Effects of natural gas pipeline condensate and crude oil spills, and comments on remediation, with emphasis on south Louisiana salt marshes: a review

This report reviews some of the natural ecological processes at work within a salt marsh as they relate to a spill of natural gas condensate - a mixture of aliphatic hydrocarbons, n-hexane, benzene, toluene, and xylene. It also reviews the environmental impacts of some of the components of natural gas condensate as well as related compounds (crude oil, higher molecular weight hydrocarbons, polycyclic aromatic hydrocarons - PAHs, linear alkyl-benzenes - LABs, etc.) on salt marsh ecosystems in southern Louisiana and elsewhere in the world. The behavior and persistence of these compounds once they have entered the environment is also considered.

Recommendation domains for pond aquaculture

This publication introduces the methods and results of a research project that has developed a set of decision-support tools to identify places and sets of conditions for which a particular target aquaculture technology is considered feasible and therefore good to promote. The tools also identify the nature of constraints to aquaculture development and thereby shed light on appropriate interventions to realize the potential of the target areas. The project results will be useful for policy planners and decision makers in national, regional and local governments and development funding agencies, aquaculture extension workers in regional and local governments, and researchers in aquaculture systems and rural livelihoods. (Document contains 40 pages)

Recommendation domains for pond aquaculture: country case study: development and status of freshwater aquaculture in Bangladesh

This report is an output of the project “Determination of high-potential aquaculture development areas and impact in Africa and Asia”. This monograph is the case study for Cameroon. Written in three parts, it describes the historical background, practices, stakeholder profiles, production levels, economic and institutional environment, policy issues, and prospects for aquaculture in the country. First, it documents the history and current status of the aquaculture in the country. Second, it assesses the technologies and approaches that either succeeded or failed to foster aquaculture development and discusses why. Third, it identifies the key reasons for aquaculture adoption.

Recommendation domains for pond aquaculture: country case study: development and status of freshwater aquaculture in Henan Province, China

This monograph is the case study for China, with a particular focus on Henan Province, the project location. Written in three parts, it first describes the historical background, production levels and trends, economic and institutional environment, policy issues, and market situation in China in general. The main part of the study presents findings from two different surveys conducted in Henan Province. County-level information is used to analyze the current situation of aquaculture, providing a more disaggregated picture than what is generally available from national statistics. Data collected in a survey of fish farmers in two locations in Henan are then analyzed with regard to the prevailing aquaculture technology and production practices, economic performance of pond fish farming, and the key reasons for aquaculture adoption. In the final chapter, constraints and opportunities for the aquaculture sector in China in general are discussed. (pdf contains 68 pages.)

Design for Survival: Sustainability for Planet and Structure

Buildings in Port Aransas encounter drastic environmental challenges: the potential catastrophic storm surge and high winds from a hurricane, and daily conditions hostile to buildings, vehicles, and even most vegetation. Its location a few hundred feet from the Gulf of Mexico and near-tropical latitude expose buildings to continuous high humidity, winds laden with scouring sand and corrosive salt, and extremes of temperature and ultraviolet light. Building construction methods are able to address each of these, but doing so in a sustainable way creates significant challenges. The new research building at the Marine Science Institute has been designed and is being constructed to meet the demand for both survivability and sustainability. It is tracking towards formal certification as a LEED Gold structure while being robust and resistant to the harsh coastal environment. The effects of a hurricane are mitigated by elevating buildings and providing a windproof envelope. Ground-level enclosures are designed to be sacrificial and non-structural so they can wash or blow away without imposing damage on the upper portions of the building, and only non-critical functions and equipment will be supported within them. Design features that integrate survivability with sustainability include: orientation of building axis; integral shading from direct summer sunlight; light wells; photovoltaic arrays; collection of rainwater and air conditioning condensate for use in landscape irrigation; reduced impervious cover; xeriscaping and indigenous plants; recycling of waste heat from air conditioning systems; roofing system that reflects light and heat; long life, low maintenance stainless steel, high-tensile vinyl, hard-anodized aluminum and hot-dipped galvanized mountings throughout; chloride-resistant concrete; reduced visual impact; recycling of construction materials.

Dehydration of prawns in tunnel dryers

This paper deals with the dehydration of prawns in a tunnel dryer. Conditions required to produce an end-product of desired colour, shape and texture as well as good reconstitution and organoleptic properties which are not obtained in the normal hot air drying, have been worked out. An initial temperature and relative humidity of 90°C. and 85%-90% respectively and an air velocity not more than 1 metre/second are the essential conditions required. Both temperature and relative humidity are to be reduced to 70°C and 40% respectively after about an hour's operation, till the drying is complete. Flavour of the reconstituted product is close to that of the fresh cooked prawns and the texture is judged to be soft. Drying time required to reduce the moisture content of fresh prawns to 15% level is about 7 hours compared to 6-7 hours in normal hot air drying and more than 36 hours in sun-drying.

Effects of different types of drying on the nutritive value of proteins in the fishmeals

A comparative study on the effect of different types of drying on the nutritive value of the proteins in the different fishmeals of known history was made. From the observations, it is clear that the mode of drying has got little or no effect on the nutritive value of the meal as revealed by the chemical indices of available lysine and pepsin digestibility, provided enough precautions were taken to avoid scorching during drying process. Sun dried meals are in no way inferior to the meals prepared by hot-air, steam or vacuum drying.

Further studies on dehydration of prawns in rotary drum dryer

The paper deals with studies made to modify the process of drying of prawns in rotary drum dryer reported by the authors earlier. Prawns belonging to any species except M. monoceros can be satisfactorily dried. With M. monoceros invariably considerable adherence of shell occurs. Prawns of any size group can be dried provided in the case of medium and big size prawns they are beheaded prior to drying. In all size groups, beheading prior to drying results in better appearance of the end product in addition to the output of the dryer per charge being increased.

Preservation of Bombay duck (Harpodon nehereus) and Rohu (Labeo rohita) by gamma irradiation

The gamma irradiation procedures for preservation of Bombay duck and rohu were studied in collaboration with Bhabha Atomic Research Centre, Bombay. Irradiation at 0.1 M rad extended the storage life of Bombay duck to 20-22 days at 0-2°C due to partial destruction of spoilage organisms as against rapid deterioration of un-irradiated samples within 5-6 days. In the case of the fresh water fish, rohu, the storage life was enhanced by about 7-10 days by the same dose of irradiation over the control under identical storage condition. In all the cases, empirical relations were worked out between organoleptic rating and total volatile nitrogen.

Prediction of drained weight in canned prawn under commercial conditions

A general formula for the prediction of drained weight of canned prawn processed under laboratory condition has been worked out earlier (Chaudhuri et al., 1978). Attempts were made in this communication to modify the general formula to predict the drained weight under commercial conditions of processing particularly blanching, as the moisture content of meat depends on the quantum of heat received during blanching (Govindan, 1975).

Occurrence of Vibrio parahaemolyticus in marine prawns and environments

Qualitative studies on the microflora of slime and guts of prawns and of sea water off Nagapattinam showed the presence of Vibrio in the slime and sea water. They were further tested for Vibrio parahaemolyticus types and related bio-types. Evidence of its occurrence is given. This points to the need for further studies on the distribution of this organism in terms of public health significance.

The biology and control of Caligus sp., an ectoparasite of the adult milkfish Chanos chanos Forskal

One unidentified species of copepod belonging to the genus Caliqus of the family Caigidae was found to infest the adult milkfish broodstock. To control the parasites infesting the adult milkfish, tests were made using the chemical (2,2,2-trichloro-1-hydroxyl)-phosphonic acid-dimethylethol (Neguvon) at a concentration of 0 . 25 ppm. It is noted that a concentration of 0 . 25 ppm of Neguvon maintained for 12-24 hours in the sabalo-containing tanks in a closed water system but with aeration is effective in controlling the parasites. Fish mortality during the experiment was due to inadequate aeration in the tanks.

Fabrication of a water sampler for use in aquaculture

Details are given of the construction of a water sampler for use in aquaculture work. The equipment is 3m long, light and easy to fabricate and operate in aquaculture ponds.