW held fishes were found to be distinctly superior to the iced ones for the first five days of storage. Such a marked prevalence in quality for five days would suffice for the fish to fetch a premium in the market over other landings of the same fish whether chilled or not chilled. Chilling on board in CSW and icing the same after landings, did not show encouraging results.

Optimization of dose of methyltestosterone (MT) hormone for sex reversal in tilapia (Oreochromis niloticus L.)

This paper describes the optimization of dose of methyltestosteronei (MT) hormone for masculinization of tilapia (Oreochromis niloticus). Five treatments (i.e. T1 T2, T2, T4 and T5) with different doses such as 0, 40, 50, 60 and 65 mg of MT hormone were mixed with per kg of feed for each treatment and fed the fry four times a day up to satiation for a period of 30 days. The stocking density was maintained 10 spawn/liter of water. The growth of fry at different treatments was recorded weekly and mortality was recorded daily. At the end of hormone feeding the fry were reared in hapas fixed in ponds for another 70 days and at the 100th day the fish were sexed by the gonad squashing and aceto-carmine staining method. The analysis of growth data did not show any significant variation in length and weight of fish among the different treatments. High mortality of fry ranging 66% to 81.6% was observed in different treatments and highest mortality was observed during the first twelve days of the experiment. The sex ratio analysis showed that T2 (40 mg/kg) and T5 (65 mg/kg) produced 93.33% of sex reversed male and T3 (50 mg/kg) and T4 (60 mg/kg) produced 96.66% sex reversed male, and these ratios were significantly (p<0.05) different from 1:1 male: female sex ratio. The control, T1 (0 mg/kg) contained 43.33% male progeny. From these results it is suggested that either 50 mg/kg or 60 mg/kg of MT with a feeding period of 30 days could be considered as an optimum dose for masculinization of tilapia (O. niloticus).