Index numbers and productivity measurement in multispecies fisheries: an application to the Pacific Coast Trawl Fleet

This study is concerned with the measurement of total factor prodnctivity in the marine fishing industries in general and in the Pacific coast trawl fishery in particular. The study is divided into two parts. Part I contains suitable empirical and introductory theoretical material for the examination of productivity in the Pacific coast trawl Deet. It is self-contained, and contains the basic formulae, empirical results, and discussion. Because the economic theory of index numbers and productivity is constantly evolving and is widely scattered throughout the economics literature, Part D draws together the theoretical literature into one place to allow ready access for readers interested in more details. The major methodological focus of the study is upon the type of economic index number that is most appropriate for use by economists with the National Marine Fisheries Service. This study recommends that the following types of economic index numbers be used: chain rather than fIxed base; bilateral rather than multilateral; one of the class of superlative indices, such as the Tornqvist or Fisher Ideal. (PDF file contains 40 pages.)

Fischereiökonomie im Institut für Seefischerei - Überlegungen für zukünftige Forschungsaktivitäten

With the assignment of the head of the fisheries economics working group at the Institute of Sea Fisheries three from four envisioned positions are now filled. Responsibilities will range from data collection and processing to bio-economic modeling, value adding of the fishing sector, and the assessment of economic consequences of climate change. This also includes general advisory responsibilities on the national and international level.

A bioeconomic analysis of sustainability of marine fish production in Kerala

The study has been undertaken in Kerala State in India with an overall objective of analyzing the bio-economic conditions of commercially exploited marine fishes for assessing their sustainability in the context of existing management practices. Maximum sustainable yield, maximum economic yield and open access levels of yield and effort were analyzed using Gompertz-Fox growth model. The study concluded that the fishing effort exceeded the economically optimal levels and there is unnecessary wastage of money, manpower and fuel in the fishing industry. The study stressed the urgent need for capture fisheries management in the State which at present follows an open access fishery where regulations exist only in the form of seasonal closure in the monsoon season.

A conceptualized fishing system for the African environment with a comparative approach

The paper examines a conceptualized fishing system for the African Environment with a comparative approach. Although the fishing system has been conceived as a bio-economic complex, emphasis will be given to the explanation of the detailed structure and functioning of the system. Subsequent synthesis involving the use of existing relationships for management etc. will also be undertaken. The proposed fishing system is conceptually feasible in an ideal environment with adequate monitored data and organized fishing, however it is anticipated that the African environment will not satisfy such conditions.

Investigation on the ecological impact of constructing and activities of petrochemical industries of petrochemical special economic zone of Mahshahr on the abundance and diversity of macrobenthic fauna in Jafari Creek, north-west of the Persian Gulf

The impact of Petrochemical Special Economic Zone (PETZONE) activities on the health status of Jafari Creek was studied by assessing the changes in macroinvertebrate assemblages in nine sites during September 2006- January 2008. Furthermore to evaluate the ecological status of the Jafari Creek the WFD indices (i.e. AMBI, M-AMBI) were used. The relationship between spatial pattern of macro invertebrate assemblages and ambient factors (i.e. water temperature, salinity, pH, dissolved oxygen, turbidity, electrical conductivity, total dissolved solid, total hardness, total nitrogen, ammonia, total phosphorous, chemical oxygen demand, biological oxygen demand, sediment grain size distribution, sediment organic content, heavy metals contents) was measured. Background Enrichment indices, Contamination factor and Contamination degree, were used to assess the health status in the study area based on Nickel, Lead, Cadmium and Mercury contents of the sediments. The macrobenthic communities had a low diversity and were dominated by opportunistic taxa, and the AMBI and M-AMBI indices need to be calibrated before using in Persian Gulf and its coastal waters. The BIO-ENV analysis identified pH, dissolved oxygen, TDS, and the total organic content of sediments as the major environmental variables influencing the infaunal pattern. This suggests that management should attempt to ensure minimal disturbance to environmental variables underlying the spatial variation in macroinvertebrate assemblages. Background Enrichment indices showed that the health of Jafari Creek has declined over time due to the constant discharge of heavy metals to the Creek system. Furthermore WQS index shows that the quality condition of the water column in Jafari Creek, regard to the calculated number (3) is week. These indices also identified a significant degree of pollution in the study area. The decrease in the ecological potential of Jafari Creek was best highlighted by the alteration in macrobenthic assemblages.

A simple and objective bioeconomic index for choosing species for culture

Details are given of the development of a bioeconomic culture index that may be used to assist in choosing fish for culture. This index takes into account growth performance indexes and mean annual prices of the fish. Examples are given of the culture indices of some of Kuwait's commercially important fish species. The proposed indices given realistic output for these fish and allow comparison and evaluation of different taxa with widely differing biological and economic characteristics.

An investigation on benthic macro-invertebrates species diversity as bio-indicators of environmental health in Bahrekan Bay

The purpose of this study was to evaluate benthic macro-invertebrates species diversity as bio-indicators of environmental health in Bahrekan bay (in the Northwest of Persian gulf). Seasonal sediments sampling along 5 transects, 15 stations at 4 replicates (3 replicates for macrobenthos and 1 replicate for sediment analysis) was done from November 2008 to August 2009 by 0.025 m2 Van Veen grab sampler. Physical and chemical parameters of water, grain size analysis, %TOM and Ni and Va concentrations of sediments were assessed through four seasons. Macrobenthic communities after staining and sorting, using stereomicroscope have been identified. Their density in every station and every season calculated. For using of AMBI index, identified macrobenthos according to their sensitivity to stressors and pollutants, categorized into 5 ecological groups and for using of Bentix index categorized into 3 ecological groups. The diversity indices and indicators that showing ecological status were calculated. Also, the differences between physiochemical parameters of sea water, sediments TOM% and grain size, diversity indices in stations and seasons were recorded (P=0.05). The correlation coefficient determined for all parameters. According to the results of grain size analysis, bottom grain size categorized as clay. Highest percent of TOM was belong to autumn (36.39±.075) and lowest was belong to summer (19.01±0.51). Also there was positive correlation (p=0.01) between %TOM and %Clay that showing sediments with lowest size containing highest amounts of organic matters. Ni concentrations in sediments (87.80±21.25)mg/kg showed the amounts over than standards levels but Va concentrations in sediments (53.54±17.60)mg/kg showed the amounts lower than standards level. The highest density of macrobenthos was recorded for summer (8254±485) N/m2 and the lowest density was recorded for spring (3775±172)N/m2. The highest annual density was belong to mollusca (81%) and then polycheates (13%), Others (4%) and crustaceae (2%). The highest diversity was recorded for winter (Simpson index: 0.13±0.01, H':3.47±0.06) and the lowest diversity recorded for autumn (Simpson index: 0.16±0.01, H':3.17±0.06). in all stations, the highest amount of Shanon index was belong to T2S3 station in summer (4.11± 0.32) and the lowest amount was belong to T1S1 station in autumn (2.42± 0.41). The annual mean of Simpson diversity index: (0.15 ±0.04) and Shanon diversity index (3.36±0.03), illustrated that macrobenthos in Bahrekan bay have a good variation. The results of Brilluin and N1 (Number of equally common species) indices confirm the results of Simpson index. For study on the regions that diversity has a little difference between stations, with use of Ni index, the degree of differences could be better ono recognizable. According to the results of AMBI index in all seasons (autumn: 0.46±0.03; summer: 0.22±0.01; annual mean:0.31±0.01) and standards (0.0index in all seasons (autumn: 5.07±0.07; summer: 5.57±0.02; annual mean: 5.40±0.02) and standards (4.5index present accurate assessment rather to Bentix index. AMBI can be used successfully in ecosystems like to study area for detecting the pollutant and disturbance recourses.

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.